Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i User Guide 1
LEGAL INFORMATION DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the products Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i are in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokiausa.com/phones/declaration_of_conformity/. PART NO. 9235986, ISSUE NO. 1 Copyright ©2005 Nokia. All rights reserved.
with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Contents Contents For your safety 5 1. Phone at a glance.................................................................... 10 2. Set up your phone................................................................... 15 3. Text entry ................................................................................. 22 4. Messages .................................................................................. 25 5. Call log .................................................................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen.
For your safety ■ Shared memory The following device features may share memory: contacts; text messages; photos, images, and tones in Gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing.
Welcome Welcome Congratulations on your purchase of the Nokia 6235, Nokia 6235i, Nokia 6236, or Nokia 6236i mobile phone. Your device provides many functions that are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, camera, FM radio, and more. Your device can also connect to a PC, laptop, or other device using a data cable or infrared. To personalize your device you can set your favorite ringing tones.
Welcome Ajax, Ontario L1S 4N7 Tel: 1-888-22-NOKIA (1-888-226-6542) Fax: 1-905-619-4360 Updates From time to time, Nokia updates this guide to reflect changes. The latest version and an interactive tutorial for this product may be available at the Web site www.nokiausa.com. Accessibility solutions Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at www.nokiaaccessibility.com.
Phone at a glance 1. Phone at a glance 1. Power key 2. Earpiece 3. Headset connector 4. Five-way joystick 5. Right selection key 6. End key 7. Pop-Port™ connector 8. Microphone 9. Charger port 10. Keypad 11. Call key 12. Left selection key 13. Display screen 14. Volume key ■ The start screen Depending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear on the start screen.
Phone at a glance Names or network operator menu item (3)—Press the Right selection key to select this option. Go to(4)—Press the Left selection key to select this option. Signal strength (5)—A higher bar indicates a stronger network signal. ■ Quick keys Depending on your wireless service provider and the model number of your device, some or all of the following joystick shortcuts may be available from the start screen. Scroll up—Activate camera from standby mode. Scroll right—View calendar.
Phone at a glance Voice privacy encryption is active in the network. or Location info sharing is set to Emergency or ON. See Location info sharing, 65. You are in a digital network. See ’Network Services,’ p. 6. You are in an analog network. See ’Network Services,’ p. 6. You are in a 1XRTT network. See ’Network Services,’ p. 6. You are roaming outside your home network. See ’Roaming options,’ p. 77. ■ Get the most out of this guide The following sections illustrate the various components of your phone.
Phone at a glance Scroll method You can use the joystick to move up, down, left and right through the options. Press the joystick to select an item. 1. At the start screen, select Menu, and scroll through the main menus using the joystick. As you scroll through the menus, the menu number appears in the upper right corner of the display. On the right side of the display screen is a scroll bar with a tab that moves up or down as you scroll through the menus.
Phone at a glance 2. Use the joystick to scroll up or down and highlight the function you wish to rearrange, and select Move > Move up, Move down, Move to top, or Move to bottom. 3. Select Done > Yes to save the changes. In-phone help Many features have brief descriptions (help text) that can be viewed on the display. To activate help text, at the start screen, select Menu >Settings > Phone settings > Help text activation > On or Off.
Set up your phone 2. Set up your phone ■ Antenna In the Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i phones, the antenna is internal and located towards the top of the device. A GPS antenna is activated when you place an emergency call or when you select On from the Location info sharing menu. See ’Location info sharing,’ p. 65. Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder.
Set up your phone Remove the back cover With the back of the device facing you, slide the back cover toward the bottom of the device and remove. Remove the battery After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment. UIM (CDMA SIM) card slot Your device has a UIM card slot built into the mechanics, located under the battery. The UIM is not functional in this model. Do not place any objects in this slot. Replace the battery 1.
Set up your phone Important: Do not remove the front cover of this device. Attempts to remove the front cover may damage the device. If your device requires service, contact Customer Care. See ’Contact Nokia,’ p. 8. Charge the battery 1. Plug the charger transformer into a standard ac outlet. 2. Insert the charger output plug into the round jack at the bottom end of the device. After a few seconds, the battery indicator in the display starts to scroll from bottom to top.
