E66 User Guide 5555555 Issue 1 Cyan Magenta Yellow Black
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-494 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/phones/ declaration_of_conformity/. 0434 © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Original Enhancements logos, Eseries, E66, and Visual Radio are trademarks or registered trademarks of Nokia Corporation.
For the most current product information, please refer to www.nokia.com.cn. Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors.
Contents Safety...........................................................7 About your device...........................................................7 Network services.............................................................8 Battery removing............................................................8 E66 in brief...................................................9 Key features.....................................................................9 Keys and parts....................................
Messaging folders.........................................................44 E-mail messages............................................................45 Write and send text messages....................................47 Multimedia messages...................................................47 Instant messaging........................................................48 Messaging settings.......................................................49 Phone.........................................................
Battery and charger information................................90 Nokia battery authentication guidelines...................91 Care and maintenance...............................93 ........................................................................................93 Additional safety information...................95 Small children................................................................95 Operating environment................................................95 Medical devices.................
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions.
and other security software on your device and any connected computer. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.
E66 in brief Model number: Nokia E66. Access your e-mail while on the move. Key features Stay up-to-date and plan your meetings with Calendar. Your new Eseries device helps you manage your business and personal information in and out of office. Some of the key features are highlighted here: Switch from business to personal mode. Browse the internet, find blogs and receive news feeds with Web. Manage your business partners and free time friends with the new Contacts application.
Keys and parts 10 1 — Power key 2 — Earpiece 3 — Light sensor 4 — Selection key. Press the selection key to perform the function shown above it on the display. 5 — Call key 6 — Press the key for a few seconds to switch on Bluetooth connectivity. When writing text, press the key and select More symbols to access special characters. 7 — Microphone 8 — Navi™ scroll key, hereafter referred to as the scroll key. Press the scroll key to enter a selection, to scroll left, right, up, and down on the display.
4 — Capture key 5 — Release button 6 — Headset connector 7 — Micro-USB port 8 — Infrared port control and status panes, press either selection key. The image changes to full screen in RealPlayer, browser, and image viewer. To turn off the automatic display rotation or changing to full screen, select Menu > Tools > Settings > General > Personalisation > Display > Display rotation or Turn to full view.
Scroll key lights When you receive a message or miss a call, the scroll key starts blinking to indicate the event. When the display light turns off, the scroll key starts blinking slowly. To set the length of time for blinking for missed events or to select of which events you want to be notified, select Menu > Tools > Settings > General > Personalisation > Notification light. To change the slide settings, select Menu > Tools > Settings > General > Slide handling.
Set up your device Set up your E66 following these instructions. Insert the SIM card and battery 1. With the back of the device facing you, press the release buttons (1) and slide the back cover off (2). 3. Insert the SIM card. Make sure that the contact area on the card is facing the connectors on the device and that the bevelled corner is facing the top of the device. 2. If the battery is inserted, lift the battery in the direction of the arrow to remove it. 4. Insert the battery.
5. Slide the back cover back to place. 3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet. Your battery has been precharged at the factory, but the charging levels may vary. To reach the full operation time, charge the battery until it has been fully charged according to the battery level indicator. Tip: If you have old compatible Nokia chargers, you can use them with the Nokia E66 by attaching the CA-44 charger adapter to the old charger.
Connect the headset Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Connect the compatible headset to the headset connector of your device. 3. Push the card in until it locks into place. 4. Close the back cover. Eject the memory card Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
Get started After you have set up your device, switch it on and start to explore what is new in Eseries. First start-up 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter the code, and select OK. 3. When prompted, enter the country in which you are located and the current date and time. To find your country, enter the first letters of the country name.
You can define two separate home screens for different purposes, such as one screen to show your business email and notifications, and another to show your personal e-mail. This way, you do not have to see business-related messages outside office hours. Menu To rename a new folder, select Options > Rename. To rearrange the folder, scroll to the application you want to move, and select Options > Move. A check mark is placed beside the application. Scroll to a new location, and select OK.
time depends on the amount of data to be transferred. You can also cancel and continue later. The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transfer earlier. The items that you can transfer vary depending on the other device. If an application consists of several tabs (see figure), open a tab by scrolling right or left. Transfer content between devices To save a file, select Options > Save.
