R1105_en.
legal-information1.fm Page 2 Monday, January 17, 2005 12:01 PM DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-36 is in conformity with the provisions of the following Council Directive: 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/ Copyright © 2004 Nokia. All rights reserved.
legal-information1.fm Page 3 Monday, January 17, 2005 12:01 PM ABOUT ADD-ON APPLICATIONS FOR YOUR NOKIA 6680 In the sales package you will find a Reduced-Size Dual Voltage MultimediaMemoryCard (RS-MMC) that contains additional applications from Nokia and third-party developers. The content of the RS-MMC and the availability of applications and services may vary by country, retailer and/or network operator. The applications and further information about the use of the applications at www.nokia.
Contents R1105_en.book Page 4 Friday, January 14, 2005 3:00 PM Contents For your safety...........................................9 Personalise your phone ...........................12 Set tones................................................................................ 13 Offline profile ............................................................... 13 Transfer content from another phone .......................... 14 Change the look of your phone ......................................
Camera and Gallery ................................ 30 Messaging.................................................42 Camera ...................................................................................30 Take pictures .................................................................30 Take pictures in a sequence......................................32 You in the picture—self-timer..................................32 The flash .........................................................................
Contents R1105_en.book Page 6 Friday, January 14, 2005 3:00 PM Other settings............................................................... 56 Create calendar entries ..................................................... 58 Calendar views............................................................. 59 Set a calendar alarm .................................................. 59 Remove calendar entries........................................... 59 Calendar settings............................................
Join and leave an IM group..............................................74 Chat .........................................................................................74 Record chats..................................................................75 View and start conversations...........................................75 IM contacts ...........................................................................76 Manage IM groups..............................................................
Contents R1105_en.book Page 8 Friday, January 14, 2005 3:00 PM Charging and discharging...............................................103 Care and maintenance ......................... 104 Additional safety information............. 105 Index ......................................................
R1105_en.book Page 9 Friday, January 14, 2005 3:00 PM For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH OFF WHEN REFUELLING Don't use the phone at a refuelling point. Don't use near fuel or chemicals. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. SWITCH OFF NEAR BLASTING Follow any restrictions.
R1105_en.book Page 10 Friday, January 14, 2005 3:00 PM CONNECTING TO OTHER PHONES When connecting to any other phone, read its user guide for detailed safety instructions. Do not connect incompatible products. About your device To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function.
R1105_en.book Page 11 Friday, January 14, 2005 3:00 PM browser or over MMS, require network support for these technologies. Enhancements, batteries, and chargers Check the model number of any charger before use with this phone. This phone is intended for use when supplied with power from ACP-12 and LCH-12. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.
Personalise your phone R1105_en.book Page 12 Friday, January 14, 2005 3:00 PM 12 Personalise your phone Note: Your service provider or network operator may have requested a different order for menu items or the inclusion of different icons in the phone menu. Contact your service provider or network operator or Nokia Customer Care for assistance with any features that differ from those described in this guide.
Set tones To set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles. You can see the currently selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown. To change the profile, press in the standby mode. Scroll to the profile you want to activate, and select OK.
Personalise your phone R1105_en.book Page 14 Friday, January 14, 2005 3:00 PM Bluetooth connection is automatically reactivated after leaving the Offline profile. See ‘Bluetooth connection settings’, p. 79. Transfer content from another phone You can copy contacts, calendar, images, video, and sound clips using a Bluetooth connection, from a compatible Nokia Series 60 phone. You can use your Nokia 6680 device without a SIM card.
Options in the Themes main view are Preview/ Theme downloads, Apply, Edit, Help, and Exit. To activate a theme, scroll to it, and select Options > Apply. To preview a theme, scroll to it, and select Options > Preview. To edit themes, scroll to a theme, and select Options > Edit to change the following options: • Wallpaper—The image to be shown as a background image in the standby mode. • Colour palette—The colours used on the screen.
Your phone R1105_en.book Page 16 Friday, January 14, 2005 3:00 PM Your phone Clock Options in Clock are Set alarm, Reset alarm, Remove alarm, Settings, Help, and Exit. Press , and select Clock. To set a new alarm, select Options > Set alarm. Enter the alarm time, and select OK. When the alarm is active, the indicator is shown. To turn off the alarm, select Stop. When the alarm tone sounds, press any key, or select Snooze to stop the alarm for five minutes, after which it will resume.
