RA FT Nokia 3120 classic User Guide FC C D 9207764 Issue 1
0434 DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-365 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. RA FT Copyright © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Navi and Visual Radio are trademarks or registered trademarks of Nokia Corporation.
by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http:// www.mpegla.com. RA FT Nokia operates a policy of ongoing development.
Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. RA FT The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications.
received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Contents SAFETY........................................................................ 9 General information ............................................... 11 RA FT About your device .............................................................................. 11 Network services ................................................................................ 13 Enhancements..................................................................................... 14 Access codes.............................
3. Messaging ........................................................... 39 Write and send a text message...................................................... 39 Write and send a multimedia message ................................................................................................ 40 Read and reply to a message.......................................................... 41 E-mail application ............................................................................. 42 Message settings........
Phone software updates .................................................................. 73 7. PC connectivity................................................... 74 Nokia PC Suite .................................................................................... 74 Data communication applications ................................................ 75 8. Media .................................................................. 76 RA FT Camera ...............................................................
SAFETY SAFETY RA FT Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY D Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST FC C Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
SAFETY SWITCH OFF IN RESTRICTED AREAS Follow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas. RA FT QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS AND BATTERIES D Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE FC C Your device is not water-resistant. Keep it dry.
General information General information About your device RA FT ■ D The wireless device described in this guide is approved for use on the WCDMA 900 and 2100, and GSM 850, 900,1800, and 1900 networks. Contact your service provider for more information about networks. C When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights.
General information RA FT Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.
General information ■ Network services FC C D RA FT To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply.
General information order, and icons. Contact your service provider for more information. ■ D RA FT This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, remote synchronisation, and content downloading using the browser or MMS, require network support for these technologies.
General information ■ Access codes Select Menu > Settings > Security to set how your phone uses the access codes and security settings. RA FT • To prevent accidental key presses, use the keypad lock (keyguard). D Select Menu > Settings > Phone > Automatic keyguard or Security keyguard > On or Off. If the Security keyguard is set On, enter a security code of your choice when requested. C To unlock the keys, select Unlock, and press the * key.
General information • The PIN code, supplied with the SIM card, helps to protect the card against unauthorised use. RA FT • The PIN2 code, supplied with some SIM cards, is required to access certain services. D • PUK and PUK2 codes may be supplied with the SIM card. If you enter the PIN or PIN2 code incorrectly three times in succession, you will be asked for the PUK or PUK2 code. If you do not have them, contact your service provider.
General information ■ Software updates RA FT Important: Use only services that you trust and that offer adequate security and protection against harmful software. C D Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application.
General information Make sure that the device battery has enough power, or connect the charger before starting the update. ■ RA FT If software updates over the air are supported by your network, you may also be able to request updates through the device. See “Phone,” p. 69. Download content D You may be able to download new content (for example, themes) to your phone (network service). C For the availability of different services, pricing, and tariffs, contact your service provider.
Get started downloads, and services related to your Nokia product. RA FT On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centres at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service centre at www.nokia.com/repair. ■ C D 1.
Get started FC C D RA FT with the gold-coloured contact area facing down (67).
■ RA FT Get started Charge the battery D Charging the BL-4U battery with the AC-3 charger takes approximately 2 hours 15 minutes while the phone is in the standby mode. FC C 1. Connect the charger to a wall socket. 2. Connect the lead from the charger to the charger connector at the bottom of your phone.
Get started ■ RA FT If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. Switch the phone on and off 1. Press and hold the power key as shown. C D 2. If the phone asks for a PIN or a UPIN code, enter the code (for example, displayed as ****), and select OK.
Get started ■ Set the time, zone, and date RA FT When you switch on your phone for the first time, the phone is in the standby mode, and you are asked to set the time and date. Fill in the fields, and select Save. D To access Date and time later, select Menu > Settings > Date and time > Date & time settings, Date and time format, or Auto-update of time (network service) to change the time, time zone, and date settings.
Get started provider, nearest authorised Nokia dealer, or visit the support area on the Nokia website, www.nokia.com/ support. FC C D RA FT When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. Select Show > Save. If required, enter the PIN code supplied by the service provider.
