User’s Guide for Nokia 6610i phone 9230846 Issue 1
LEGAL INFORMATION DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-37 is in conformity with the provisions of the following Council Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. Part No. 9230846 Issue No. 1 Copyright ©2004 Nokia. All rights reserved. Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered trademarks of Nokia Corporation.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.
Manufactured or sold under one or more following US Patents. Asterisk (*) indicates design patents pending.
Contents For your safety......................... 5 General information ................ 8 Access codes ........................................... 8 Security code (5 to 10 digits) ......... 8 PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN .......... 8 PUK and PUK2 codes (8 digits) ...... 8 Barring password (4 digits) ............. 9 Wallet code (4 to 10 digits) ............ 9 Overview of the functions of the phone........................... 10 Camera .......................................
Sending and receiving a business card...................................................... Speed dials ........................................ Info numbers and service numbers.............................................. My numbers ...................................... Caller groups..................................... Profiles (Menu 4)................................. Settings (Menu 5).............................. Personal shortcuts........................... Time and date settings...................
FOR YOUR SAFETY FOR YOUR SAFETY Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
FOR YOUR SAFETY BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. EMERGENCY CALLS Ensure the phone is switched on and in service. Press as many times as needed to clear the display and return to the start screen. Key in the emergency number, then press . Give your location. Do not end the call until given permission to do so.
FOR YOUR SAFETY ■ Shared Memory The following features in this device may share memory: phone book, text and multimedia messages, images and ringing tones in gallery, calendar, to-do notes, and Java games and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many images, bookmarks, Java applications, etc. may use all of the available memory.
General information General information ■ Access codes Security code (5 to 10 digits) The security code helps to protect your phone against unauthorised use. The pre-set code is 12345. Change the code, and keep the new code secret and in a safe place separate from your phone. To change the code, and to set the phone to request the code, see Security settings on page 62.
General information If the codes are not supplied with the SIM card, contact your network operator or service provider for the codes. Barring password (4 digits) The barring password is required when using the Call barring service, see Security settings on page 62. You can obtain the password from your service provider. Wallet code (4 to 10 digits) The wallet code is required to access the wallet services.
Overview of the functions of the phone Overview of the functions of the phone Your phone provides many functions, which are practical for daily use, such as a calendar, a clock, an alarm clock, a camera, a radio, and many more. ■ Camera Your phone has a built-in camera that can be used for taking pictures. For sending a picture via the Multimedia Messaging Service (MMS), see Multimedia messages on page 37, see Camera (Menu 7) on page 65.
Overview of the functions of the phone ■ JavaTM applications Your phone supports Java 2 Micro Edition, J2METM, and includes some JavaTM applications and games that have been specially designed for mobile phones. You can download new applications and games to your phone, see Applications (Menu 11) on page 73. ■ General Packet Radio Service (GPRS) GPRS technology is a network service that allows mobile phones to be used for sending and receiving data over an Internet Protocol (IP) -based network.
Your phone 1. Your phone ■ Keys and connectors 1. Power key Switches the phone on and off. When the keypad is locked, pressing the power key briefly turns the phone’s display lights on for approximately 15 seconds. 2. Volume keys Adjust the volume of the earpiece or the loudspeaker, or the headset when it is connected to the phone. 3. 4-way scroll keys , , and Enables, for example, scrolling through contacts, menus or settings and in calendar, or moving the cursor when writing text. 4.
Your phone 1. Charger connector 2. Pop-PortTM connector used, for example, for headsets and the data cable. 3. Infrared (IR) port 4. Camera lens on the back cover of the phone. ■ Standby mode When the phone is ready for use, and you have not keyed in any characters, the phone is in standby mode. 1. Shows the name of the network or the operator logo to indicate in which cellular network the phone is currently being used. 2. Shows the signal strength of the cellular network at your current location.
Your phone Screen saver The phone automatically activates a screen saver in standby mode after a certain length of time if no phone function is used. See Screen saver on page 60. Press any key to deactivate the screen saver. Wallpaper You can set your phone to display a background picture, wallpaper, when the phone is in standby mode. See Wallpaper on page 59. Essential indicators in standby mode You have received one or several text or picture messages.
