Nokia RM-377 User Guide
© 2008 Nokia. All rights reserved. Nokia, Navi and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
liabilities, such limitations shall likewise limit any representations, warranties, damages and lialibities of Nokia’s licensors. The availability of particular products and applications for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options. Export controls This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
Contents SAFETY...................................................................................... 6 General information .............................................................. 10 Access codes........................................................................................................... 10 Nokia support on the web .................................................................................. 10 1. Get started........................................................................
Contacts................................................................................................................... Log............................................................................................................................. Settings.................................................................................................................... Gallery ...................................................................................................................... Media..
SAFETY Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your device is not water-resistant. Keep it dry. ■ About your device The wireless device described in this guide is approved for use on the CDMA 800 MHz network. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights.
Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Remember to make back-up copies or keep a written record of all important information stored in your device. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as sending e-mail, browsing websites, or downloading files require network support for these technologies.
General information ■ Access codes When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. Making an emergency call in the offline profile or when the device is locked requires that the device recognise the number to be an official emergency number. It is advisable to change the profile or unlock the device by entering the lock code before you make the emergency call. To activate the device when it is locked, enter the lock code.
1. Get started ■ Install and remove battery Note: Always switch the device off and disconnect the charger before removing the battery. 1. To remove the cover, with the back of the device facing you, press the release button, and lift up the back cover. el gapix 1.3 me 2. To insert the battery, position the battery so the gold-coloured contacts match up with those on the device, and insert the battery into the battery slot.
3. Push down on the other end of the battery to snap the battery into place. 4. Insert the back cover toward the top of the device, and press it down until you hear a click. 5. To remove the battery, remove the cover (see step 1), and insert your finger into the finger grip, to lift the battery from its compartment. 12 ixel 1.
■ Insert UIM card Always switch the device off and disconnect the charger before inserting or removing the UIM card. 1. Remove the cover and battery. See steps 1 and 5 in "Install and remove battery", p. 11. 2. Ensure that the goldcoloured area on the UIM card is facing downwards, and insert the UIM card into the card slot. 3. Install the battery, and replace the cover. See step 4 in "Install and remove battery", p. 11.
■ Charge the battery Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall socket. 2. Connect the charger plug to the USB connector at the left side of the device.
■ Switch your device on or off Press and hold the power key on the keypad for at least three seconds. Warning: Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ■ Normal operating position 1.3 pixel mega Your device has an internal antenna. Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
Note: As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
2. Your device ■ Keys and parts 1 12 11 10 2 9 8 3 4 7 5 6 13 1.3 megapixel 1. Earpiece 2. Volume key 3. Right selection key 4. Power/End key 5. Camera key 6. Microphone 7. Keypad 8. Call key 9. Left selection key 10.Navi™; hereafter referred to as scroll key 11.Charge / USB port 12.Headset connector 13.Camera lens 14.Speaker 15.
■ Standby mode and shortcuts Depending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear in the standby mode. 1. Signal strength — Shows the signal strength of the wireless network at your current location. 2. Battery level — Shows the battery charge level. 3. Go to — Press the left selection key to access a certain feature quickly. 1 3 5 2 Go to Menu Names 4. Names — Press the right selection key to access the contacts list.
Shortcuts in the standby mode: — To access the list of dialled numbers, press the call key once. — To access the main menu, press the middle selection key. — To switch between current profile and silent profile, press and hold # for at least three seconds. — To activate the radio function, press and hold * for at least three seconds. — For shortcuts of scroll key, see "My shortcuts", p. 40. ■ Keyguard Keyguard locks the keypad to prevent accidental key presses.
To lock the keypad, select Menu, and press * within 2 seconds. To unlock the keypad, select Menu, and press * within 2 seconds. If you receive a call when the keypad is locked, it is automatically unlocked, and then locked again when you end the call.
3. Call functions ■ Make and answer a call To make a call, enter the phone number, including the country code and area code, if necessary, and press the call key. Press the volume key to adjust the volume of the earpiece or headset during the call. To answer a call, press the call key. To end a call or to reject an incoming call, press the end key. ■ Conference calling Conference calling (network service) allows you to take part in a conference call with another two participants.
■ Loudspeaker Warning: Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud. To activate the loudspeaker during a call, select Loudsp. To deactivate the loudspeaker, select Handset. The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected. ■ Voice dialing You can make a phone call by saying the name that is saved in the contact list of the device.
• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. • Very short names are not accepted. Use long names, and avoid similar names for different numbers. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. To record a voice tag, select Menu > Contacts > Names > Details > Options > Add voice tag. Select Start, and speak after the tone.