Get started ■ Antenna FC C D RA FT Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
Get started ■ Keys and parts 1. Front camera lens 3. Display 4. Left selection key 5. Right selection key 6. Call key D 7. End key FC C 8. Middle selection key 9. Keypad 10.Navi™ key (herein referred to as scroll key) 26 RA FT 2.
Get started 11.Microphone 13.Enhancements connector 14.USB connector D 15.Camera lens RA FT 12.Charger connector Ne ics C 17.Power key ed ed 16.Camera flash ap h Gr 19.Volume up key/PTT Ne w FC 18.Loudspeaker 20.
Get started ■ microSD memory card RA FT The microSD memory card, inserted in your phone, can be loaded with data such as ringing tones, themes, tones, images and videos. If you delete, reload, or replace this card, these functions and features may not function properly. D You can remove or replace a microSD card during phone operation without switching the phone off. FC C Use only compatible microSD cards approved by Nokia for use with this device.
Get started D FC C 1. Remove the battery cover of the phone. Insert the card with the goldcoloured contact area facing down (1). RA FT operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 2. Press the card into the slot until it clicks into place (2). Replace the battery cover.
Get started ■ Standby mode 1. 3G indicator RA FT When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. 2. Signal strength of the cellular network 3. Battery charge level D 4. Indicators. See “Indicators,” p. 31. FC C 5. Name of the network or the operator logo 6. Clock 7. Display 8. The left selection key is Go to or a shortcut to a function that you have selected. See “Left selection key,” p. 60.
Get started 9. The middle selection key is Menu. RA FT 10.The right selection key may be Names to access the list of contacts in the Contacts menu, an operator-specific name to access an operator-specific website, or a shortcut to a function that you have selected. See “Right selection key,” p. 60. D Indicators You have unread messages. FC C The phone registered a missed call. See “Log,” p. 54. The keypad is locked. See “Access codes,” p. 15.
Get started and Message alert tone are set to Off. See “Tones,” p. 57. RA FT The alarm clock is set to On The packet data connection mode, Always online is selected and the packet data service is available, the indicator is shown. , A GPRS or EGPRS connection is established. , The GPRS or EGPRS connection is suspended (on hold). D , ■ FC C Bluetooth connectivity is activated. See “Connecting with Bluetooth,” p. 62.
Get started radio sensitive environments—on board aircraft or in hospitals. When the flight profile is active, is shown. RA FT Select Menu > Settings > Profiles > Flight > Activate or Personalise. To set the phone to ask every time it is switched on whether to use the flight profile, select Menu > Settings > Phone > Flight query > On or Off. D To deactivate the flight profile, select any other profile.
Calls 2. Calls ■ RA FT device is locked and in the flight profile, you may be also able to enter an official emergency number programmed in your device in the lock code field and select 'Call'. The device will confirm that you are about to exit flight profile to start an emergency call. Make a voice call D Do one of the following: C • Enter the phone number, including the area code if required, and press the call key.
Calls • To list the last called numbers, press the call key once. To call one of the numbers, select it, and press the call key. RA FT • Call a number saved in Contacts. See “Contacts,” p. 51. To increase or decrease the volume during a call, press the volume key up or down. Answer or reject a call D ■ C To answer a call, press the call key. To end the call, press the end key. FC To reject a call, press the end key. To mute the ringing tone, select Silence.
Calls 1. Select Menu > Contacts > Speed dials. 2. Scroll to the speed-dialling number that you want. RA FT 3. Select Assign, or if a number has already been assigned to the key, select Options > Change. 4. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. D Select Menu > Settings > Call > Speed dialling > On or Off. ■ FC C To call a number, press and hold a speed-dialling key until the call begins.
Calls ■ RA FT Possible options that your service provider may offer include conference calls, video sharing and placing calls on hold. Make a video call 1. To start a video call, enter the phone number in the standby mode, or select Contacts and a contact. FC C D 2. Press and hold the call key, or select Options > Video call. Starting a video call may take a while. Video call and an outgoing animation is shown.