Your phone The GPRS connection is suspended (on hold), for example if there is an incoming or outgoing call during a GPRS dial-up connection. The indicator is shown on the top right of the display. Infrared connection indicator, see Infrared on page 82. All your calls are diverted to another number, Divert all voice calls. If you have two phone lines, the divert indicator for the first line is and for the second line . See Call divert on page 56.
Your phone You can carry the stereo headset HDS-3 as shown in the picture. ■ Putting on the wrist strap Thread the strap as shown in the picture and then tighten it.
Getting started 2. Getting started ■ Installing the SIM card and the battery Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.
Getting started 3. To release the SIM card holder, slide the card holder backwards (4) and open it by lifting (5). 4. Insert the SIM card into the SIM card holder (6). Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. 5. Close the SIM card holder (7) and slide it forwards to lock it (8). 6. Replace the battery (9). 7. To replace the back cover: First place the top of the back cover over the locking catch on the top of the phone (10).
Getting started cover towards the locking catches on both sides of the phone and press to lock the cover into place (11). ■ Charging the battery 1. Connect the lead from the charger to the socket on the bottom of your phone. 2. Connect the charger to an AC wall socket. The text Charging is displayed briefly if the phone is switched on. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
Getting started ■ Switching the phone on and off Press and hold the power key . Note that if the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your network operator or service provider. Your phone does not support 5-Volt SIM cards and the card may need to be changed. • If the phone asks for a PIN code, key in the PIN code (displayed as ****), and press OK.
Getting started • Locking the keypad In standby mode, press Menu and then within 1.5 seconds. • Unlocking the keypad Press Unlock and then seconds. within 1.5 To answer a call when the keyguard is on, press . During a call, the phone can be operated normally. When you end or reject the call, the keypad will automatically be locked. For automatic keypad locking, see Automatic keyguard on page 58. For locking the keypad during a call, see Options during a call on page 24.
Getting started ■ Changing the covers Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached. 1. Remove the back cover from the phone. See step 1 in Installing the SIM card and the battery on page 17. 2.
Call functions 3. Call functions ■ Making a call 1. Key in the phone number, including the area code. If you key in an incorrect character, press Clear to delete it. For international calls, press twice for the international prefix (the + character replaces the international access code) and then key in the country code, the area code without the leading 0, if necessary, and the phone number. 2. Press to call the number. 3. Press to end the call or to cancel the call attempt.
Call functions ■ Answering or rejecting an incoming call Press to answer an incoming call and press Press to reject an incoming call. to end the call. If you press Silence, only the ringing tone is muted. Then either answer or reject the call. If a compatible headset supplied with the headset key is connected to the phone, you can answer and end a call by pressing the headset key.
Call functions participant (New call). The first call is put on hold. When the new call has been answered, select Conference to include the first participant in the conference call. To have a private conversation with one of the participants, select Private and select the desired participant. To rejoin the conference call after a private conversation, select Conference. • Lock keypad to activate the keypad lock.
Writing text 4. Writing text You can key in text, for example, when writing messages, using traditional or predictive text input. When you are writing text, the predictive text input is indicated by and the traditional text input by at the top left of the display. The character case is indicated by , , or next to the text input indicator. You can change the character case by pressing . The number mode is indicated by , and you can change between the letter and number mode by pressing and holding .
Writing text 2. When you have finished writing the word and it is correct, confirm it by adding a space with or by pressing any of the scroll keys. Pressing a scroll key also moves the cursor. If the word is not correct, press repeatedly or press Options and select Matches. When the word that you want appears, confirm it. If the ? character is displayed after the word, the word you intended to write is not in the dictionary.
Writing text • To insert a space, press . • To move the cursor to the left, right, down or up, press the scroll keys , , or , respectively. • To delete a character to the left of the cursor, press Clear. Press and hold Clear to delete the characters more quickly. To delete all the characters at once when writing a message, press Options and select Clear text. • To insert a word when using the predictive text input, press Options and select Insert word.
Using the menu 5. Using the menu The phone offers you an extensive range of functions, which are grouped into menus. Most of the menu functions are provided with a brief help text. To view the help text, scroll to the menu function you want and wait for 15 seconds. To exit the help text, press Back. See Help text activation on page 59. ■ Accessing a menu function By scrolling 1. To access the menu, press Menu. 2.