4. Write text You can enter text using traditional or predictive text input. To change the text input method, and to switch between upper and lower case, press #. To display a list of special characters, press *. ■ Traditional text input Press a number key, 2-9, repeatedly until the desired character appears. To add a space, press 0. To add a number, press and hold the desired number key. ■ Predictive text input Predictive text input is based on a built-in dictionary when writing in English.
If ? is displayed after the word, the word is not in the dictionary. To add the word to the dictionary, select Spell, enter the word using traditional text input, and select Save.
5. Menu functions The device functions are grouped into menus. Not all menu functions or option items are described here. In the standby mode, select Menu, scroll to the menu item you want to open, and select it. To exit the current menu level, select Exit or Back. To return to the standby mode, press the end key. ■ Messaging You can only use messaging services supported by your network or service provider. Text message settings Select Menu > Messaging > Text messages > Message settings.
Delivery reports— to receive confirmation when your message is delivered Send callback number — to send a number to which you want to be called back Signature — to attach a signature to outgoing messages.
Multimedia messages settings Select Menu > Messaging > Multimedia messages > Message settings and from the following: Save sent messages — Select whether the multimedia messages you send are saved to the Sent items folder. Delivery reports — Select whether to receive message delivery reports. Default slide timing — Set the default time for slides in multimedia messages. Allow multimedia reception — Select whether to receive multimedia messages.
Write and send a text message 1. Select Menu > Messaging > Text message > Create message. 2. To send the message to one recipient, select Add > Contacts, the recipient, and Select. 3. To send the message to many recipients, select Add > Contact groups, the group, and Select. Write and send a multimedia message To check availability and to subscribe to the multimedia messaging service (network service), contact your service provider.
To send a multimedia message, do the following: 1. Select Menu > Messaging > Multimedia messages > Create message. 2. Select Insert, a multimedia folder and the file you want to send. 3. Press scroll key to select the second or third files. 4. Select Send to insert the files into the message. 5. Enter the phone number or e-mail address for your recipient, or select Add to retrieve a number or address from the contacts list. 6. Enter a subject for the message and select Send.
3. Enter your reply, and select Send. Inbox, Sent items, and Drafts folders All incoming text and multimedia messages are saved in the Inbox folder. Outbox contains unsent and failed messages. If you have set the device to save the sent messages, they are saved in the Sent items folder. To save the message you are writing to the Drafts folder to edit and send later, select Options > Save as draft (text message) or Save message (multimedia message).
To delete all text messages in a folder, select Menu > Messaging > Text messages > Delete messages > All, All read, All unread and the folder. To delete all multimedia messages in a folder, select Menu > Messaging > Multimedia messages > Delete messages and the folder. Voice messages To activate voice mail (network service), contact your service provider. When you subscribe to the service, you receive voice mailbox number. Save the number to your device. For more information, contact your service provider.
Minibrowser (network service) allows you to check your email messages with your device. Select Menu > Messaging > Minibrowser messages. Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC. ■ Contacts To search for a contact, select Menu > Contacts > Names > Options > Find, and enter the first character of the contact name. Matching contacts are displayed. To change the text input method, select #.
To copy or move contacts from your device to the UIM card, or from the UIM card to your device, select Menu > Contacts > Move contacts or Copy contacts. To empty your contacts list, select Menu > Contacts > Delete all contacts. Groups Groups allow you to send messages to a designated group of people. To add a new group, select Menu > Contacts > Groups > Add, the detail for the group, and Save. Voice tag You can record voice tags for contacts to call them using voice dialling. See "Voice dialing", p. 22.
select Menu > Contacts > 1-touch dialng > a number key from 2-9, and Assign. Enter the phone number you want to assign to the key, or select Search to retrieve the number from your contacts. ■ Log To view your most recent missed or received calls or dialled numbers, select Menu > Log > Missed calls, Received calls, or Dialed numbers. You can view the date and time of the call, edit, view, or call the registered phone number, send a text message to it, or save it to your contacts.
To view the duration or amount of data sent or received during data and fax calls (network service) or using the minibrowser (network service), select Menu > Log > Data/ fax calls or Minibrowser calls. ■ Settings From this menu, you can adjust various device settings. Profiles Profiles define how your device reacts when you receive a call or message, and how your keypad sounds when you press a key. You can personalise ringing options, keypad tones, and other settings for each of the available profiles.
Themes A theme contains various elements for personalising your device. To change the theme for your device, select Menu > Settings > Themes, select a theme, and Apply. Tones Tone settings only apply to the currently selected profile.