Calls 3. To end the call, press the end key. RA FT When you make a video call, you send a real-time video to the recipient of the call. The video image captured by the camera on the front of your phone is shown to the video call recipient. FC C D To make a video call, you must have a USIM card and be connected to a WCDMA network. For availability of and subscription to video call services, contact your network operator or service provider. A video call can only be made between two parties.
Messaging 3. Messaging Write and send a text message RA FT ■ 1. Select Menu > Messaging > Create message > Message. D 2. Enter one or more phone numbers in the To: field. To retrieve a phone number from a memory, select Add. 3. Write your message in the Text: field. C To use a text template, scroll down, and select Insert. FC 4. Select Send.
Messaging ■ Write and send a multimedia message RA FT 1. Select Menu > Messaging > Create message > Message. 2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add. D 3. Write your message. To add a file, scroll down, and select Insert. FC C 4. To view the message before sending it, select Options > Preview. 5. Select Send.
Messaging The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. ■ RA FT To check availability and to subscribe to the multimedia messaging service (MMS, network service), contact your service provider. Read and reply to a message D 1. To view a received message, select Show. C To read the message later, select Menu > Messaging > Inbox. FC 2. To reply to a message, select Reply.
Messaging ■ E-mail application To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. RA FT To use the e-mail function on your phone, you need a compatible e-mail system. You may receive the e-mail configuration settings as a configuration message. D E-mail setup wizard FC C Select Menu > Messaging > E-mail and enter your email address. The e-mail application requires an internet access point without a proxy.
Messaging Write and send e-mail RA FT You can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail. 1. Select Menu > Messaging > Create message > Email. D If more than one e-mail account is defined, select the account from which you want to send the email. C 2. Enter the recipient’s e-mail address, write the subject, and enter the message. To attach a file to the e-mail, select Options > Insert.
Messaging To send an e-mail from a draft folder, select Menu > Messaging > Drafts and the desired message. RA FT Read and reply to e-mail 1. Select Menu > Messaging, the account name, and the desired message. D 2. To reply to an e-mail, select Options > Reply. Confirm or edit the e-mail address and subject, and create your reply. 3. To send the message, select Send. FC C To end the e-mail session, select Options > Disconnect. Important: Exercise caution when opening messages.
Messaging ■ Message settings General settings RA FT General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and from the following options: D Save sent messages — to save the sent messages in the Sent items folder FC C Overwrite sent items — to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you selected Save sent messages.
Messaging Text messages RA FT Graphical smileys — to replace character-based smileys with graphical ones The text message settings affect the sending, receiving, and viewing of text messages. Select Menu > Messaging > Message settings > Text messages, and from the following options: D Delivery reports — to receive delivery reports about your messages (network service) FC C Message centres — to add a message centre that is required for sending text messages.
Messaging Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service) RA FT Use packet data — to set GPRS as the preferred SMS bearer Character support — to select how characters in the messages are sent. Select Full to send the characters as they are viewed. C D Rep.
Messaging enter the settings manually. See “Configuration,” p. 71.
Messaging home network. The availability of this menu depends on your phone. RA FT Incoming MMS msgs. — to decide how multimedia messages are retrieved. This setting is not shown if Allow MMS receptn. is set to No. Allow adverts — to receive or reject advertisements. This setting is not shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject. FC C D Configuration sett. — to view the configurations that support multimedia messaging.
Messaging service,” p. 23. You can also enter the settings manually. See “Configuration,” p. 71. RA FT Select Menu > Messaging > Message settings >Email messages, and from the following options: New e-mail notif. — to select whether a notification is shown when new e-mail is received Allow mail reception — to select whether e-mail can be received when you are outside your home network D Reply with orig. msg.
Contacts 4. Contacts ■ RA FT You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. Save names and phone numbers Add contact details C ■ D Select Menu > Contacts > Names > Options > Add new contact. Names and numbers are saved in the phone memory. FC Select Menu > Contacts > Settings, and ensure that the Memory in use is Phone or Phone and SIM.