To add cities to the list, select Options > Add city. Enter the first letters of the city name. The search field appears automatically, and the matching cities are displayed. Select a city. You can add a maximum of 15 cities to the list. To set your current city, scroll to a city, and select Options > My home city. The city is displayed in the clock main view, and the time in your phone is changed according to the city selected. Check that the time is correct and matches your time zone.
Your phone R1105_en.book Page 18 Friday, January 14, 2005 3:00 PM Icons in File mgr.: Folder Folder that has a subfolder To free phone memory, transfer data to a memory card in the file manager. Mark files to be moved, select Move to folder > Memory card, and a folder. To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name. To remove data to free memory, use File mgr., or go to the respective application.
compatibility of an MMC with its manufacturer or provider. Press , and select Tools > Memory. You can use a memory card as extra storage space. See the Quick start guide, ‘Inserting the memory card’. You can also back up information from phone memory, and restore the information to the phone later. You cannot use the memory card if the door of the memory card slot is open. Keep all memory cards out of the reach of small children. Do not open the memory card slot door in the middle of an operation.
Make calls R1105_en.book Page 20 Friday, January 14, 2005 3:00 PM Make calls Voice call Tip! To increase or decrease the volume during a call, press or . 1 In the standby mode, enter the phone number, including the area code. Press to remove a number. For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2 Press to call the number.
can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active. Icons: You are not receiving video (either the recipient is not sending video, or the network is not transmitting it). You have denied video sending from your phone. To send a still image instead, see ‘Call settings’, p. 87. 1 To start a video call, enter the phone number in the standby mode, or select Contacts, and select a contact.
Make calls R1105_en.book Page 22 Friday, January 14, 2005 3:00 PM 3 When the new call is answered, to join the first participant in the conference call, select Options > Conference. To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. The phone supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private.
2 To end the video call, press . Note: Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider. Call waiting (network service) You can answer a call while you have another call in progress if you have activated Call waiting (network service) in Tools > Settings > Call > Call waiting.
Make calls R1105_en.book Page 24 Friday, January 14, 2005 3:00 PM attached), End active call, Use front camera/Use back camera, Zoom in/Zoom out, and Help. Log Recent calls To monitor the phone numbers of missed, received, and dialled calls, press , and select Connect. > Log > Recent calls. The phone registers missed and received calls only if the network supports these functions, the phone is switched on, and within the network’s service area.
To monitor all voice and video calls, text messages, or data connections registered by the phone, press , select Connect. > Log, and press to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information. Tip! To view a list of sent messages, press select Messaging > Sent.
Contacts (Phonebook) R1105_en.book Page 26 Friday, January 14, 2005 3:00 PM Contacts (Phonebook) Press , and select Contacts. In Contacts you can add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 48.
The default number or address is underlined in the contact card. Copy contacts Tip! To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, or Via Bluetooth. See ‘Messaging’, p. 42 and ‘Send data using a Bluetooth connection’, p. 80. • To copy names and numbers from a SIM card to your phone, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.
Contacts (Phonebook) R1105_en.book Page 28 Friday, January 14, 2005 3:00 PM Voice dialling You can make a phone call by saying a voice tag that has been added to a contact card. Any spoken words can be a voice tag. Before using voice tags, note the following: • Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise.
Create contact groups 1 In Contacts, press to open the groups list. 2 Select Options > New group. 3 Write a name for the group or use the default name Group %N, and select OK. 4 Open the group, and select Options > Add members. 5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add. 6 Select OK to add the contacts to the group. Contacts (Phonebook) R1105_en.
Camera and Gallery R1105_en.book Page 30 Friday, January 14, 2005 3:00 PM Camera and Gallery Camera Respect the personal rights of others and obey the local laws, regulations, and customs when taking and using images or video clips. Your Nokia 6680 device has two cameras, a high resolution camera on the back of the device, and a lower resolution camera on the front. Both can be used to take still pictures and video.
camera, Activate night mode/Deact. night mode, Sequence mode/Normal mode, Self-timer, Go to Gallery, Adjust, Settings, Help, and Exit. Camera indicators show the following: • The phone memory ( ) and memory card ( ) indicators (1) show where images are saved. • The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your phone or the memory card. • The zoom indicator (3) shows the zoom level. Press to zoom in, press to zoom out.