Keypad tones — to select the volume level of the keypad tones End of list tone — to set a tone to sound when you are at the end of a menu list, contacts list, or calls list Other tones — to select a tone for other functions Application tones — to set the application default tone Alert for — to set the device to alert for all calls or only when a member of a selected caller group calls Display Select Menu > Settings > Display and from the following options: Wallpaper — to set a background image that is disp
Sleep mode — to turns the phone display off during inactivity Font size — to select the font size for display text Active standby — to switch the active standby mode on or off and to organise and personalise the active standby mode Navigation key icons — to display the icons of the current scroll key shortcuts in the standby mode when the active standby mode is off Date and time Select Menu > Settings > Date and time and from the following: Date and time settings — to set the date and time, change the time
My shortcuts To quickly access your most frequently used functions, add them to the My shortcuts menu. Select Menu > Settings > My shortcuts, the key on which you want to assign the shortcut to, and Select. Connectivity You can transfer data between your device and a compatible PC using a CA-101 USB data cable. Important: To make a phone call, disconnect the USB data cable.
Call Select Menu > Settings > Call and from the following options: Anykey answer — to answer an incoming call by pressing any key except the call key or the left selection key Automatic redial — to automatically redial a number after an unsuccessful call attempt 1-touch dialing — to select whether the number keys (2-9) can be used for calling a number by pressing and holding the key Calling card — to save up to four calling card numbers in your device to use for long distance calls Abbreviated dialing — to
Call summary — to display the call duration when you end a call Show call time on display — to select whether the duration of the current call is displayed Ringing tone for no caller ID — to set whether a tone sounds for calls where there is no caller ID Device Select Menu > Settings > Phone and from the following options: Language settings — to select the language for the display text Memory status — to view the free memory and used memory of your device Automatic keyguard — to set the keypad to lock auto
Welcome note — to write a welcome note that briefly appears when you switch your device on Confirm UIM service actions — to ask for confirmation for UIM service actions Help text activation — to display brief descriptions for most menu items Flight query — to be asked if the Flight mode should be used each time the device is switched on Backlight time-out — to define how long the backlight remains on Voice commands You can set up to five voice commands, which allow hands-free operation of certain device fe
To activate a voice command, press and hold the right selection key in the standby mode. When Speak now is displayed, say the voice tag clearly into the microphone. If a match is found, the function is activated. If a match is not found, the message No match found is displayed. Enhancements To connect a compatible enhancement to your device, select Menu > Settings > Enhancements . To select the profile automatically activated when your phone is connected to the charger, select Charger > Default profile.
Network The Network menu allows you to customise how your device chooses which network to operate in while you are within or away from your primary or home system. Your device is set to search for the most effective network. To set which network to use when the device cannot find a preferred network, select Menu > Settings > Network > Set mode, and select a mode. Network services To view the network services available on your device, select Menu > Settings > Network services and from the available options.
Restore settings You can restore the original factory settings to your device without affecting personal data such as contacts, language selection, or calendar notes. To reset some of the menu setting to their original signal: 1. Select Menu > Settings > Restore settings > Restore settings only. 2. Enter your lock code, and select OK. ■ Gallery You can save images, videos clips, music files, tones, and recordings to a folder in Gallery.
Images To view and manage images captured with your device camera, select Menu > Gallery > Images > Open. To delete or send an image, select the image, Options, and from the available options. Video clips Video clips recorded with the camera are stored in the Video clips folder. To view and manage video clips, select Menu > Gallery > Video clips > Open. To set a video clips as screen saver or call video, select the video clip, Options, Use video clips. Themes Themes help you to personalise your device.
Tones You can personalise your device with ringing tones and alert tones. To display a list of available tones, select Menu > Gallery > Tones. To listen to a tone, select the tone and Open. To select the tone for incoming calls and alert, select the tone, Options and Use tone. Received files Files sent to your device are saved in this folder. To display a list of received files, select Menu > Gallery > Receiv. files > Open.
■ Media Media offers the camera, video, media player, radio, and voice recorder functions. Camera You can take photos with the built-in camera. The camera produces images in JPEG format. The camera lens is on the back of the device. Your device supports image capture resolutions of up to 1024x1280 pixels. You can send images in a multimedia message. You can also attach an image to a contact to be displayed when the contact calls you.
Camera options In the standby mode, select Menu > Media > Camera > Options and from the following: Video — Switch to the still image or video mode. Landscape mode or Portrait mode — Switch the capture mode to landscape or portrait. Night mode on or Night mode off — Switch the camera night mode on or off. Self-timer — Use the self-timer to include yourself in the picture. Select the time for the camera to wait before capturing the image after you press the camera key. Img. sequence on and Img.