To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side of the object. Display indicators The device is being used in a GSM network (network service). The bar next to the icon indicates the signal strength of the network at your current location. The higher the bar, the stronger the signal. The battery charge level. The higher the bar, the stronger the charge in the battery.
The connection to a headset with Bluetooth connectivity has been lost. A hands-free car kit is connected to the device. A loopset is connected to the device. A text phone is connected to the device. Your device is synchronising. Find items When a search field is available in the application, you can use the search field to search for a name, file, or application. 1. To search for an item, enter text in the search field.
Memory card Select Menu > Tools > Memory. If you cannot use a memory card in your device, you may have the wrong type of memory card, the card may not be formatted for your device, or the card has a corrupted file system. Your Nokia device supports the FAT16 and FAT32 file system for memory cards. MicroSDHC This device uses microSD and microSDHC memory cards. To ensure interoperability, use only compatible memory cards with this device.
on the same key as the present one, wait until the cursor appears, and enter the letter. To insert a number, press and hold the number key. To switch between the upper and lower case mode and the number mode, press #. To erase a character, press the backspace key. Press and hold the backspace key to erase more than one character. To access the most common punctuation marks, press the 1 key. Press 1 repeatedly to reach the desired punctuation mark. To add special characters, press *.
Write text Press # repeatedly to switch among different character modes. Input method indicators Pinyin symbols are mapped to number keys. You can press the corresponding number key once regardless of the intended symbol’s position on the key. The device will make logical combinations and display all feasible matches to those Pinyin symbols you just pressed. The input methods provided in the device may vary according to different sales markets. This device supports simplified Chinese input methods.
Press the scroll key to choose the highlighted Pinyin. Thus the selected Pinyin can be displayed in the Pinyin window, and the other Pinyin will disappear, and the candidate list corresponding to this Pinyin can be activated (numbering will be shown on each candidate, and the first candidate is highlighted). 3.
you should first scroll right to highlight this character and then press the scroll key to input it. 5. After you input the character for "pin", the predictive list will be shown, and the character for "yin" is shown in the predictive list. You could use the same method described in item 4 to input this character. Insert special characters and punctuation marks in Chinese input mode 1.
3. When you have finished writing the word and it is correct, scroll right to confirm it, or press 0 to add a space. If the word is not correct, press * repeatedly to view the matching words the dictionary has found. If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, select Spell, enter the word (up to 32 letters) using traditional text input, and select OK. The word is added to the dictionary.
New from Eseries Your new Eseries device contains new versions of the Calendar and Contacts applications, as well as a new home screen. Access tasks quickly Whenever you see the icon on the home screen, or in the Contacts or Calendar applications, scroll right to access a list of available actions. To close the list, scroll left. When you navigate in these applications, to go back to the previous level, scroll left.
to it and press the scroll key. To access other tasks, scroll right. To view your missed calls, scroll to the calls box in the notification area. To return a call, scroll to a call and press the call key. To send a text message to a caller, scroll to a call, scroll right and select Send text msg. from the list of available actions. To listen to your voice mail, scroll to the voice mail box in the notification area. Scroll to the desired voice mailbox and press the call key to call it.
To create a new e-mail message, press the e-mail key for a few seconds. Nokia Calendar for Eseries Select Menu > Office > Calendar. Create and view scheduled events and appointments, and switch between different calendar views. The device functions that display names use the phone number that most closely matches. If less than 7 digits match, the name displayed may not be correct.
• Anniversary entries remind you of birthdays and special dates. They refer to a certain day but not a specific time of the day. Anniversary entries are repeated every year. • To-do entries remind you of a task that has a due date but not a specific time of the day. To create a calendar entry, scroll to a date, select Options > New entry and the entry type. Tip: To create a meeting entry, start entering the subject. Create meeting, memo, anniversary, or to-do entries 1. Enter the subject. 2.
option is displayed only when the Lunar calendar setting item is on. Nokia Contacts for Eseries Select Menu > Communic. > Contacts. Save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact.