Set up your phone • Press the end key to end a call. You can also plug a compatible headset, such as the HS-9 Universal Headset, into the 2.5 mm headset jack on your device to allow hands-free operation. See ’Enhancements,’ p. 98. ■ Change front cover Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.
Set up your phone ■ Answer calls Answer or silence an incoming call • Press the call key or select Answer to answer the call. • Press the end key to reject the call. • Select Silence to mute the ringing tone then select Dismiss, or do nothing and the call is eventually diverted to voicemail. If your device is set to Silent in the Settings >Profiles menu, select Dismiss, and the call is rejected and diverted to voicemail.
Set up your phone Options during a call Many of the options that you can use during a call are network services. Check with your wireless service provider for more information. 1. Select Options during a call to display the following: Loudspeaker/Normal—Activate or deactivate the loudspeaker while in a call. New call—Initiate a conference call. See ’Conference calling,’ p. 21. Save—Add a number while in a call to your contact list. This option is available only when entering numbers during a call.
Set up your phone Use the keypad 1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear. 2. Press the end key to end the call or select End call to cancel the call attempt. Use the last dialed number 1. At the start screen, press the call key to display the last 30 numbers dialed. 2. Select the number (or name) you wish to redial, and press the call key.
Set up your phone Unlock the keypad Select Unlock; then press * within two seconds.
Text entry 3. Text entry You can use two methods for entering text and numbers: Standard mode and Predictive text mode. • Select Clear to backspace the cursor and delete a character. • Select and hold Clear to backspace continuously and delete characters. ■ Standard mode Standard mode is the only way to enter text into the contacts list and to rename caller groups. Text (Abc) • Press a key once to insert the first letter on the key, twice for the second letter, etc.
Text entry joystick. Once a character is highlighted, select Insert to insert the character into your message. ■ Predictive text mode Predictive text mode allows you to write messages quickly using your keypad and the built-in dictionary. Predictive mode is much faster than the standard mode method because you only press the corresponding key on your keypad once for each letter. Activate or deactivate 1. At any text entry screen, select Options > Dictionary on/Dictionary off. 2.
Text entry Lowercase text: standard mode is on. Sentence case text: standard mode is on. This option is available only at the beginning of a sentence. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.
Messages 4. Messages If you have subscribed to a message network service, you can send and receive messages to compatible phones that also subscribe to a message service. If supported by your service provider, you can also send and receive multimedia messages, and e-mail. See ’Text entry,’ p. 24. When composing text messages, picture messages, or multimedia messages, the number of characters allowed appears in the top right corner of the message. The use of special (Unicode) characters takes up more space.
Messages Insert picture—Insert a picture from Templates folder into your message. Change picture—Change the picture in a picture message. Delete picture—Delete the picture in a picture message. Insert contact—Insert a name from your contacts list into your message. Insert number—Insert a phone number or find a phone number in the contacts list.
Messages To use, rename, or modify a distribution list highlight the distribution list and select Options > Create new list, Send text msg., Send multimedia, Rename list, Clear list, or Delete list. Templates Templates are short, prewritten messages that can be recalled and inserted into new text messages. 1. At the start screen, select Menu > Messages > Text messages > Create message > Options > Use template. 2. Select one of the available templates. 3.
Messages Save—Save the message to Sent items, Archive, Templates, or a folder you have created. Forward—Forward the message to another phone number or e-mail address. Rename—Edit the title of the message. Reply to message 1. Select Reply > Empty screen, Original text, Template, or one of the predefined answers, then compose your reply using the keypad. 2. Create the reply, and select Send. The sender’s phone number or e-mail is used as the default. Change sending options 1.
Messages new messages. However, you can set your device to automatically replace old messages in the Inbox and Outbox folders when new ones arrive. Save sent messages—Select Always save, Always prompt, or Off. Queue msgs. when digital unavailable—Select On, On prompt, or Off. Messages are stored in the Outbox until they can be sent with digital service. ■ Picture messages Your device comes with five preloaded pictures. You can save more pictures.