Using the menu ■ List of menu functions 1. Messages 1. Text messages 2. Multimedia msgs. 3. Chat 4. Voice messages 5. Info messages 6. Message settings 7. Service commands 2. Call register 1. Missed calls 2. Received calls 3. Dialled numbers 4. Delete recent call lists 5. Call duration 6. Call costs 7. GPRS data counter 8. GPRS connection timer 3. Contacts 1. Search 2. Add contact 3. Delete 4. Copy 5. Settings 6. Speed dials 7. Info numbers1 8. Service numbers 1 9. My numbers2 10.Caller groups2 4.
Using the menu 4. Rename folder 5. Gallery downloads 9. Organiser 1. Alarm clock 2. Calendar 3. To-do list 10.Games 1. Select game 2. Game downloads 3. Memory 4. Settings 11.Applications 1. Select application 2. App. downloads 3. Memory 12.Extras 1. Calculator 2. Countdown timer 3. Stopwatch 4. Wallet 5. Synchronisation 13.Connectivity 1. Infrared 2. GPRS 14.Services 1. Home 2. Bookmarks 3. Download links 4. Service inbox 5. Settings 6. Go to address 7. Clear the cache 15.Go to 16.SIM services1 1.
Menu functions 6. Menu functions ■ Messages (Menu 1) You can read, write, send and save text, multimedia and e-mail messages. All messages are organised into folders. Before you can send any text, picture, or e-mail message, you need to save your message centre number, see Message settings on page 42. Important: E-mail messages or multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.
Menu functions Writing and sending messages 1. Press Menu, and select Messages, Text messages and Create message. Tip: To start writing messages quickly, press mode. in standby 2. Key in a message. See Writing text on page 26. To insert text templates or a picture into the message, see Templates on page 36. Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message. 3. To send the message, press Options and select Send. 4.
Menu functions 1. Press Menu, and select Messages, Text messages and Create SMS email. 2. Key in the recipient’s e-mail address or search for it in Contacts and press OK. 3. If you wish, you can key in a subject for the e-mail and press OK. 4. Key in the e-mail message. See Writing text on page 26. The total number of characters that you can key in is shown on the top right of the display. The e-mail address and subject are included in the total number of characters.
Menu functions Select Copy to calendar to copy text at the beginning of the message to your phone’s calendar as a reminder note for the current day. Select Message details to view, if available, the sender’s name and phone number, the message centre used, and the date and time of receipt. Select Use detail to extract numbers, e-mail addresses and website addresses from the current message. When reading a picture message, select Save picture to save the picture in the Templates folder. 4.
Menu functions • Key in the name for the list and press OK. Press Options, and select View list . Press Add and select a contact from the phone’s contact memory. To add more contacts to the created list, press Options, select Add contact and select a new contact. • Otherwise, scroll to a list, press Options and you can select • View list to view the contacts on the selected list. Press Options and you can also delete or view details of a selected contact or add a new contact.
Menu functions Inserting a picture into a text message • When you are writing or replying to a message, press Options. Select Insert picture and select a picture to view it. Press Insert to insert the picture into your message. The indicator in the header of the message indicates that a picture has been attached. The number of characters that you can enter in a message, depends on the size of the picture.
Menu functions Multimedia messaging supports the following formats: • Picture: JPEG, GIF, PNG, and BMP. • Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing tones. The phone does not necessarily support all variations of the aforementioned file formats. If a received message contains any unsupported elements, they may be replaced with the file name and the text Object format not supported.
Menu functions 3. To view the message before sending it, press Options and select Preview. 4. To send the message, press Options and select Send to number (or Send to e-mail or Send to many). 5. Enter the recipient’s phone number (or e-mail address) or search for it in Contacts. Press OK and the message is moved to the Outbox folder for sending. It takes more time to send a multimedia message than to send a text message.
Menu functions • Reply or Reply to all to reply to the message. To send the reply, refer to Writing and sending a multimedia message on page 38 • Forward to no., Forward to e-mail or Send to many to forward the message. • Edit to edit a message. You can only edit messages you have created. See Writing and sending a multimedia message on page 38. • Message details to view the subject, size and the type of message. • Details to view the details of the attached image or sound.