To change the contacts directory, scroll to the top of the names list, press the scroll key, and select from the list of available directories. To organise contacts directories, select Options > Organise contact lists and a directory. Scroll up to move it to the desired place. Add ringing tones for contacts key to access the menu, and open the Calendar application. The phone call remains active in the background.
Personalisation You can personalise your device by adjusting the various tones, background images, and screen savers, for example. Profiles To delete a profile that you created, select Options > Delete profile. You cannot delete the predefined profiles. Select Menu > Tools > Profiles. You can adjust and customise the ringing tones, alert tones, and other device tones for different events, environments, or caller groups. The profile currently in use is shown at the top of the display on the home screen.
Personalise the home screen Select Menu > Tools > Modes. To change the background image of the home screen, select the Wallpaper folder. To select an animation for the screen saver, select the Power saver folder. To change the name of the current home screen, select Mode name. To select which applications and notifications you want to see on the home screen, select Home screen applications. To change the theme of the home screen currently in use, select Theme.
Media Your device contains a variety of media applications for both business and leisure time use. For more information, see the extended user guide on the web. Camera Select the scene. Select the flash mode (images only). Activate the self-timer (images only). Select Menu > Media > Camera. Capture an image Your device supports an image capture resolution of up to 2048 x 1536 pixels. The image resolution in this guide may appear different.
4. To stop recording, select Stop. The video clip is automatically saved in Gallery. The maximum length of the video clip depends on the available memory. Music player Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Music player. Music player supports files formats such as AAC, AAC+, eAAC+, MP3, and WMA.
Nokia Music Store Select Menu > Media > Music store. In the Nokia Music Store (network service) you can search, browse, and purchase music to download to your device. To purchase music, you need to register for the service. To check the Nokia Music Store availability in your country, visit www.nokia.com/music. To find more music in the different categories, select Options > Find in Music store. To select the access point to use with the Music Store, select Default acc. pt..
To open the next or previous image for viewing, scroll right or left. To enlarge the image on the display, select Options > Zoom in. To reduce the image on the display, select Zoom out. To view the image in full screen size, select Options > Full screen. To return to normal view, select Options > Normal screen. To rotate the image, select Options > Rotate. Select Right to rotate the image clockwise by 90 degrees, or select Left to rotate the image counterclockwise by 90 degrees.
Internet 40 With your new Eseries device you can browse both the internet and your company's intranet, and download and install new applications to your device. You can also use your device as a modem and connect your PC to the internet. If the web page is unreadable or not supported and garbage code is found while browsing, you can try to select Menu > Web > Options > Settings > Page > Default encoding , and select a corresponding encoding. Web Connection security Select Menu > Web.
that you trust and that offer adequate security and protection against harmful software. Tip: When you start to enter the address, the addresses of the pages you have previously visited that match your input are displayed. To open a page, scroll to its address, and press the scroll key. To move on a web page, use the scroll key, which is shown as a pointer on the page. When you move the pointer over a link, the pointer changes into a hand. Press the scroll key to open the link.
Browse the intranet Select Menu > Office > Intranet. To browse your company's intranet, you must create a company-specific VPN policy. Select Menu > Tools > Settings > Connection > VPN. To connect to the intranet, open the Intranet application, select the connection method and Options > Connect. To define which VPN profile to use in the connection, select Options > Use other VPN policy. To define the settings for the intranet connection, select Options > Settings. Download! 42 Select Menu > Download!.
Set up an internet access point for packet data (GPRS) 1. Select Menu > Tools > Settings > Connection > Access points. 2. Select Options > New access point to create a new access point, or select an existing access point from the list and then Options > Duplicate access point to use the access point as a basis for the new one. 3. Define the following settings. • Connection name — Enter a descriptive name for the connection. • Data bearer — Select Packet data.
Messaging 44 Select Menu > Communic. > Messaging. In Messaging (network service), you can send and receive text messages, multimedia messages, audio messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in the service area of a cellular network.