Contacts ■ RA FT Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the available options. Search for a contact ■ D Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for. Copy or move contacts FC C You can move and copy contacts from the phone memory to the SIM card memory or vice versa. The SIM card can save names with one phone number attached to them.
Contacts To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to the contact, and select Options > Move contact or Copy contact. Edit contacts D ■ RA FT To move or copy multiple contacts, select Menu > Contacts > Names. Scroll to a contact, and select Options > Mark. Mark the other contacts, and select Options > Move marked or Copy marked. FC C Select Menu > Contacts > Names. Scroll to the contact, and select Options > Edit, and scroll to the details you want to change.
Log ■ Contact settings Select Menu > Contacts > Settings, and from the following options: RA FT Memory in use — See “Add contact details,” p. 51. Contacts view — to select how the names and numbers in Contacts are displayed Name display — to select whether the contact’s first or last name is displayed first D Font size — to set the font size for the list of contacts C Memory status — to view the free and used memory capacity FC 5.
Settings select All calls. To view the contacts to whom you most recently sent messages, select Msg. recipients. RA FT To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log. D Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Profiles FC ■ C 6.
Settings Personalise — to customise the profile with ringing tones, ringing volume, vibrating alerts, light effects, and message alert tones. ■ RA FT Timed — to set the profile to be active for a certain time up to 24 hours. After this time the previous profile becomes active. Themes D Select Menu > Settings > Themes, and from the following options: FC C Select theme — to set a theme. A list of folders in Gallery opens. Open the Themes folder, and select a theme.
Settings ■ Tones Select Menu > Settings > Tones. RA FT Select Options > Save to save the settings or Cancel to leave the settings unchanged. If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds. ■ Display C D To personalise your display view, adjust the display settings.
Settings Wallpapers > Image or Slide set, scroll to a folder, and select an image or slide set. RA FT Active standby — to select whether the active standby mode is used.
Settings Sleep mode — to save battery power, the display turns black when no function of the phone is used for a certain time RA FT Font size — to set the font size for reading and writing messages, and viewing contacts and web pages Operator logo — to set your phone to display or hide the operator logo, if available Date and time FC ■ C D Cell info display — to receive information from the network operator depending on the network cell used (network service) Select Menu > Settings > Date and time
Settings ■ My shortcuts Left selection key RA FT Personal shortcuts give you quick access to frequently used functions of the phone. To select a function from the list, select Menu > Settings > My shortcuts > Left selection key. D Right selection key C To select a function from the list, select Menu > Settings > My shortcuts > Right selection key.
Settings Active standby key ■ RA FT To select a function from the list, select Menu > Settings > My shortcuts > Active standby key. Sync and backup Select Menu > Settings > Sync and backup, to synchronise or copy data between your phone and another phone or remote server (network service).
Settings ■ Connectivity RA FT You can connect your phone to a compatible device using Bluetooth wireless technology or a USB data cable. Connecting with Bluetooth FC C D This device is compliant with Bluetooth Specification 2.
Settings RA FT meter (33 feet) range. Since phones using Bluetooth technology communicate using radio waves, your phone and the other phones do not need to be in direct line of sight, although the connection can be subject to interference from obstructions, such as walls, or from other electronic devices. Features using Bluetooth technology increase the demand on battery power and reduce the battery life. D Activate a Bluetooth connection C Select Menu > Settings > Connectivity > Bluetooth > On.
Settings Connect a Bluetooth device RA FT Select Menu > Settings > Connectivity > Bluetooth > Connect audio enhan. and the device that you want to connect to. View a list of your Bluetooth connections D Select Menu > Settings > Connectivity > Bluetooth > Active devices. C Send data to a Bluetooth device FC Select Menu > Settings > Connectivity > Bluetooth > Paired devices. Select the device that you want to connect to, and enter a passcode.
Settings If you do not see the device on the list, select New to list Bluetooth devices in range. RA FT Hide your Bluetooth device from others D Select Menu > Settings > Connectivity > Bluetooth > My phone's visibility. Select Hidden, or turn off Bluetooth completely. Synchronise from a compatible PC FC C To synchronise data from calendar, notes, and contacts, install the Nokia PC Suite software for your phone on a compatible PC.