Menu functions To discard the waiting message, press Exit and Yes. If you press No, you can view the message. Deleting messages 1. To delete text messages, press Menu, and select Messages, Text messages and Delete messages. To delete all messages from all folders, select All messages and when Delete all messages from all folders? is displayed, press OK. If the folders contain unread messages, the phone will ask whether you want to delete them also.
Menu functions 6. To end the chat session, press OK and press Options and select Quit. To view the most recent messages of the current chat session, press Options and select Chat history. The messages that you sent are indicated by "<" and your nickname and the messages that you received are indicated by ">", and the sender’s nickname. Press Back to return to the message you are currently writing. To edit your nickname, select the option Chat name.
Menu functions Settings for text and e-mail messages 1. Press Menu, and select Messages, Message settings, Text messages and Sending profile. 2. If more than one message profile set is supported by your SIM card, select the set you want to change. • Select Message centre number to save the phone number of the message centre that is required for sending text messages. You will receive this number from your service provider. • Select Messages sent via to select the message type Text, E-mail, Paging or Fax.
Menu functions Press Menu, and select Messages, Message settings, Text messages and Overwriting in inbox or Overwriting in sent items. Select Allowed to set the phone to replace the old text messages with new ones in the Inbox or the Sent items folder, respectively. Settings for multimedia messages Press Menu, and select Messages, Message settings and Multimedia msgs.. Select • Save sent messages. Select Yes to set the phone to save sent multimedia messages in the Sent items folder.
Menu functions • Bearer settings to set the settings for the selected bearer. • GPRS access point. Key in the access point name to establish a connection to a GPRS network and press OK. • IP address. Key in the address, press OK. for a dot, and press • Authentication type. Select Secure or Normal. • User name. Key in the user name and press OK. • Password. Key in the password and press OK. • Allow adverts. You can receive or reject advertisements.
Menu functions call, edit or delete the phone number from the list, save the number in Contacts or send a message to the number. Recent calls lists Press Menu, and select Call register and then select • Missed calls to view the list of the last ten phone numbers from which somebody has tried to call you (network service). The number in front of the (name or) phone number indicates the amount of call attempts from that caller.
Menu functions • Call costs (network service). Select Last call units or All calls’ units to check the cost of your most recent call or all calls in terms of units specified within the Show costs in function. Select Call cost settings and select Clear counters to clear the counters, or select Show costs in to set the phone to show the remaining talk time in terms of charging units, Units, or units of currency, Currency. Contact your service provider for charging unit prices.
Menu functions Selecting settings for contacts Press Menu and select Contacts and Settings. Select • Memory in use to select the memory you want to use for your contacts. To recall names and numbers from both memories for contacts, select Phone and SIM. In that case, the names and numbers will be saved in the phone’s memory. • Contacts view to select how the names, numbers and images in contacts are displayed.
Menu functions 2. To access the list of names and phone numbers, press standby mode. in 3. Scroll to the name saved in the phone’s internal memory for the contact to which you want to add a new number or text item, and press Details. 4. Press Options and select Add number or Add detail. 5. Select one of the following number types Home, Office and Fax, or text types address and E-mail address, Note.
Menu functions 3. Scroll to the name you want, and press Details. Scroll to view the details of the selected name. Tip: To quickly find a name and phone number, press in standby mode. Key in the first letter(s) of the name, and/or scroll to the name you want. Tip: To quickly view a specific name with the default phone number, press and hold at the name while scrolling through the names.
Menu functions Copying contacts You can copy names and phone numbers from the phone’s memory to your SIM card’s memory and vice versa. Note that any text items saved in the phone’s internal memory, such as e-mail addresses, will not be copied to the SIM card. 1. Press Menu and select Contacts and Copy. 2. Select the copying direction, From phone to SIM card or From SIM card to phone. 3. Select One by one, All or Default numbers.
Menu functions standard. You can also send an image attached to the business card via IR, if you have saved images in the phone’s memory. 1. To send a business card, search for the name and phone number you want to send from contacts, press Details and Options and select Send bus. card. 2. To send the business card via IR, make sure that the other phone or the PC is set up to receive data via its IR port and select Via infrared.