Settings > Text message or Multimedia message > Receive report. The reports are saved in the Reports folder. E-mail messages Select Menu > Messaging > Mailbox. To receive and send e-mail, you must have a remote mailbox service. This service may be offered by an internet service provider, a network service provider, or your company. Your device is compliant with internet standards SMTP, IMAP4 (revision 1), and POP3, and with different vendor-specific e-mail solutions.
nor retrieved, Selected to retrieve only messages you select from the remote mailbox, or All to retrieve all messages not previously retrieved. 4. To manage your e-mail offline to save in connection costs and work in conditions that do not allow a data connection, select Options > Disconnect to disconnect from the remote mailbox. Any changes you make in the remote mailbox folders while offline, take effect in your remote mailbox the next time you go online and synchronise.
Delete messages To free up memory space on your device, regularly delete messages from the Inbox and Sent folders, and delete retrieved e-mail messages. To delete e-mail from the device only, and keep the original on the server, select Options > Delete > Phone (header remains). To delete e-mail both from the device and the remote server, select Options > Delete > Phone and server. To cancel the deleting, select Options > Restore.
on your device, you must define the multimedia message settings. Your device may have recognised the SIM card provider and automatically configured the multimedia message settings. If not, use Settings wizard, or contact your service provider for the correct settings. Create and send multimedia messages 48 Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. 1.
Messaging settings Select Menu > Communic. > Messaging > Options > Settings. Fill in all fields marked with Must be defined or with a red asterisk. Your device may recognise the SIM card provider and configure the correct text message, multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, order the settings from your service provider in a configuration message, or use the Settings wizard application.
• Access point in use — Select the default access point to connect to the multimedia message centre. You may not be able to change the default access point if it is preset in your device by your service provider. • Multimedia retrieval — Select Always automatic to receive multimedia messages always automatically, Auto in home netw.
• • • • Always ask if you want to confirm from where the e-mail should be deleted every time you delete an e-mail. Send message — Select to send the e-mail immediately or when a connection is available. Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address in the Outgoing e-mail settings. Include signature — Select whether you want to attach a signature to your e-mail messages.
• Folder view — Define how you want the messages in Inbox to be shown.
Phone To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in the service area of a cellular network. Voice calls Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Answer a call To answer a call, press the call key. To reject a call, press the end key.
call. Scroll to the desired number or name, and press the call key. To adjust the volume of an active call, use the volume keys. Make a conference call 1. To make a conference call, enter a participant's phone number, and press the call key. 2. When the participant answers, select Options > New call. 3. When you have made a phone call to all the participants, select Options > Conference to merge the calls into a conference call.
To hear the entries in your contacts list, select Contacts. Do not use this option if you have more than 500 contacts. To hear information on your missed and received calls, dialled numbers, and frequent calls, select Recent calls. To listen to your voice messages, select Voice mailbox. To dial a telephone number, select Dialler. To use voice commands to make a phone call, select Voice commands. To have your received messages read aloud, select Message reader. To hear the current time, select Clock.
Push to talk Select Menu > Communic. > PTT. Push to talk (PTT) (network service) provides direct voice communication connected with the push of a key. With PTT, you can use your device as a walkie-talkie: one person talks while the others listen through the built-in loudspeaker. Users take turns responding to each other. Because only one user can talk at a time, the maximum duration of a speech turn is limited. For details of the speech turn duration, contact your service provider.
To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log.
Travelling Need directions? Looking for a restaurant? Your Eseries device has the tools to get you where you want to be. About GPS and satellite signals 58 The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. Your device has an internal GPS receiver. A GPS terminal receives low-power radio signals from the satellites and measures the travel time of the signals.
• If the weather conditions are bad, the signal strength may be affected. • Establishing a GPS connection may take from a couple of seconds to tens of minutes. Satellite status To check how many satellites your device has found, and whether your device is receiving satellite signals, select Menu > GPS > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal.
About Maps To connect to the internet automatically when you start Maps, select Options > Tools > Settings > Internet > Go online at start-up > Yes. To prevent automatic downloading of maps, select Options > Tools > Settings > Internet > Go online at start-up > Never. To set the device to ask your permission before connecting to the internet, select Options > Tools > Settings > Internet > Go online at start-up > Always ask.