Camera and Gallery R1105_en.book Page 32 Friday, January 14, 2005 3:00 PM • Camera goes into battery saving mode if there are no key presses within a minute. To continue taking pictures, press . After the image has been taken, note the following: • If you do not want to keep the image, press . • To return to the viewfinder to take a new picture, press . • To send the image via Bluetooth, via e-mail, or Via multimedia, press . For more information see ‘Messaging’, p. 42 and ‘Bluetooth connection’, p. 79.
Brightness—Scroll left and right to select the appropriate brightness setting. Contrast—Scroll left and right to select the appropriate contrast setting. White balance (back camera only)—Select the current lighting condition from the list. This allows the camera to reproduce colours more accurately. Colour tone (back camera only)—Select a colour effect from the list. The screen display changes to match any settings made, showing you how the final pictures or videos will look.
Camera and Gallery R1105_en.book Page 34 Friday, January 14, 2005 3:00 PM Video recorder indicators show the following: • The phone memory ( ) and memory card ( ) indicators (1) show where the video is saved. • The current video length indicator (2) shows elapsed time and time remaining. • The zoom indicator (3) shows the zoom level. Press to zoom in on your subject before or during recording. Press to zoom out. • The microphone indicator (4) shows that the microphone is muted.
Length—If you select Maximum, the length of the video recording is restricted by the available space on your memory card, and up to one hour per clip. You cannot send a video clip recorded like this by MMS, due to the recording properties. Select Short to record video clips up to 300 kB (approximately 30 seconds in duration) so that they can be conveniently sent as a multimedia message to a compatible device.
Camera and Gallery R1105_en.book Page 36 Friday, January 14, 2005 3:00 PM To search for a file, select Options > Find. Start to enter a search string (for example, the name or date of the file you are searching). Files that match your search are shown. View images Pictures taken with Camera are stored in Gallery. Images can also be sent to you in a multimedia message, as an e-mail attachment, or through a Bluetooth connection.
Imaging Video editor To create custom video clips, press , and select Imaging > Vid. editor. To create custom video clips, combine and trim video clips, and add sound clips, transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips. Edit video, sound, and transitions 1 Mark and select one or more video clips. 2 Select Options > Edit.
Imaging R1105_en.book Page 38 Friday, January 14, 2005 3:00 PM • Remove—Removes the sound clip from the video. • Duplicate—Makes a copy of the selected video clip or sound clip. Edit transition—There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active. 3 Select Save to save your video. Define the Memory in use in the Settings. The default is the phone memory.
MMC. You can select from a list of available printers displayed in the printer selection view. Note: To print to a PictBridge-compliant printer, select Image print before you connect the USB cable. Press , and select Imaging > Image print. Select the images you want to print. Options in the image selection view are Print, Mark/ Unmark, Open (displayed when you select an album), Help, and Exit.
Imaging R1105_en.book Page 40 Friday, January 14, 2005 3:00 PM include content that is not compliant with 3GPP standards and, therefore, is not supported by this phone. Options in RealPlayer when a clip is selected are Play, Play in full screen/Continue, Continue in full scr.; Stop, Mute/Unmute, Clip details, Send, Settings, Help, and Exit.
See ‘Data and settings’, p. 48. For more information, contact your network operator or service provider. Change the RealPlayer settings Select Options > Settings and from the following: Video—To have RealPlayer automatically repeat video clips after they finish playing. Audio settings—To select if you want to repeat playing of track lists and play sound clips on a track list in random order.
Messaging R1105_en.book Page 42 Friday, January 14, 2005 3:00 PM Messaging Press , and select Messaging. In Messaging, you can create, send, receive, view, edit, and organise text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data through a Bluetooth connection, receive Web service messages, cell broadcast messages, and send service commands.
delivery report of a multimedia message that has been sent to an e-mail address might not be possible. Tip! When you have opened any of the default folders, you can switch between the folders by pressing or . To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options > Service command in the main view of Messaging.
Messaging R1105_en.book Page 44 Friday, January 14, 2005 3:00 PM Press to open a list of special characters. Use to move through the list, and press Select to select a character. • To insert a space, press . To move the cursor to the next line, press three times. • To switch between the different character cases Abc, abc, and ABC, press . Predictive text input—Dictionary You can enter any letter with a single key press.
order and availability of the punctuation marks depend on the language of the dictionary. To insert a number in letter mode, press and hold the desired number key. To switch between letter and number mode, press and hold . The most common punctuation marks are available under . Press and then repeatedly to search for the desired punctuation mark. Press and hold to open a list of special characters. Press repeatedly to view the matching words the dictionary has found one by one.