Menu functions Contacts and My numbers. Scroll to the desired name or number, and press View. Caller groups You can arrange the names and phone numbers saved in Contacts into caller groups. For each caller group, you can set the phone to sound a specific ringing tone and show a selected graphic on the display when you receive a call from a phone number in the group, see below.
Menu functions • To activate the selected profile, select Activate. • To set the profile to be active for a certain amount of time up to 24 hours, select Timed and set the end time. When the time set for the profile expires, the previous profile that was not timed, becomes active. • To personalise the profile, select Personalise. Select the setting you want to change and make the changes. The same settings can also be changed in the Tone settings menu, see Tone settings on page 60.
Menu functions • To rearrange the functions on the list, select Organise and the desired function. Press Move and select where you want to move the function. Time and date settings Clock Press Menu, and select Settings, Time and date settings and Clock. Select Show clock (or Hide clock) to show (or hide) the time on the top right of the display in standby mode. Select Set the time to adjust the clock to the correct time, and Time format to select the 12-hour or 24hour time format.
Menu functions Call settings Call divert Press Menu, and select Settings, Call settings and Call divert (network service). With call divert, you can direct your incoming calls to another number, for example to your voice mailbox number. For details, contact your service provider. Divert options not supported by your SIM card or your network operator may not be shown.
Menu functions Call waiting Press Menu, and select Settings, Call settings and Call waiting. Select Activate and the network will notify you of an incoming call while you have a call in progress (network service). See Call waiting on page 24. Summary after call Press Menu, and select Settings, Call settings and Summary after call. Select On and the phone will briefly display the approximate duration and cost (network service) of the call after each call.
Menu functions Memory status Press Menu, and select Settings, Phone settings and Memory status. Scroll to view the free memory, the total used memory and the memory used for each function in the list. You may also find the memory information in the menu of some of those functions, for example in Gallery. Automatic keyguard When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Key in the emergency number and press .
Menu functions Confirm SIM service actions See SIM services (Menu 16) on page 93. Help text activation To set the phone to show or not to show the help texts, press Menu, and select Settings, Phone settings and Help text activation. See also Using the menu on page 29. Start-up tone To set the phone to play or not to play a start-up tone when the phone is switched on, press Menu, and select Settings, Phone settings and Startup tone.
Menu functions Menu view To select the way the phone displays the main menu, press Menu, and select Settings, Display settings and Menu view. Select List for the menu list view and Grid for the menu grid view. Operator logo To set your phone to display or hide the operator logo, press Menu, and select Settings, Display settings and Operator logo. If you have not saved the operator logo, the Operator logo menu is dimmed.
Menu functions Note that the settings you make, will change the settings in the active profile. Select Incoming call alert to choose how the phone notifies you of an incoming voice call. The options are Ringing, Ascending, Ring once, Beep once and Off. Select Ringing tone for incoming voice calls. To select ringing tones that have been saved in the Gallery, select Open gallery from the ringing tone list. Select Ringing volume and Vibrating alert for incoming voice calls and messages.
Menu functions • Automatic answer to set the phone to answer an incoming call automatically after five seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be used. • Lights to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a keypress. • When the phone is connected to the full car kit, select Ignition detector and On to automatically switch off the phone approximately 20 seconds after you have switched off the car’s ignition.
Menu functions • Security level. Select Phone and the phone will ask for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone will ask for the security code when the SIM card’s memory is selected and you want to change the memory in use, (see Selecting settings for contacts on page 48) or copy from one memory to another (Copying contacts on page 51). • Access codes to change the security code, PIN code, PIN2 code or barring password.
Menu functions 3. When the radio is on, press Options and select Switch off to turn off the radio. Tip: To quickly turn off the radio, press and hold . Tuning a radio channel When the radio is on, press and hold or to start the channel search. Searching stops when a channel is found. To save the channel, press Options, and select Save channel. Key in the name of the channel and press OK. Select the location where you want to save the channel.
Menu functions • Rename. Key in a new name for the saved channel and press OK. • Loudspeaker (or Headset) to listen to the radio using the loudspeaker (or headset). Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. • Mono output (or Stereo output) to listen to the radio in mono (or in stereo). You can normally make a call or answer an incoming call while listening to the radio. The volume of the radio is muted.