Initially, your device must receive signals from at least four satellites to calculate the coordinates of your location. After the initial calculation, signals from three satellites may be enough. The data transfer indicator shows the internet connection used and the amount of data transferred since the application started. Find locations To find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and press the scroll key.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals. Use GPS data To check the signal strength of the satellites that provide the positioning information necessary for navigation, open any of the three views and select Options > Satellite status. To set a landmark or location as the destination of your trip, select Navigation > Options > Set destination.
Nokia Office Tools Nokia Office Tools support mobile business and enable effective communication with work teams. Active notes Select Menu > Office > Active notes. Active notes allows you to create, edit, and view different kinds of notes, for example, meeting memos, hobby notes, or shopping lists. You can insert images, videos, and sound in the notes. You can link notes to other applications, such as Contacts, and send notes to others. To create a note, start writing.
To retrieve the results of a calculation from the memory and use them in a calculation, select Options > Memory > Recall. File manager Select Menu > Office > File mgr.. With File manager, you can manage the contents and properties of files and folders on your device memory and memory card. You can open, create, move, copy, rename, send, and search for files and folders. Copyright protection may prevent sending some files. Open the device tab or the memory card tab.
Convert measurements 1. Scroll to the Type field, and select Options > Conversion type to open a list of measures. Select the measure to use, and select OK. 2. Scroll to the first Unit field, and select Options > Select unit. Select the unit from which to convert, and select OK. Scroll to the next Unit field, and select the unit to which to convert. 3. Scroll to the first Amount field, and enter the value to convert. The other Amount field changes automatically to show the converted value.
To configure a printer for your device, select Menu > Office > Printers > Options > Add. To set the printer as the default printer, select Options > Printing options > Printers, scroll to the printer and select Options > Set as default. Before you print, make sure your device is properly connected to the printer. To print a document, select Options > Printing options > Print. To print to a file, select Options > Printing options > Print > Print to file, and determine the location for the file.
Notes Select Menu > Office > Notes. You can create and send notes to other compatible devices, and save received plain text files (.txt format) to Notes. To write a note, start entering the text. The note editor opens automatically. To open a note, scroll to it, and press the scroll key. To send a note to other compatible devices, select Options > Send. To synchronise or to define synchronisation settings for a note, select Options > Synchronisation.
• First press the backspace key to empty the contents in the input window, and then enter the Chinese characters or English words you want to look up. • Press Back. The dictionary will return to the state of showing candidates entry list, but the entry in the inputting window is still highlighted. You could directly input text or move the cursor by scrolling left or right to edit the text in the input window.
Connectivity Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer. Connectivity security At Nokia, we understand how important it is that your mobile phone or device operates reliably and that your personal content is saved safely. Any information from an unknown or unreliable source, via Bluetooth connectivity, multimedia message, infrared, or cable, may harm your PC, mobile phone, or device.
To synchronise the music in your device with Nokia Music Player, install the Nokia Music Player software on your PC, connect the data cable, and select Media transfer. Several Bluetooth connections can be active at a time. For example, if your device is connected to a headset, you can also transfer files to another compatible device at the same time. Features using Bluetooth technology increase the demand on battery power and reduce the battery life.
6. Select the device with which you want to connect. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode. When the connection has been established, Sending data is shown. The Sent folder in the Messaging application does not store messages sent using Bluetooth connectivity.
between your device and the other device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible headset or computer, or devices that belong to someone you trust. If you want to accept connection requests from the other device separately every time, select Set as unauthorised. To use a Bluetooth audio enhancement such as a Bluetooth handsfree or headset, you need to pair your device with the enhancement.
View and end active connections To view detailed information about network connections, select a connection from the list and Options > Details. The type of information shown depends on the connection type. To end the selected network connection, select Options > Disconnect. To end all active network connections simultaneously, select Options > Disconnect all.
Security and data management Manage the data and software on your device, and take care of the security of the device and its contents. Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning. Lock the device Important: If the device has been locked, enter the lock code to activate the phone function.
To remove the memory card password, select Options > Remove password. When you remove the password, the data on the memory card is not protected against unauthorised use. To open a locked memory card, select Options > Unlock memory card. Enter the password. If you cannot recall the password to unlock a locked memory card, you may reformat the card, in which case the card is unlocked and password removed. Formatting a memory card destroys all data stored on the card.
cards support the fixed dialling service. Contact your service provider for more information. When fixed dialling is activated, calls may be possible to the official emergency number programmed into your device. 1. To restrict calls from your device, select Options > New SIM contact and enter the contact name and phone number to the list of numbers to which calls are allowed, or select Add from Contacts to copy the contact from Contacts.
• Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Certificate trust settings Trusting a certificate means that you authorise it to verify web pages, e-mail servers, software packages, and other data. Only trusted certificates can be used to verify services and software.
• Java ME™ applications compatible with the Symbian operating system. The Java application installation file extensions are .jad or .jar. Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or with Bluetooth. During the installation, the device checks the integrity of the package to be installed.
SyncML technology for remote synchronisation. For information on SyncML compatibility, contact the supplier of the applications with which you want to synchronise your device. You may receive the synchronisation settings as a message from your service provider. The available applications you can synchronise may vary. Contact your service provider for more information. Create a synchronisation profile There is a Nokia PC Suite synchronisation profile available in your device.
policies with regular internet access points to create secure connections. Your service provider may preset some or all access points for your device, and you may not be able to create, edit, or remove them. Contact your company's IT department for the correct settings. Open a destination, select a VPN access point, select Edit, and define the following: • Connection name — Enter a name for the VPN access point. • VPN policy — Select the VPN policy to combine with the internet access point.
To save scanned data to Contacts, select Options > Add to Contacts or Save business card, depending on the data you are saving. If the data you scanned includes a mobile phone number or an e-mail address, you can call or send a message to the number or send an e-mail to the address by selecting Options > Call or Options > Create message:. If the data you scanned includes a URL link, you can open it by selecting Options > Open link.
Settings Select Menu > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a special message by your service provider. You may not be able to change such settings. Select the setting you want to edit to do the following: • Switch between two values, such as on or off. • Select a value from a list.
To change the home screen mode settings, select Home screen > Mode settings. To assign shortcuts for the device keys, select Home screen > Key shortcuts. These shortcuts are not available in the home screen. To select whether to show or hide the operator logo, select Home screen > Operator logo > On or Off. To select the mailbox that is shown in the home screen, select Home screen > Home screen mailbox. Tone settings To select a ringing tone for voice calls, select Tones > Ringing tone.
Date and time settings Select Menu > Tools > Settings > General > Date and time. To set the current date and time, select Date and Time. To define your time zone, select Time zone. To update the time, date, and time zone information automatically (network service), select Network operator time > Auto-update. To select whether to use the 12-hour or 24-hour clock system and with which symbol to separate hours and minutes, select Time format and Time separator.
Avoid using codes that are similar to emergency numbers to prevent accidental dialling of the emergency number. Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice. Restore original settings To change the PIN code, select Phone and SIM card > PIN code. The new code must be 4 to 8 digits long. The PIN code protects your SIM card against unauthorised use and is provided with the SIM card.
Network settings Select Menu > Tools > Settings > Phone > Network. To select the operator, select Operator selection and Manual to choose from available networks, or Automatic to have the device select the network automatically. To set the device to indicate when it is used in Micro Cellular Network (MCN), select Cell info display > On. Connection settings Select Menu > Tools > Settings > Connection. Access points Select Menu > Tools > Settings > Connection > Access points.
Session initiation protocols (SIP) are used for creating, modifying, and terminating certain types of communication sessions with one or more participants (network service). SIP profiles include settings for these sessions. The SIP profile used by default for a communication session is underlined. To create a SIP profile, select Options > New SIP profile > Use default profile or Use existing profile.
Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. General shortcuts General shortcuts Power key Press and hold to switch your device on and off. Press once to switch between profiles. Home screen 88 Left selection key + * Lock and unlock the keypad. Call key Open the call log. 0 Press and hold to open your home page in the Web browser. # Press and hold to switch between the Silent and General profiles.
Nokia original enhancements Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. An extensive range of enhancements is available for your device. Please visit www.nokia.com.cn for more details.
Battery and charger information Battery and charger information 90 Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4F. This device is intended for use when supplied with power from the following chargers: AC-8. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Please recycle when possible. Do not dispose as household waste. Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids.