Messages 3. Open the folder that contains the picture you want to insert and select Options > Insert. To view another picture, select Back or Options > Insert, scroll to another picture, and select Options > Insert. 4. Select Search to retrieve a phone number from your contacts list, Send to enter the phone number, or Options > Send to e-mail, Send to many, or Send to distrib. list (if a distribution list has been created) > Select.
Messages • Sound: SP-MIDI, AMR audio, QCELP, EVRC, and monophonic ringing tones • Video: clips in H.264 (Profile 0, level 10) format with MPEG-4 (SVPO), 3GPP, 3GPP2, with AMR audio If a received message contains unsupported elements, these elements may be replaced with the text Object format not supported. You cannot receive multimedia messages if you have a call in progress, games or other applications running, or an active browsing session.
Messages When messages are available, you are notified 1 multimedia message available or %N multimedia messages available. Allow or block advertisements This setting is not available if multimedia reception is blocked. From the start screen, select Menu > Messages > Multimedia msgs. > Message settings > Allow advertisements > Yes or No. Other MMS settings Other multimedia settings include saving your messages to the Sent items folder. From the start screen, select Menu > Messages > Multimedia msgs.
Messages Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded. 4. To add a new page or slide to the message, select Options > Insert > Slide. This applies only if there is no video clip in the message Each slide can contain text, one image, and one sound clip. If the message contains several slides, you can open the desired slide by selecting Previous slide, Next slide, or Slide list. 5.
Messages displays and you can use other functions on the device. If there is an interruption while the message is being sent, the device automatically tries to resend it a few times. If this fails, the message remains in the Outbox folder and you can try to manually resend it later. Check your Outbox folder for unsent messages. Note: When sending messages, your device may display the words Multimedia message sent.
Messages While viewing the message, select Play to view the entire MMS, or select Options > Save image, Save sound clip, or Save video clip to save the file to the Gallery. Images, sound clips, and video clips must be opened before you can save them. If blinks and Multimedia me-mory full. View waiting msg.displays, memory for multimedia messages is full. To view the waiting message, select Show. Before you can save the message, delete some of your old messages. See ’Delete messages,’ p. 39.
Messages Listen to voice messages Once you have set up voice mail, press and hold 1 or use the Messages menu to dial the voice mailbox number. Once you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages. Automate voice mail You can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a 1-touch dialing location.
Messages See ’Mobile internet access,’ p. 91, for more information on using the Minibrowser in your device to access Web pages. ■ Text message folders Save messages You can save drafts of messages or received messages to an existing folder or to a folder that you have created. 1. Open the received message or create a new message, and select Options. 2. To save a received message, select Save > Sent items, Archive, Templates, or a folder you have created. 3.
Messages ■ Delete messages If your message memory is full and you have more messages waiting at the network, No space for new text messages appears on the start screen. You can do the following: • Read some of the unread messages, and delete them individually. • Delete messages from some of your folders. Delete a single message 1. At the start screen, select Menu > Messages > Text messages. 2. Select the folder containing the message you wish to delete. 3. Select the message you wish to delete. 4.
Messages ■ Delete folders Only folders created in My folders can be deleted. The Inbox, Sent items, Archive and Templates folders are protected. When you delete a folder, all messages in the folder are also deleted.
Call log 5. Call log Call log stores information about the last 30 missed, 30 received, and 30 dialed calls. It also adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest. Whether viewing missed, received, or dialed calls, the menu options are the same: Time of call—Displays the date and time of the call. Send message—Sends a message to the number. Use number—Edits the number and associates a name with the number.
Call log 3. Select an option to view or activate. ■ View dialed numbers Dialed calls are previous numbers you have dialed from your device: 1. At the start screen, press the call key. OR At the start screen, select Menu > Call log > Dialed numbers. 2. Scroll to a name or number, and select Options. 3. Select an option to view or activate. View call times You can make or receive calls to or from the same number and view up to five calls with the time each call occurred.
