User Manual

an unsuccessful call attempt. To stop automatic
redialling, press the end key.
• Show call duration — Display the length of a call
during the call.
• Summary after call — Display the length of a call
after the call.
• Speed dial — Activate speed dialling.
• Anykey answer — Activate anykey answer.
• Line in use — This setting (network service) is
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected,
is displayed in the home
screen.
• Line change — Prevent line selection (network
service), if supported by your SIM card. To change
this setting, you need the PIN2 code.
Network settings
Select Menu > #Control panel > Settings and
Phone > Network.
To select the network mode, select Network mode
and Dual mode, UMTS, or GSM. In dual mode, the
device switches automatically between networks.
Tip: Selecting UMTS enables faster data
transfer, but may increase the demand on
battery power and reduce the battery life. In
regions close to both GSM and UMTS networks,
selecting Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select Operator selection and
Manual to select from available networks, or
Automatic to set the device to select the network
automatically.
To set the device to indicate when it is used in a
microcellular network (MCN), select Cell info
display > On.
Connection settings
Select Menu > #Control panel > Settings and
Connection.
Select from the following:
• Bluetooth — Edit the Bluetooth settings.
• USB — Edit the data cable settings.
• Destinations — Set up new or edit existing access
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
• VPN — Manage the settings for virtual private
networking.
• Packet data — Define when packet data network
is attached, and enter the default packet switched
access point name if you use your device as a
modem for a computer.
• Wireless LAN — Set the device to display an
indicator when a wireless LAN (WLAN) is available,
and define how often the device searches for
networks.
151