Messaging R1105_en.book Page 46 Friday, January 14, 2005 3:00 PM To remove the selected text from the document, press . Write and send messages The appearance of a multimedia message may vary, depending on the receiving device. 2 Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded. Tip! You can start to create a message from any application that has the option Send.
7 To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip or Note. E-mail attachments are indicated by , in the navigation bar. 8 To send the message, select Options > Send, or press . Note: Your device supports the sending of text messages beyond the normal 160-character limit. If your message exceeds 160 characters, it will be sent as a series of two or more messages and sending may cost you more.
Messaging R1105_en.book Page 48 Friday, January 14, 2005 3:00 PM Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following: • Configure an Internet access point (IAP) correctly. See ‘Connection settings’, p. 88. • Define your e-mail settings correctly. See ‘E-mail’, p. 54. You need to have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).
company information management department in a configuration message. To save the settings, select Options > Save all. Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files attached to the business card are not saved. Ringing tone—To save the ringing tone, select Options > Save. Operator logo—For the logo to be shown in the standby mode instead of the network operator’s own identification, select Options > Save.
Messaging R1105_en.book Page 50 Friday, January 14, 2005 3:00 PM Open the mailbox When you open the mailbox, you can choose whether you want to view the previously retrieved e-mail messages and e-mail headings offline or connect to the e-mail server. When you scroll to your mailbox, and press , the phone asks you if you want to Connect to mailbox? Select Yes to connect to your mailbox, and retrieve new e-mail headings or messages.
To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the phone; select Options > Retrieve. In the Attachments view, you can retrieve, open, or save attachments. You can also send attachments using a Bluetooth connection. Tip! If your mailbox uses the IMAP4 protocol, you can define how many messages to retrieve, and whether to retrieve the attachments.
Messaging R1105_en.book Page 52 Friday, January 14, 2005 3:00 PM View e-mail messages when offline When you open Mailbox the next time and you want to view and read the e-mail messages offline, answer No to the Connect to mailbox? query. You can read the previously retrieved e-mail headings, the retrieved e-mail messages, or both. You can also write new, reply to, or forward e-mail to be sent the next time you connect to the mailbox.
Message centres—Lists all the text message centres that have been defined. Msg. centre in use—Select which message centre is used for delivering text messages. Receive report (network service)—To request the network to send delivery reports on your messages. When set to No, only the Sent status is shown in Log. See ‘Log’, p. 24. Message validity—If the recipient of a message cannot be reached within the validity period, the message is removed from the text message centre.
Messaging R1105_en.book Page 54 Friday, January 14, 2005 3:00 PM Access point in use (Must be defined)—Select which access point is used as the preferred connection for the multimedia message centre. Deny report sending—Select Yes if you do not want your phone to send delivery reports of received multimedia messages. Recept. in home net.—Select whether you want the reception of the MMS messages in the home network to be Automatic, Defer retrieval, or Off.
Access point in use (Must be defined)—Choose an Internet access point (IAP) for the mailbox. See ‘Connection settings’, p. 88. My e-mail address (Must be defined)—Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address. Outgoing mail server (Must be defined)—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator.
Messaging R1105_en.book Page 56 Friday, January 14, 2005 3:00 PM Subscribed folders (not shown if the e-mail protocol is set to POP3)—You can subscribe other folders in remote mailbox as well and retrieve content from those folders. Send copy to self—Select Yes to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address. Include signature—Select Yes if you want to attach a signature to your e-mail messages. My name—Enter your own name here.
Memory in use—Choose the memory to where you want to save your messages: Phone memory or Memory card. Tip! If Memory card is selected, activate the offline profile before opening the memory card slot door or removing the memory card. When the memory card is not available, messages are saved in the phone memory. Messaging R1105_en.
Calendar R1105_en.book Page 58 Friday, January 14, 2005 3:00 PM Calendar Shortcut: Press any key ( — ) in any calendar view. A meeting entry opens, and the characters you enter are added to the Subject field. Create calendar entries 1 Press , and select Calendar > Options > New entry and from the following: Meeting—To remind you of an appointment that has a specific date and time. Memo—To write a general entry for a day. Anniversary—To remind you of birthdays or special dates.