Call log Note: All call timers, except the life timer, are reset to zero when Clear timers is selected. Note: Some timers, including the life timer, may be reset during service or software upgrades. To activate the call timer on the start screen while in a call, select Details > Show call time on display > On or Off. ■ View duration of data and fax calls Data and fax calls are a network service. See ’Network Services,’ p. 6.
Call log 2. Scroll to one of the following options: Last sent browser data—View the size (KB) of the last sent browser data. Last received browser data—View the size (KB) of the last received data. All sent browser data—View the size (KB) of all sent browser data. All received browser data—View the size (KB) of all received browser data. Last browser session—View the duration time of the last browser session. All browser sessions—View the duration time of all browser sessions.
Contacts 6. Contacts The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list. ■ Add new contacts You can access the contacts list at the start screen. Press the Right selection key or, if the Right selection key on your device has a network operator menu, select Menu > Contacts. Save contact name and number 1.
Contacts 2. Scroll to an (empty) 1-touch dialing slot and select Assign. 3. Enter your mailbox number, including the area code. 4. Refer to dialing codes and enter any codes as necessary. For example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp. 5. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK. 6. Enter a name (such as Voice Mail), and select OK.
Contacts 3. Enter the number or text for the type you have selected, and select OK. 4. To change a number type (General, Mobile, Home, Work, or Fax), select Change type in the options list. You can also change which phone number is the default (primary) number for the contact entry. 1. At the start screen, use the joystick to scroll down and select the number you wish to change, and select Details. 2. Scroll to the number you wish to set as default, and select Options > Set as default.
Contacts Assign a key to 1-touch dialing 1. At the start screen, select Menu > Contacts > 1-touch dialing. 2. Scroll to an (empty) 1-touch dialing slot, and select Assign. 3. Enter the number (including the area code), and select OK; or select Search to retrieve a number from the contacts list. 4. Enter a name for the number, and select OK. If 1-touch dialing is off, the device displays a prompt asking if you would like to turn 1-touch dialing on. 5. Select Yes to activate 1-touch dialing.
Contacts Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely upon voice dialing in all circumstances. Assign a voice tag to an entry Before you can use voice dialing, you must first assign a voice tag to the number. 1. At the start screen, press the joystick down to view the contacts list. 2. Highlight the contact you want to assign a voice tag to. Select Details > Options > Add voice tag > Start. 3. Speak clearly into the microphone.
Contacts Add voice tag—Add a voice tag to the contact. Edit number/Edit detail—Edit an existing phone number or the details attached from the contact. Delete number/Delete detail—Delete a phone number or the details attached from the contact. Use number—Edit the number and associate a name with the number. Available when a contact is selected that is listed with a contact name. Select Options to use the number.
Contacts 4. To delete the entire contents of your contacts list, select Delete all > Yes. 5. Enter the lock code, and select OK. See ’Security settings,’ p. 74. ■ View the contacts menu 1. At the start screen, select Menu > Contacts and view the following options: Search—Find a name or select from a list. Add new—Add a contact to your contacts list. Edit name—Edit an existing name. Delete—Delete a name and its associated numbers. Add number—Add a number to an existing contact.
Contacts At the start screen, select Menu > Contacts > Settings >Scrolling view to change view of name list, or Memory status to view the device memory used and remaining. ■ Send and receive contacts (business cards) You can send and receive an entry in your contacts list using text messaging, if supported by your wireless provider. Send a business card You can send a business card as a text message to a compatible phone or other handheld device. 1.
Camera 7. Camera You can take photos and record video clips with the built-in camera. The camera lens is on the back of the device. The camera produces photos in JPEG format and video clips in H.263 (SubQCIF) format. After you take a picture or video, you can attach it to a multimedia message, send it with MMS, save it as a wallpaper, save it on a compatible PC using Nokia PC Suite software, and upload it to a Web address with the content image uploader.