Menu functions 3. To take a photo, press Capture. The phone saves the photo in the Photos folder of the Gallery menu. The saved photo will be shown on the display. To define the default title for the photo, see Default title in Camera settings on page 66. 4. Select Back to take another photo, or press Options and select, for example, an option to delete or rename the saved photo, send it as a multimedia message, or attach the photo to a name or phone number in contacts, or access the gallery.
Menu functions Other available options are: • Add folder to add a new folder. Key in a name for the folder and press OK. • Delete folder to select the folder you want to delete. You cannot delete the original folders on the phone. • Rename folder to select the folder you want to rename. You cannot rename the original folders on the phone. • Gallery downloads to download more images and tones. Select Image downloads or Tone downloads, respectively. The list of available browser bookmarks is shown.
Menu functions • Sort to sort the files and folders by date, type, name or size. • Delete all to delete all the files in the selected folder. • Edit image to insert text, a frame or clip-art into the selected picture. 4. Open the file you want. Press Options and some of the following options are available: • Play (Pause) to listen to or to view a sound or image file that is contained in the message. • Zoom to increase the size of the image that is contained in the message.
Menu functions Press Menu, and select Organiser and Alarm clock. • Select Alarm time, key in the alarm time and press OK. To change the alarm time, select On. • Select Alarm tone and select the default alarm tone, personalise the alarm tone by selecting one from the ringing tone list or from the gallery, or set a radio channel as the alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Menu functions • To view a single note, scroll to the note you want to view, press Options and select View. The note view allows you to view the details of the selected note. You can scroll through the note. • For example, there are also options for making a note, or for sending a note via IR, or as a note directly to another compatible phone’s calendar or as a text message. There are also options for deleting, editing, moving and repeating a note and for copying a note to another day.
Menu functions • Memo - Key in the note, press Options and select Save. Key in the end day for the note and press OK. To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time. • Reminder - Key in the subject for the reminder, press Options and select Save. To set the alarm for the note, select Alarm on and then set the alarm time. When you have set the alarm, the indicator view the notes.
Menu functions While viewing a note, you can also, for example, select an option to edit the selected note, edit the deadline or priority for the note, or mark the note as done. ■ Games (Menu 10) Launching a game 1. Press Menu, and select Games and Select game. 2. Scroll to a game or a game set (the name depends on the game). 3. Press Options and select Open or press single game it will be launched. . If the selection is a Otherwise, a list of games in the selected game set is displayed.
Menu functions To download more games, refer also to Downloading an application on page 74. Note that when downloading a game, it may be saved in the Applications menu instead of the Games menu. Important: Only install applications from sources that offer adequate protection against harmful software. Memory status for games To view the amount of memory available for game and application installations, press Menu, and select Games and Memory. See also Memory status for applications on page 75.
Menu functions Other options available for an application or application set • Delete to delete the application or application set from the phone. Note that if you delete a pre-installed application or an application set from your phone, you may download it again to your phone from the Nokia Software Market, http://www.softwaremarket.nokia.com/ wap. • Web access to restrict the application from accessing the network.
Menu functions see Making a connection to a service on page 86. Try again to connect to the page. For the availability of different services, pricing and tariffs, contact your network operator and/or service provider. • Press Menu, and select Services and Download links. Select to download an appropriate application or game. See Downloading on page 89. • Use the game download functionality, see Game downloads on page 72.
Menu functions Tip: Alternatively, press once to add, twice to subtract, three times to multiply or four times to divide. 4. Key in the second number. 5. For a total, press Options and select Equals. Repeat steps 3 to 5 as many times as is necessary. 6. To start a new calculation, first press and hold Clear. Performing a currency conversion 1. Press Menu, and select Extras and Calculator. 2. To save the exchange rate, press Options and select Exchange rate. Select either of the displayed options.
Menu functions Stopwatch You can measure time, take intermediate times or lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press . Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Time observation and time splitting 1. Press Menu, and select Extras, Stopwatch and Split timing.