Record a video clip In the standby mode, select Menu > Media > Video. To record a video clip, press the camera key, or select Record. To adjust the camera zoom level, press the scroll key or volume key up and down. The video clip is saved in the Recordings folder in Gallery. To record another video clip, select Back. To send the video clip in a message, select Options > Send. To view more options, select Options.
To open a file, select Menu > Media > Media player > Open gallery, the file, and Open. Radio The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement must be attached to the device for the FM radio to function properly. Warning: Listen to music at an moderate level. Continuous exposure to high volume may damage your hearing. To listen to the radio, select Menu > Media > Radio. To tune to a channel, scroll left or right.
Voice recorder Record speech or sound with your device and listen to them later. You can record up to 180 seconds of sound, depending on the available memory. To start recording, select Menu > Media > Voice recorder, and the record button . To stop recording, select the stop button . The recording is saved to the Recordings list in the Recordings folder in Gallery. After you save a recording, select Options > Play last recorded, Send last recorded, Recordings list, or Select memory.
To set the phone to alert on selected days of week, select Repeat and Repeat days. To set the alarm tone, select Alarm tone. When the alarm sounds, select Stop to shut the alarm off, or Snooze to postpone it. To turn off an active alarm, select Menu > Organiser > Alarm > Off. Calendar The calendar keeps track of reminders, calls you need to make, meetings, memos, to-do list, and birthdays. You can also set an alarm to remind you of these events.
note . Enter the subject, priority, due date, due time, and alarm type, and select Save. Notes You can save short notes in your device. To add a note, select Menu > Organiser > Notes > Add note. Enter the note, and select Save. Calculator You can use the calculator to add, subtract, multiply, divide, calculate the square and the square root, and convert currency values, also using the negative values. Note: This calculator has limited accuracy and is designed for simple calculations. 1.
3. Enter the second number in your calculation. To display the result, select Equals. To perform a square or square root calculation after, select Options > Square or Square root. Countdown timer You can enter a specified time up to 99 hours, 59 minutes, and 59 seconds. The timer starts to count down. The countdown timer only works when the device is switched on. Select Menu > Organiser > Countd. timer. To set the countdown timer, select Normal timer, enter the time in hh:mm:ss format, select OK.
Stopwatch Your device has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second. Using the stopwatch, or allowing it to run in the background when using other features, increases the demand on battery power and reduces the battery life. To use the split time or lap time functions for activities where you need to time yourself, select Menu > Organiser > Stopwatch > Split timing or Lap timing > Start. To stop the stopwatch, select Stop.
of these services, pricing, tariffs, and intructions with your service provider. ■ Extras Select Menu > Extras. To play a game in your device, select Games. To set or view the time in a different location, select Collection > World clock . To calculate exchange rates, select Collection > Converter. ■ UTK Your UIM card may provide additional services. You can access this menu only if it is supported by your UIM card. The name and contents of the menu depend on the available services.
6. Enhancements For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.
7. Battery and charger information This section provides information about your phone batteries, enhancements, chargers, safety guidelines and technical information. Be aware that the information in this section is subject to change as batteries, chargers, and enhancements change. Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4C 860 mAh Li-lon battery. This device is intended for use when supplied with power from the following charger: AC-6U.
reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Always switch the device off and disconnect the charger before removing the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries.
Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: Successful completion of the steps is not a total assurance of the authenticity of the battery.
Authenticate hologram 1. When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. 2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3 and 4 dots on each side respectively. What if you battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery.
performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. • Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses. • Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. • Use chargers indoors.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste.
Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body.
■ Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so.
• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.
• Remove certain call restrictions you have activated in your device. • Change your profile from offline or flight profile mode to an active profile. 2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location. 4. Press the call key. When making an emergency call, give all the necessary information as accurately as possible.
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
■ Technical information Feature Specification Dimensions Width 40 mm Length 110 mm Depth 12 mm Weight 72 g with BL-4C Li-ion battery Wireless networks CDMA 800 MHz Volume 46.4 cc Cell Frequency range (Tx) 824.70~848.31 MHz Cell Frequency range (Rx) 869.70~893.31 MHz Audio formats MIDI, MP3, 4GV-EVRC-B, QCELP Ringing tones MIDI 64 polyphonics ■ Battery information This section provides information about battery charging times with the travel charger (AC-6U), and talk and standby times.
Important: Battery talk and standby times are estimates only and depend on signal strength, network conditions, features used, battery age and condition, temperatures to which battery is exposed, use in digital mode, and many other factors. The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time.