Camera Set contrast—Use the joystick to adjust the contrast of the captured photo. Set as wallpaper—Use a captured photo for wallpaper. Details—View the Name, Size, Created, Format, Resolution, or Copyright of a captured photo. Change mode At the start screen, select Menu > Camera >Options > Change mode or, from the viewfinder mode, hold and press the right or left joystick position to switch between the following modes: Standard photo—Take normal landscape photos.
Camera Camera sounds—Select On or Off. Default title—Select Automatic to use a predefined title or My title to key in or edit a new title. Image and video storage—Select the folder for image storage. Other options Zoom—Zoom in closer to your image before capturing a photo or get a closer look at the captured photo. Use the joystick to navigate around the photo. Flash on or Flash off—Select to capture a photo with or without the flash. View previous—View the previously captured photo.
Gallery 8. Gallery You can save pictures, video clips, recordings, and ringing tones to folders in the gallery and add new folders to the ones already there. Images and tones can be downloaded using MMS, SMS, mobile Internet sites, or Nokia PC Suite. Note: Only compatible devices that offer compatible multimedia message features can receive and display multimedia messages. Your device supports a digital rights management system to protect content that you have acquired.
Gallery Rename folder—Rename a folder you have created. You cannot rename a preset folder. Details—Show the name, size, and date of creation of the selected folder. Type of view—Select List or Grid to determine how the folders and the files within folders are displayed. Sort—Sort the contents of the selected folder by name, date, format, or size. Add folder—Create a new folder. Memory status—Check the available memory for the device handset. Activation key list—View the list of available activation keys.
Media 9. Media ■ Media player With the media player you can download, view, and play compatible images, audio and video files, and animated images from a variety of sources. The media player allows you to play streaming videos and streaming audio from a network server. Streaming functionality is a network service and requires network support. Check the availability of these services, pricing, and tariffs with your network operator or the service provider whose service you wish to use.
Media Use the radio With the radio on, select Options and one of the following: Turn off—Turn off the radio. Save channel—Save the current station to one of 20 locations. Automatic tuning—Press the joystick up or down to start the channel search. Select OK when a channel is found. Manual tuning—Press the joystick up or down to search in increments of 0.05 MHz. Set frequency—Manually enter the frequency of a known radio station. Delete channel—Delete a saved channel.
Media To save an FM station quickly to 1–9 memory locations, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel, and select OK. ■ Voice recorder This feature allows you to record pieces of speech or sound with your device and listen to them later. The total available time is 3 minutes if no memos have been stored. The maximum length of a recording depends on how much memory remains available.
Media Activate an equalizer set From the start screen, select Menu > Media > Media equalizer, scroll to the desired setting, and select Activate. Create a custom equalizer set 1. From the start screen, select Menu > Media > Media equalizer. 2. Scroll to Set 1 or Set 2, and select Options > Edit. The selected set appears in the display with the bar on the far left highlighted.The bars adjust frequencies, from the lowest (the leftmost bar) to the highest (the rightmost bar).
Settings 10. Settings Use this menu to change profiles, tone settings, time and date settings, call settings, phone settings, voice commands, enhancement settings, security settings, application settings, network settings, network services, and restore factory settings. ■ Profiles Profiles define how your device reacts when you receive a call or message, how your keypad sounds when you press a key, and more.
Settings 1. At the start screen, select Menu >Settings > Profiles. 2. Select the profile you wish to activate and select Timed for timed expiration. 3. Enter the time in mm:ss for the profile to expire, and select OK. ■ Display settings Wallpaper You can set your device to display a background picture (wallpaper) on the start screen. 1. At the start screen, select Menu >Settings > Display settings > Wallpaper > Select wallpaper > Graphics > Open. 2. Browse the Graphics folder. 3.
Settings At the start screen, select Menu >Settings > Display settings > Backlight timeout > 15 seconds or Customize. ■ Screen saver From the start screen, select Menu >Settings > Display settings >Screen saver > On, Off, Select s. saver, or Time-out (10 seconds, 30 seconds, or Other). ■ Tone settings You can adjust the ringing volume, keypad tones, and more for the active profile. See ’Customize a profile,’ p. 62, for more information on profile settings.
