User's Guide

Settings
65
To call the allowed phone number, ensure that your phone is in the standby
mode. Scroll down to highlight the number you want to call, or enter it on the
keypad; and then press the call key to place the call.
Change lock code
The preset lock code, by default, is the last four digits of your phone number.
Depending on your wireless service provider, the preset lock code can be a four
digit number such as 1234 or 0000. If none of these work, contact your wireless
service provider for help.
To ensure the security of your device, you may want to change the preset lock
code to your own selected four digit number. Avoid using codes similar to
emergency numbers such as 911 to prevent accidental dialing of the emergency
number.
If you enter an incorrect lock code five times in a row, your device may ask you
for the security code. By default, the security code is 12345, a five-digit number.
Note: With the wrong lock code entered five times in succession, your
phone will not accept your correct lock code for 5 minutes, even if you
power off the device between incorrect entries.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Change lock code.
4. Enter the new lock code (must be 4 characters in length).
5. Reenter the new lock code for verification, and select OK.
When changing your lock code, make sure you store it in a safe place, away from
your device.
Call restrictions
Select call restrictions to block or allow numbers for incoming and outgoing calls.
All calls from numbers entered as blocked numbers are ignored and sent to voice
mail.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Change lock code," p. 65.
3. Select Call restrictions and the types of calls you want to restrict:
Restrict outgoing calls—Set restrictions on making calls.