Settings Synchronise from a server USB data cable RA FT To use a remote internet server, subscribe to a synchronisation service. For more information and the settings required for this service, contact your service provider. C D You can use the USB data cable, CA-101, to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. FC Ask on conn.
Settings phone to a PC to synchronise it with Windows Media Player (music, video) RA FT Data storage — to connect to a PC that does not have Nokia software and use your phone for data storage To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Ask on conn., PC Suite, Printing & Media, or Data storage. Call D ■ C Select Menu > Settings > Call, and from the following options: FC Call divert — to divert your incoming calls (network service).
Settings Automatic redial — to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt RA FT Voice clarity — to enhance speech intelligibility, especially in noisy environments Speed dialling — See “Speed dialling,” p. 35. D Call waiting — to receive a notification when you have an incoming call while you are on a call (network service).
Settings ■ Phone Select Menu > Settings > Phone, and from the following options: D RA FT Language settings — to set the display language of your phone, select Phone language. Automatic selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for the voice playback, select Recognition lang.. C Memory status — to view the amount of used and available phone memory Automatic keyguard — See “Access codes,” p. 15.
Settings Welcome note — to write the note that is shown when the phone is switched on RA FT Phone updates — to update your phone software if there is an update available Network mode — to select dual mode (UMTS or GSM). You cannot access this option during an active call. C D Operator selection — to set the phone to automatically select one of the cellular networks available in your area, select Automatic. With Manual, you can select a network that has a roaming agreement with your service provider.
Settings ■ Enhancements RA FT This menu or the following options are shown if the phone is, or has been, connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements.
Settings Your service provider may also send you these settings as a configuration message. RA FT Select Menu > Settings > Configuration and from the following options: Default config. sett. — to view the service providers saved in the phone. To set the configuration settings of the service provider as default settings, select Options > Set as default. D Activ. def. in all apps. — to activate the default configuration settings for supported applications FC C Preferred access pt.
Settings ■ RA FT Personal config. sett. — to add new personal accounts for various services manually, and to activate or delete them. The parameters differ according to the selected service type. Restore factory settings D To reset some of the menu settings to their original values, select Menu > Settings > Rest. factory sett. Enter the security code. The names and phone numbers saved in Contacts are not deleted.
PC connectivity RA FT Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update. 7. PC connectivity ■ FC C D You can send and receive e-mail, and access the internet when your phone is connected to a compatible PC through a Bluetooth connection or a data cable.
PC connectivity ■ RA FT and a compatible PC or a remote internet server (network service). You may find more information and PC Suite at www.nokia.com/support or your local Nokia website. Data communication applications D For information on using a data communication application, refer to the documentation provided with it. C Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation.
Media 8. Media ■ RA FT You can take photos or record live video clips with the built-in 2.0-megapixel camera. Camera D The camera produces pictures in .jpg format, and you can digitally zoom up to eight times. Take an image FC C Select Menu > Media > Camera > Capture. To take another image, select Back; to send the image as a multimedia message, select Send. Your phone saves the image in Gallery > Images. To zoom in or out, press the volume key up or down.
Media ■ Video You can record video clips in .3gp or .mp4 format. RA FT To set the quality of your video clips, select Menu > Media > Video > Options > Settings > Video clip quality > High, Normal, or Basic. To select the file size limit, select Menu > Media > Video > Options > Settings > Video clip length. D Record a video clip C Select Menu > Media > Video > Record. To zoom in or out, press the volume key up or down.
Media to the phone with the Nokia Audio Manager application, which is part of Nokia PC Suite. RA FT To open the music player, select Menu > Media > Music player. Radio D The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. FC C Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.
Media Save stations RA FT 1. To search for radio stations, select and hold or . To change the radio frequency in 0.05 MHz steps, press or . 2. To save the station to a memory location 1 to 9, press and hold the corresponding number key. D 3. To save the station in a memory location from 10 to 20, press 1 or 2, and press and hold a number key from 0 to 9. Listen C 4. Enter the name of the station, and select OK. FC 1. Select Menu > Media > Radio. 2.