Calendar views Tip! Select Options > Settings to change the view that is shown when you open the calendar or the starting day of the week. 1 Open an entry in which you want to set an alarm, and select Alarm > On. 2 Set the Alarm time and Alarm date. 3 Scroll down to Repeat, and press to select how often you want the alarm to be repeated. 4 Select Done. In the month view, dates that have calendar entries are marked with a small triangle at the right bottom corner.
Web R1105_en.book Page 60 Friday, January 14, 2005 3:00 PM Web Various service providers maintain pages specifically designed for mobile devices. To access these pages, press , and select Web. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML). Check the availability of services, pricing, and tariffs with your network operator or service provider.
Bookmarks view Glossary: A bookmark consists of an Internet address (mandatory), bookmark title, access point, and if the Web page requires, a user name and password. Options in the bookmarks view are Open, Download, Back to page, Bookmark manager, Mark/Unmark, Navigation options, Advanced options, Send, Find bookmark, Details, Settings, Help, and Exit. Note: Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites.
Web R1105_en.book Page 62 Friday, January 14, 2005 3:00 PM Options when browsing (depending on the page you are viewing) are Open, Accept, Remove file, Open in viewer, Open Wallet, Service options, Bookmarks, Save as bookmark, View images, Navigation options, Advanced options, Show images, Send bookmark, Find, Details, Settings, Help, and Exit. 2 Press to start to download the page.
To open a sublist of commands or actions for the currently open page, select Options > Service options. You can download items such as ringing tones, images, operator logos, themes, and video clips. Downloaded items are handled by the respective applications in your phone, for example, a downloaded image is saved in Gallery. Shortcut: Use to jump to the end of a page and to the beginning of a page.
Web R1105_en.book Page 64 Friday, January 14, 2005 3:00 PM phone, for example, a downloaded photo can be saved in Gallery. Important: Only install applications from sources that offer adequate protection against harmful software. 1 To download the item, scroll to the link, and press 2 3 4 5 6 64 . If the item is provided free, select Accept. Once downloaded, the content is automatically opened in a suitable application. To cancel the download, select Cancel.
Font size—To choose the text size. Java/ECMA script—To enable or disable the use of scripts. Default encoding—If text characters are not shown correctly, you may choose another encoding according to language. Security warnings—To hide or show security notifications. Automatic bookmarks—To disable automatic bookmark collecting, select Off. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder. Web R1105_en.
Office R1105_en.book Page 66 Friday, January 14, 2005 3:00 PM Office Calculator Converter To add, substract, multiply, divide, calculate square roots and percentages, press , and select Office > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations. To save a number in the memory (indicated by M), select Options > Memory > Save. To retrieve a number in memory, select Options > Memory > Recall. To clear a number in memory, select Options > Memory > Clear.
Set base currency and exchange rates Tip! To change the conversion order, enter the value in the second Amount field. The result is shown in the first Amount field. Before you can make currency conversions, you need to choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies. 1 Select Converter > Options > Currency rates. A list of currencies opens, and you can see the current base currency at the top.
Office R1105_en.book Page 68 Friday, January 14, 2005 3:00 PM Notes Press , and select Office > Notes to write notes. You can send notes to other compatible devices and save plain text files (TXT format) that you receive to Notes. Recorder Press , and select Office > Recorder to record telephone conversations and voice memos. If you are recording a telephone conversation, both parties hear a tone every 5 seconds during recording.
My own Go to—add shortcuts Default shortcuts: Opens Calendar Opens Inbox Opens Notes To store shortcuts (links to your favourite images, notes, bookmarks, and so on), press , and select My own > Go to. Shortcuts are added only from the individual applications, for example Gallery. Not all applications have this function. 1 Select an item from an application to which you want to add a shortcut. 2 Select Add to 'Go to'.
My own R1105_en.book Page 70 Friday, January 14, 2005 3:00 PM Options in the Wallet main view are Open, Settings, Help, and Exit. Create a wallet code Each time you open Wallet, you are prompted for a wallet code. Enter the code that you have created, and select OK. When you open Wallet for the first time, you must create your own wallet code: 1 Enter a code of your choice (4—10 alphanumeric characters), and select OK. 2 You are prompted to verify the code. Enter the same code, and select OK.
