User's Guide

Settings

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device

function.

1. In the standby mode, select Menu > Settings > Voice commands.

2. Select the device function you want to tag: Profiles, Voice mailbox, Radio,

Voice recorder or Call log.

3. If necessary, select an option associated with that function and Add.

4. Select Start, and speak the voice tag clearly into the microphone. Do not

select Quit unless you want to cancel the recording.

The device replays and saves the recorded tag. appears next to commands

with voice tags assigned.

Activate a voice command

To issue a command after you have associated a voice tag with a function in your

device, speak the voice tag.

1. In the standby mode, press and hold the right selection key or voice key.

2. With Speak now displayed, pronounce the voice tag clearly into the

microphone.

With the voice tag found, the device displays Found:, and plays the recognized

voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can select one of the

following options:

Playback—Listen to the voice command tag.

Change—Change the voice command.

Delete—Erase the voice command tag.

■ Phone details

From the standby mode, select Menu > Settings > Phone details to view the user,

version, system and icon details of your phone.