Settings Set the auto-update of date and time Auto-update is a network service. See ’Network Services,’ p. 6. If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone. At the start screen, select Menu >Settings > Time and date settings > Autoupdate of date & time > On, Confirm first, or Off.
Settings Note: Location information will always be shared with the network during emergency calls to the official emergency number programmed into the device, regardless of which setting is selected. After placing an emergency call the device remains in emergency mode for five minutes. During this time, the location information will be shared with the network. See ’Emergency calls,’ p. 104.
Settings Save information 1. At the start screen, select Menu >Settings > Call settings > Calling card. 2. Enter your lock code, and select OK. See ’Change lock code ,’ p. 75. 3. Scroll to one of the four card memory locations, and select Options > Edit > OK > Dialing sequence. 4. Select one of the following sequence types: Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number, then card number (+ PIN, if required). Access no.+ card no.+ phone no.
Settings International prefix You can store an international dialing prefix into your device. When you enter + at the beginning of a phone number, your device automatically inserts the international dialing prefix that you have stored after you press the call key. See ’Insert dialing codes,’ p. 46. Data or fax calls Data or fax calling is a network service. See ’Network Services,’ p. 6.
Settings Ringing tone for no caller ID You can select a different ringing tone for calls received with no caller ID. From the start screen, select Menu >Settings > Call settings > Ringing tone for no caller ID > On or Off. See ’Customize a profile,’ p. 62, for more information on selecting a ringing tone. ■ Phone settings Phone language 1. At the start screen, select Menu >Settings > Phone settings > Phone language. 2. Scroll to the language of your choice and press Select.
Settings Set length You can specify touch-tone length for the Fixed option. At the start screen, select Menu >Settings > Phone settings > Touch tones > Touch tone length > Short (0.1 seconds) or Long (0.5 seconds). Memory status You can view the size of memory available on your device. At the start screen, select Menu > Settings > Phone settings > Memory status > Size, Free memory, Used memory, Contacts, Gallery, Organizer, or Multimedia msgs..
Settings The default setting for help text is On. However, you can turn help text on or off. At the start screen, select Menu >Settings > Phone settings > Help text activation > On or Off. ■ Infrared activation If supported by your wireless provider, you can send and receive contacts (business card) as a text message to a compatible phone or other handheld device using the infrared port. See ’Infrared,’ p. 79. Send a business card 1. At the start screen, select Menu >Settings > Infrared. 2.
Settings • Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. • Very short names are not accepted. Use long names and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely upon voice dialing in all circumstances.
Settings Options After you have associated a voice tag to a command, you can select one of the following options: Change—Change the voice command. Delete—Erase the voice command tag. ■ Enhancement settings The enhancement settings menu is shown only if the device has been connected to a compatible enhancement. At the start screen, select Menu > Settings > Enhancement settings > Headset, Handsfree, Loopset, TTY/TDD, or Charger.
Settings Automatic answer—Answer calls automatically after one ring when a loopset is connected. Select On or Off. TTY/TDD Check with the manufacturer of the TTY/TDD device for a connecting cable that is compatible with the Nokia device. TTY/TDD communications depend on network availability. Check with your service provider for availability and description of services. Charger Select the option of your choice to enter the submenu and modify its settings.
Settings When the device is locked, calls still may be possible to the official emergency number programmed into your device. Call not allowed is displayed if you attempt to place a call while your device is locked. To answer a call with phone lock on, select Answer or press the call key Allow numbers when phone locked When phone lock is on, the only outgoing calls that can be made are to the emergency number programmed into your device (for example, 911) or the number stored in the Allowed no.
Settings When you change your lock code, make sure you store it in a safe place, away from your device. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls. Call restrictions Call restrictions is a network service. See ’Network Services,’ p. 6. If your wireless service provider supports this feature, you can restrict the calls your device makes and receives.
Settings your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu. Roaming options You can set your device to roam or search for another network when you are not in your home area. 1. At the start screen, select Menu > Settings > Network > Roaming options. 2. Select one of the following options: Home only—You can make and receive calls in your home area only.