Menu functions Wallet In Wallet you can save personal information, for example, credit card numbers and make purchases with your phone where supported by the service provider. You can access wallet via the Wallet menu or via the browser, see Options while browsing on page 87. When you access wallet for the first time, you need to create your own wallet code. At Create wallet code: key in the code and press OK to confirm it and at Verify wallet code: key in the code again and press OK.
Menu functions Personal notes You can save up to 30 confidential personal notes, for example, passwords, codes or notations. Press Menu, select Extras, Wallet and Personal notes. Press Options and you can view, add, edit a selected note and sort notes either by name or date or delete notes. When viewing a note, the option Edit is for editing a note, and Send via text msg. copies the note as a text message. Copy to calendar copies the note to the calendar as a memo.
Menu functions 5. You may receive a sign-in document from the service that you need to sign to make the purchase binding, see Digital signature on page 92. 6. To close the wallet, select Close wallet. See Options while browsing on page 87. Synchronisation Synchronisation allows you to save your calendar and contacts data in a remote Internet server or in a compatible PC. If you have saved data in the remote Internet server, you can synchronise your phone by starting the synchronisation from your phone.
Menu functions The synchronisation settings may differ from the service settings required for browsing. After synchronising, change your Active service settings back to the previous ones if you want to use other services later. 2. Mark the data to be synchronised. See Data to be synchronised in Keying in the synchronisation settings manually on page 81. 3. Press Menu, and select Extras, Synchronisation and Synchronise. 4. The marked data of the active set will be synchronised after confirmation.
Menu functions • User name. Key in the user name and press OK. • Password. Key in the password and press OK. • Synchronisation server. Key in the name of the server and press OK. Synchronising from a compatible PC To synchronise contacts and calendar from a compatible PC, use either an IR connection or a data cable. You also need the PC Suite software of your phone installed on the PC. Start the synchronisation from the PC using PC suite.
Menu functions • When blinks, your phone is trying to connect to the other device or a connection has been lost. GPRS GPRS connection GPRS is a network service. You can set the phone to automatically register to a GPRS network when you switch the phone on. Press Menu, and select Connectivity, GPRS, GPRS connection and Always online. When you start an application using GPRS, the connection between phone and network is established, and data transfer is possible.
Menu functions • Select GPRS access point. Key in the Access Point Name (APN) to establish a connection to a GPRS network and press OK. Contact your network operator or service provider for the access point name. You can also set the GPRS dial-up service settings (Access Point Name) on your PC using the Nokia Modem Options software, see PC Suite on page 94. If you have set the settings both on your PC and on your phone, note that the PC’s settings will be used.
Menu functions want to use. You can also key in the settings manually or add and edit the settings with PC Suite. For more information and for appropriate settings, contact your network operator or service provider that offers the service that you want to use. The settings may be available, for example, on their website. Saving the service settings received as an OTA message When you receive the service settings as an OTA message, Service settings received is displayed.
Menu functions Making a connection to a service 1. Firstly, make sure that the service settings of the service you want to use are activated. To activate the settings: • Press Menu, and select Services, Settings and Connection settings. Select Active service settings and scroll to the connection set you want to activate and press Activate. 2. Secondly, make a connection to the service.
Menu functions that the GPRS connection is suspended (on hold). After the call, for example, the phone tries to reconnect the GPRS connection. Using the phone keys while browsing • Use any of the scroll keys to browse through the page. • To select a highlighted item, press . • To enter letters and numbers, press the keys enter special characters, press the key . - and to Options while browsing Press Options and the following options may be available. The service provider may also offer other options.
Menu functions Appearance settings of the multi-mode browser 1. While browsing, press Options and select Other options and Appear. settings, or in standby mode, press Menu, and select Services, Settings and Appearance settings. 2. Select Text wrapping. Select On and the text continues on the next line if it cannot be shown on one line. If you select Off, the text is abbreviated if it is too long to be shown on one line. Select Show images. Select No and any pictures appearing on the page are not shown.
Menu functions 3. Select Go to to make a connection to the page associated with the bookmark. You can also view the title and the address of the selected bookmark, edit or delete the selected bookmark, or send it directly to another phone as a bookmark, or as an OTA message, or create a new bookmark. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites.