Media Switch off — to turn off the radio RA FT Save station — to save a new radio station by entering the station's name. This option is only displayed when the selected radio station is not saved. Stations — to select a saved station from the list. It is only possible to enter the station list if the selected station has been previously saved. D Search all stations — to search for all radio stations that the phone can receive C Set frequency — to enter the frequency of the radio station.
Media Station directory — to open the Visual Radio service using a web link to a radio station guide RA FT Visual Radio — to set whether the Visual Radio application is used. Some radio channels may send text or graphical information that you can view using Visual Radio. D Enable visual service — to set whether the Visual Radio application starts automatically when you turn on the radio C You can normally make a call or answer an incoming call while listening to the radio.
Battery and charger information RA FT 9. Battery and charger information FC C D Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4U. This device is intended for use when supplied with power from the following chargers: AC-3. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery and charger information the charging indicator appears on the display or before any calls can be made. RA FT Always switch the device off and disconnect the charger before removing the battery. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.
Battery and charger information circuiting the terminals may damage the battery or the connecting object. RA FT Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. D Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries.
Battery and charger information Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children. Nokia battery authentication guidelines RA FT ■ Always use original Nokia batteries for your safety.
Battery and charger information Authenticate hologram RA FT 1. When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle. FC C D 2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.
Battery and charger information RA FT Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. FC C D To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance Care and maintenance RA FT Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. D • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
Care and maintenance • Do not attempt to open the device other than as instructed in this guide. RA FT • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. D • Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.
Care and maintenance These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service. RA FT Disposal C D The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.
Additional safety information Additional safety information RA FT ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. FC C D ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body.
Additional safety information RA FT Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased. FC C D ■ Medical devices Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices.
Additional safety information medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should: RA FT • Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on. • Not carry the wireless device in a breast pocket. D • Hold the wireless device to the ear opposite the medical device to minimise the potential for interference.
Additional safety information Hearing aids RA FT Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. C D ■ Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems.
Additional safety information RA FT air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. D Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft.
Additional safety information ■ D RA FT in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information device for essential communications like medical emergencies. To make an emergency call: RA FT 1. If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to complete the following: • Insert a SIM card if your device uses one. D • Remove certain call restrictions you have activated in your device. • Change your profile from offline or flight profile mode to an active profile. FC C 2.
Additional safety information may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. RA FT ■ Certification information (SAR) This mobile device meets guidelines for exposure to radio waves. C D Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
Additional safety information RA FT maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.86 W/kg. D Use of device accessories and enhancements may result in different SAR values.
APPENDIX APPENDIX RA FT ■ A message from the CTIA Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use FC C D Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX RA FT The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.
APPENDIX features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. RA FT 2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. FC C D 3.
APPENDIX traffic. As a driver, your first responsibility is to pay attention to the road. RA FT 5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles. FC C D 6.
APPENDIX the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. D RA FT 8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community.
APPENDIX RA FT to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. FC C D 11. Call roadside assistance or a special wireless nonemergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services.
APPENDIX approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely. RA FT The wireless industry reminds you to use your phone safely when driving. For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/ driving/articles.cfm?ID=85 C D ■ Message from the FDA See http://www.fda.gov/cellphones/ for updated information.
APPENDIX RA FT stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research.
APPENDIX Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: RA FT • Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and D • Cooperate in providing users of wireless phones with the best possible information on po
APPENDIX • National Telecommunications and Information Administration RA FT The National Institutes of Health participates in some interagency working group activities, as well. D FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.
APPENDIX FC C D RA FT FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996.
APPENDIX assessment of additional research needs in the context of the latest research developments around the world. RA FT What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone? D If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF).
APPENDIX exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. RA FT What about children using wireless phones? FC C D The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones.
APPENDIX Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? FC C D RA FT Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head.
APPENDIX C D RA FT those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "handfree" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption.
APPENDIX FC C D RA FT may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important postgrant test, from a consumer’s perspective, is testing of the RF emissions of the phone.
APPENDIX ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis. FC C D RA FT FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.
APPENDIX FCC’s measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach.