Settings 3. Select the type of service that matches the feature code you entered (for example, Call forwarding). The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the start screen. Once you enter a network feature code successfully the feature becomes visible in the Network services menu.
Settings Call waiting If your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call. 1. At the start screen, select Menu > Settings > Network services > Call waiting > Activate or Cancel. 2. During a call, select Answer or press the call key to answer the waiting call. The first call is put on hold. 3. Press the end key to end the active call.
Settings Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. Send and receive data 1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices in an IR connection is from 3 inches to 3 feet. 2. Activate IR in your device by selecting Menu > Settings > Infrared. 3.
Organizer 11. Organizer Your device contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch. ■ Alarm clock If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls.
Organizer Alarm conditions When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for currently active profile), and the display lights up. With the device on, select OK to shut the alarm off, or select Snooze. The alarm stops for 10 minutes and Snooze on appears in the display. If you do not press a key, the alarms stops (snoozes) for 10 minutes, then sounds again.
Organizer Note a specific date You can apply five types of notes to your calendar. Your device asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select. 1. Go to the date for which you want to set a reminder. See ’Go to a date,’ p. 82. 2. From the monthly view (with the go-to date highlighted), select Options > Make a note. 3.
Organizer Repeat—Set the note to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly). Go to date—Jump to another date on your calendar. Send note—Send the note to another device as a text message or in calendarto-calendar (vCal) format by way of multimedia messages, SMS, or IR. Copy—Copy the note, which you can then paste to another date. Settings—Set the date and time, date and time format, the day each week starts and whether you want your notes to auto-delete after a specified time.
Organizer • To save calendar notes after viewing, select Options > Save. • To discard calendar notes after viewing, select Options > Discard or select Exit. When you receive a calendar note or text message, a message notification appears on the start screen. You can save the note in your calendar and set an alarm for any date and time. ■ Notes You can write and save information in Notes, and send notes via multimedia, text message, or infrared. From the start screen, select Menu > Organizer > Notes.
Organizer 2. Highlight a to-do note, and select Options to select from the following: Add—Add another note (available only in header view). Delete—Delete the note. Mark note as done—Mark a note or task as complete; no more reminders will follow. Sort by deadline—Sort the notes according to their deadline. Send—Send the note to another device using IR, as a text or multimedia message, or as a calendar note to another compatible device. Go to calendar—Leave the to-do list, and go to the calendar.
Organizer 1. At the start screen, select Menu > Organizer > Calculator. 2. Enter the first number in the calculation. Press # for a decimal point if necessary. To perform a square or square root calculation, select Options > Square or Square root. To cycle through the add (+), subtract (-), multiply (*), and divide (/) characters, press *. Pause briefly to select the displayed character. To change the sign, select Options > Change sign, or scroll up or down. 3. Enter the second number in your calculation.
Organizer ■ Countdown timer You can enter a specified time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm. Note: The countdown timer only works when the device is on. Once you turn off your device, the timer is no longer active. Set the countdown timer 1. At the start screen, select Menu > Organizer > Countdown timer. 2. Enter the time (in hh:mm format), and select OK. 3. Enter a note for the timer, and select OK.
Organizer Measure time 1. At the start screen, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start. The running time displays. Split timing—You can use the split time function for such things as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list.
Organizer Continue—Appears when the stopwatch is working in the background. Show last time— Appears when you have saved a split or lap time. Displays the last time saved. Split timing—Asks if you want to discontinue previous timing. Lap timing—Asks if you want to discontinue previous timing. View times—Allows you to browse the saved times. Delete times—Allows you to delete any saved times. You can delete the saved times one by one or all at once.