Menu functions Options. Select Retrieve to activate the multi-mode browser and download the marked content, or Details to display detailed information on the service notification, or select Delete to delete it. Service inbox settings Press Menu, and select Services, Settings and Service inbox settings. • Select Service messages and On (or Off) to set the phone to receive (or not to receive) service message. • Select Automatic connection.
Menu functions digital signature. The certificates are saved in the security module by the service provider. Press Menu and select Services, Settings, Security settings and Security module settings. Select • Security module details to show the security module title, its status, manufacturer and serial number. • Module PIN request to set the phone to ask for the module PIN when using services provided by security module. Key in the code and select On. To disable the module PIN request, select Off.
Menu functions • User certificates are issued to users by a Certifying Authority. User certificates are required, for example, to make a digital signature and they associate the user with a specific private key in a security module. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.
Menu functions Note: The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Key in the signing PIN (see General information on page 8) and press OK. The digital signature icon will disappear, and the service may display a confirmation of your purchase. ■ Go to (Menu 15) To access some specific functions quickly, press Menu and selectGo to and select the desired function from the list.
PC Connectivity 7. PC Connectivity You can send and receive e-mails, and access the Internet when your phone is connected to a compatible PC via an IR connection or a data cable. You can use your phone with a variety of PC connectivity and data communications applications. With PC Suite you can, for example, send text messages, synchronise contacts, calendar and to-do notes between your phone and the compatible PC You may find more information and downloadable files on the Nokia website, http://www.nokia.
PC Connectivity • Nokia Multimedia Player plays the multimedia messages you receive via e-mail and audio, image, and video files. You can also create playlists of your favourite multimedia files. • Nokia 6610i data modem drivers enable you to use your phone as a modem. • Nokia Modem Options contains settings for HSCSD and GPRS connections. • Nokia Connection Manager to select the connection type between the PC and the phone.
Battery information 8. Battery information ■ Charging and Discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery.
Technical Information 9. Technical Information Weight....................................87 grams (3,07 ounces) with BLD-5 battery Battery....................................850 mAh Li-Ion Battery Networks................................Wireless networks GSM 900, 1800 and1900 Size (volume)........................4.39 cubic inches (72 cc) Frequency range (Rx) ..................................................EGSM 900: 925 - 960 MHz ..................................................GSM 900: 935 - 960 MHz ...
CARE AND MAINTENANCE CARE AND MAINTENANCE Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep the phone and all its parts and accessories out of the reach of small children. • Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION ■ Traffic safety Do not use a handheld telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. Remember road safety always comes first! ■ Operating environment Remember to follow any special regulations and always switch off your phone wherever forbidden, or when it may cause interference or danger.
IMPORTANT SAFETY INFORMATION • Should use the ear opposite the pacemaker to minimize the potential for interference. • If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing aids Some digital wireless phones may interfere with hearing aids. In the event of such interference, consult your wireless provider.
IMPORTANT SAFETY INFORMATION (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked.
IMPORTANT SAFETY INFORMATION ■ Emergency calls Important: This phone, like any wireless phone, operates using radio signals, wireless, and landline networks as well as userprogrammed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore you should never rely solely upon any wireless phone for essential communications (for example, medical emergencies).
IMPORTANT SAFETY INFORMATION ■ CERTIFICATION INFORMATION (SAR) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
IMPORTANT SAFETY INFORMATION requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX Wireless Phone “Safety Tips” Below are safety tips to follow while driving and using a wireless phone which should be easy to remember. 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2.
APPENDIX stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely. The wireless industry reminds you to use your phone safely when driving. For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/driving/ articles.cfm?ID=85 ■ A message from the U.S. Food and Drug Administration to all users of mobile phones © July 18, 2001 For updates: http://www.fda.gov/cdrh/phones. Consumer Update on Wireless Phones U.S.
APPENDIX notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
APPENDIX 3. What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head.
APPENDIX long-term exposures, since the average period of phone use in these studies was around three years. 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
APPENDIX research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone? All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.
APPENDIX laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9.
APPENDIX was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones.
APPENDIX • World Health Organization (WHO) International EMF Project http://www.who.int/emf • National Radiological Protection Board (UK) http://www.nrpb.org.uk/ July 18, 2001 For updates: http://www.fda.
