User Manual

Table Of Contents

4. Make calls

Proximity sensor

Your device has a proximity sensor. To prevent accidental selections, the touch screen

is disabled automatically during calls when you place the device next to your ear.

Do not cover the proximity sensor, for example, with protective film or tape.

Calls

1. In the home screen, select Dialler to open the dialler, and enter the phone number,

including the area code. To remove a number, select C.

For international calls, select * twice for the + character (which replaces the

international access code), and enter the country code, area code (omit the leading

zero if necessary), and phone number.

2. To make the call, press the call key.

3. To end the call (or to cancel the call attempt), press the end key.

Pressing the end key always ends a call, even if another application is active.

To make a call from the contacts list, select Menu > Contacts. Go to the desired name.

Or, select the search field, enter the first letters or characters of the name, and go to the

name. To call the contact, press the call key. If you have saved several numbers for a

contact, select the desired number from the list, and press the call key.

During a call

To mute or unmute the microphone, select or .

To put a call on hold or activate the held call, select

or .

Do not hold the device near your ear when the loudspeaker is in use, because the volume

may be extremely loud. To switch back to the handset, select

To end the call, select

To switch between the active and held calls, select Options > Swap.

Tip: When you have only one active voice call, to put the call on hold, press the

call key. To activate the held call, press the call key again.

To send DTMF tone strings (for example, a password), select Options > Send DTMF.

Enter the DTMF string or search for it in the contacts list. To enter a wait character (w)