Mobile Web 12. Mobile Web Minibrowser is a network service. See ’Network Services,’ p. 6. Your device has a built-in browser you can use to connect to selected services on the mobile internet. If your wireless service provider supports this feature, then you can view weather reports, check news or flight times, view financial information, and much more. The Web browser on your device can display WAPbased content. Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Mobile Web ■ Navigate the mobile Internet Since your device screen is much smaller than a computer screen, mobile Internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using the keys to navigate a WAP site. Phone keys • Press the Power key to display the Minibrowser home screen. • Scroll up or down to browse the WAP site. • Select an item. • To enter letters and numbers, press a key from 0–9. • To enter special characters, press *.
Mobile Web Clear the cache and disconnect A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache while in the browser menu, select Navigate > Advanced > Clear > Cache from the home page. You can also clear the cache by pressing and holding the Power key to power off your device.
Extras 13. Extras Challenge yourself or a friend to one of the fun games in your device. Some menus listed are network services. Contact your wireless provider for more information. When you download games or applications, they may be saved in either the Games or the Collection folders. ■ Games At the start screen, select Menu > Extras >Games to display the games on your device: 3D Snow Boarding, Nokia Puzzle, Club Pinball, and Bounce. ■ Collections Collections is a network service.
PC Connectivity 14. PC Connectivity ■ USB data transfer You can transfer data such as music, photos, and videos from your device to a compatible PC, or from a compatible PC to your device using a DKU-2 USB data cable. The cable is connected to your device correctly when the arrowhead points toward the display screen. Disconnect the USB data cable from the device to make a call. Use the Nokia Audio Manager software to handle your music files and transfer them from the PC to the memory card in your device.
PC Connectivity 8. Disconnect the USB cable by double-clicking the green arrow on the taskbar at the bottom of your PC screen. A window pops up that shows Unplug or Eject Hardware. 9. Click on USB device in the hardware devices window. A popup window shows Stop a Hardware device. 10. Highlight USB device and click OK. The popup window Safe to Remove Hardware is shown with the message The ‘USB Device’ device can now be safely removed from the system. Select OK.
PC Connectivity • Nokia PC Sync synchronizes the contacts directory and calendar between your device and a compatible PC. • Nokia Connection Manager selects the connection type between the PC and the device. • Nokia Phone Browser copies images and tones from your device to your PC and vice versa. Copyright protection may prevent some images, ring tones, and other content from being copied, modified, transferred or forwarded.
Enhancements 15. Enhancements Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7 or ACP-12. Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer.
Reference information 16. Reference information ■ Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery.
Reference information Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage and enjoy your device for many years. • Keep the device and all of its parts and accessories out of the reach of small children. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
Additional safety information Additional safety information ■ Operating environment Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your device immediately. HEARING AIDS Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.
Additional safety information permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standards for wireless mobile devices employ a unit of measurement known as the Specific Absorption Rate, or SAR.
Additional safety information *In the United States and Canada, the SAR limit for mobile phone used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions, please look under product information at www.nokiausa.
Additional safety information Talk time: 3 to 3.
Additional safety information ■ Nokia one-year limited warranty Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product.
Additional safety information 7.
Additional safety information c) The Consumer shall include a return address, daytime phone number and/ or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty. d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.
Additional safety information AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Additional safety information 16. Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Service 7725 Woodland Center Blvd., Ste. 150 Tampa, FL 33614 Telephone: 1-888-NOKIA-2U (1-888-665-4228) Facsimile: (813) 249-9619 TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542) 17. The limited warranty period for Nokia supplied attachments and accessories is specifically defined within their own warranty cards and packaging.
Additional safety information Appendix A Message from the CTIA (Cellular Telecommunications & Internet Association) to all users of mobile phones © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.
Additional safety information Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice—almost anywhere, anytime—with the boss, with a client, with the kids, with emergency personnel or even with the police.
Additional safety information 3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations.
Additional safety information emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand.
Additional safety information Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones. ©July 18, 2001For updates: http://www.fda.
Additional safety information Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode.
Additional safety information • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level.
Additional safety information called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits. 4. What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods.
Additional safety information years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones.
Additional safety information energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement.
Additional safety information 9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone? If there is a risk from these products—and at this point we do not know that there is—it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF).
Additional safety information 11.What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI).
Additional safety information July 18, 2001For updates: http://www.fda.