The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Phone x O O O O O Battery x O O O O O Accessories x O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 cm (7/8 inches) away from the body.
• Not carry the wireless device in a breast pocket. • Hold the wireless device to the ear opposite the medical device to minimise the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.
standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1.20 W/kg .
MANUFACTURER’S LIMITED WARRANTY This Limited Warranty is in addition to, and does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products. Nokia Corporation (“Nokia”) provides this Limited Warranty to person who has purchased the Nokia product(s) included in the sales package (“Product”).
How to get warranty service If you wish to make a claim under the Limited Warranty, you may call the Nokia call center (where this is available and please note national rates apply to calls) and/or where necessary, return your Product or the affected part (if it is not the entire Product) to a Nokia care centre or Nokia designated service location. Information about Nokia care centres, Nokia designated service locations and Nokia call centres can be found at local Nokia web pages where available.
cells are broken or show evidence of tampering or by the fact that the battery has been used in equipment other than those for which it has been specified. 5.
Limitation of Nokia's liability This Limited Warranty is your sole and exclusive remedy against Nokia and Nokia's sole and exclusive liability in respect of defects in your Product. However, this Limited Warranty shall neither exclude nor limit i) any of your legal (statutory) rights under the applicable national laws or ii) any of your rights against the seller of the Product.
How to obtain an English E66 User Guide Nokia understands from consumer feedback in PRC that there is only limited usage of the English User Guide. In consideration of this and to help conserve natural resources, Nokia has selected to not to include the English User Guide in the E66 Sales Package. To obtain a E66 User Guide in English, please kindly download it from: www.nokia.com.
Index A access points creating 86 VPN 79 Active notes 63 alarm clock 66 alert tones 83 altitude calibration 62 animated screen saver 35 antennas 15 application settings 87 applications common actions 19 installing 78 attachments e-mail 46 autolock period 85 B 104 background image 35 backing up data 77 barcodes 80 battery charge level 20 charging 14 inserting 13 Bluetooth authorising devices 71 pairing 71 passcode 71 receiving data 70 security 72 sending data 70 bookmarks 41 browsing intranet 42 offline
connectors 10 contact groups adding ringing tones 33 creating 32 making conference calls 32 contacts adding 32 adding ringing tones 33 searching 32 contacts directories managing 32 contacts key 29 converting currencies 65 measurements 65 currency conversions 65 D date settings 84 decrypting device memory and memory card 75 destination removing 62 setting 62 display changing the look 35 indicators 20 settings 82 display rotation 11 settings 82 Download! managing items 42 E e-mail automatic retrieval sett
J jad files 78 jar files 78 Java applications K M 78 keyguard 12 keypad lock settings 85 locking 12 tones 83 keys 10 shortcuts 82 L 106 landmarks creating 62 language changing 23, 27 settings 83 lock code 74, 85 locking device 74 device autolock 85 keypad 12, 85 Log 56 adding numbers to Contacts 56 deleting 56 logos operator logo 82 welcome logo 82 Lunar calendar 31 mailboxes connecting 45 making a call 53 Maps 59, 60 browsing 60 finding locations 61 indicators 60 routes 61 measurements converting 6
passwords memory card password 22, 64 PDF reader 65 personalisation 35 changing language 83 display 82 home screen 82 tones 83 PIN code changing 85 positioning settings 59 predictive text input 23, 26, 83 printing 65 profiles creating 34 customising 34 selecting ringing tones 34 PTT 56 push to talk 56 Q Quickoffice R 64 remote lock 74 remote synchronisation 79 restoring original settings 85 ringing tones 83 contacts and contact groups 33 in profiles 34 S vibrating alert 83 satellite signal strength
speed dialling 54 standby mode settings 82 switching device on and off 17 Symbian applications 78 synchronisation synchronisation profiles 79 T 108 tabs 19 text changing size 82 letter mode 22, 26 number mode 22, 26 predictive input 23, 26 traditional input 22, 26 text entry 24 text messages sending 47 settings 49 writing 47 themes changing 35 time settings 84 tones 83 settings 83 toolbar camera 36 traditional text input 22, 26 transferring data 19 trip destination 62 trip meter 62 U USB data cable 69