3 Press — clear characters. 4 Select Done to save. to start writing. Press to Create a wallet profile Once you have stored your personal details, you can combine them into a wallet profile. You can use a wallet profile to retrieve wallet data from different cards and categories to the browser, for example, when you are filling in a form. 1 Select the Wallet profiles category from the main wallet menu, and press . 2 Select Options > New profile. A new wallet profile form opens.
My own R1105_en.book Page 72 Friday, January 14, 2005 3:00 PM Wallet code—Change your wallet code. You are prompted to enter the current code, create a new code, and verify the new code. RFID—Set the phone ID code, type, and sending options. Automatic close—Change the automatic time-out period (1—60 minutes). After the time-out period has elapsed, the wallet code must be re-entered to gain access to the contents. Reset the wallet and wallet code This operation erases all contents of Wallet.
IM—Instant messaging (chat) Press , and select Connect. > IM. Instant messaging is a network service which allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to once you have registered to an IM service. Options in the IM main view are Open, Login/ Logout, Settings, Help, and Exit.
IM—Instant messaging (chat) R1105_en.book Page 74 Friday, January 14, 2005 3:00 PM IM presence—To allow others to see if you are online, select Active for all. Allow messages from—To allow messages from all, select All. Allow invitations from—To allow invitations only from your IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups. Msg. scrolling speed—To select the speed at which new messages are displayed.
To invite IM contacts who are online to join the IM group, select Options > Send invitation, select the contacts you want to invite, write the invitation message, and press . To prevent receiving messages from certain participants, select Options > Blocking options, and select from the following: Add to blocked list—To block messages from the currently selected participant. Add ID to list manually—To enter the user ID of the participant. Enter the ID, and press .
IM—Instant messaging (chat) R1105_en.book Page 76 Friday, January 14, 2005 3:00 PM Select recipient—To see a list of your chat contacts that are currently online. Scroll to the contact that you want to start a conversation with, and press . To create a new contact, select Options > New IM contact > Enter manually. Fill in the Nickname and User ID fields, and select Done. Glossary: The user ID is provided by the service provider to those who register to this service.
Manage IM groups Options in the IM groups view are Open, Join new group, Create new group, Leave IM group, Group, Search, Login/ Logout, Settings, Help, and Exit. Go to the IM groups view to see a list of the IM groups that you have either saved or are currently joined to. Administrate an IM group Create a new IM group Select IM groups > Options > Create new group. Enter the settings for the group.
IM—Instant messaging (chat) R1105_en.book Page 78 Friday, January 14, 2005 3:00 PM Group ID—The group ID is created automatically and cannot be changed. Add and remove group members To add members to a group, select IM groups, scroll to an IM group, and select Options > Group > Settings > Group members > Selected only or All. To remove a member from the IM group, scroll to the member, and select Options > Remove. To remove all members, select Options > Remove all.
Connectivity Bluetooth connection Bluetooth technology enables wireless connections to send images, video clips, music and sound clips, and notes, or to connect wirelessly to compatible devices with Bluetooth technology such as computers. Since devices with Bluetooth technology communicate using radio waves, your phone and the other device do not need to be in direct line-of-sight.
Connectivity R1105_en.book Page 80 Friday, January 14, 2005 3:00 PM 80 Send data using a Bluetooth connection There can be only one active Bluetooth connection at a time. 1 Open an application where the item you wish to send is stored. For example, to send an image to another compatible device, open Gallery. 2 Select the item, for example, an image, and select Options > Send > Via Bluetooth. Tip! When searching for devices, some devices may show only the unique addresses (device addresses).
Headset Other Checking the status of the Bluetooth connection • When is shown in the standby mode, a Bluetooth connection is active. • When is blinking, your phone is trying to connect to the other device. • When is shown continuously, the Bluetooth connection is active. Pair devices Tip! To define a short name (nickname or alias), scroll to the device and select Options > Assign short name in the paired devices view.
Connectivity R1105_en.book Page 82 Friday, January 14, 2005 3:00 PM received using a Bluetooth connection are indicated by . See ‘Inbox—receive messages’, p. 48. Switch off Bluetooth connectivity To switch off Bluetooth connectivity, select Bluetooth > Off. PC connections You can use your phone with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, synchronise contacts, calendar and To-do notes between your phone and a compatible PC.
Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. Sent—The amount of data, in bytes, sent from the phone. Duration—The length of time that the connection has been open. To end a connection, scroll to a connection, and select Options > Disconnect. Speed—The current speed of both sending and receiving data in kilobytes per second. To close all currently open connections, select Options > Disconnect all.
Connectivity R1105_en.book Page 84 Friday, January 14, 2005 3:00 PM Create a new synchronisation profile Options in the Sync main view are Synchronise, New sync profile, Edit sync profile, Delete, View log, Set as default, Help, and Exit. 1 If no profiles have been defined, the phone asks if you want to create a new profile. Select Yes. To create a new profile in addition to existing ones, select Options > New sync profile.
To cancel synchronisation before it finishes, press Cancel. 2 You are notified when the synchronisation is complete. After synchronisation is complete, select Options > View log to open a log file showing the synchronisation status (Complete or Incomplete) and how many calendar or contact entries have been added, updated, deleted, or discarded (not synchronised) in the phone or on the server. Server profile settings Contact your service provider for the correct settings.
Tools R1105_en.book Page 86 Friday, January 14, 2005 3:00 PM Tools Settings To change settings, press , and select Tools > Settings. Scroll to a setting group, and press to open it. Scroll to a setting you want to change, and press . Phone settings General Phone language—Changing the language of the display texts in your phone also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card.
Right selection key—To assign a shortcut to the right selection key ( ) in the standby mode, select an application from the list. You can also assign keypad shortcuts for the different presses of the scroll key, by selecting an application from the list. The scroll key shortcuts are not available if the active standby is on. Operator logo—This setting is visible only if you have received and saved an operator logo. You can choose if you want the operator logo to show or not.
Tools R1105_en.book Page 88 Friday, January 14, 2005 3:00 PM Automatic redial—Select On, and your phone makes a maximum of ten attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling press . Summary after call—Activate this setting if you want the phone to briefly display the approximate duration of the last call. Speed dialling—Select On, and the numbers assigned to the speed dialling keys ( ) can be dialled by pressing and holding the key.
Packet data connections in GSM and UMTS networks When you use your phone in GSM and UMTS networks, multiple data connections can be active at the same time, access points can share a data connection, and data connections remain active during voice calls. To check the active data connections, see ‘Connection manager’, p. 82. The following indicators may be displayed below the signal indicator, depending on which network you use: GSM network, packet data is available in the network.
Tools R1105_en.book Page 90 Friday, January 14, 2005 3:00 PM To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card. Network type—Select the Internet protocol type to use: IPv4 settings or IPv6 settings. Access point name (for packet data only)—The access point name is needed to establish a connection to the packet data and UMTS networks. You obtain the access point name from your network operator or service provider.
Access point—The access point name is needed to use your phone as a packet data modem to your computer. include the numbers from 0 to 9. See ‘Glossary of PIN and lock codes’, p. 92. Configurations Avoid using access codes similar to the emergency numbers to prevent accidental dialling of the emergency number. You may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your SIM or USIM card.
Tools R1105_en.book Page 92 Friday, January 14, 2005 3:00 PM function. To view the list of fixed dialling numbers, press , and select Tools > Settings > Security > Phone and SIM > Fixed dialling. To add new numbers to the fixed dialling list, select Options > New contact or Add from Contacts. When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection.
Wallet code—This code is required to use the wallet services. See ‘Wallet’, p. 69. Certificate management Digital certificates do not guarantee safety; they are used to verify the origin of software. In the certificate management main view, you can see a list of authority certificates that are stored in your phone. Press to see a list of personal certificates, if available. correctly in order to benefit from increased security.
Tools R1105_en.book Page 94 Friday, January 14, 2005 3:00 PM • Certificate corrupted—The certificate cannot be used. Contact the certificate issuer. Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings.
Network Your Nokia 6680 device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS network is indicated with . Network mode (shown ony if supported by the operator)— Select which network to use. If you select Dual mode, the phone uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details.
R1105_en.book Page 96 Friday, January 14, 2005 3:00 PM Tools Voice commands You can use voice commands to control your phone. You record voice commands in the same way as voice tags. See ‘Add a voice tag’, p. 28. Press , and select Tools > Voice com. Add a voice command to an application You can have only one voice command per application. 1 Select the application to which you want to add a voice command. To add a new application to the list, select Options > New application.
Application is not fully installed Application is installed on the memory card. Important: Only install applications from sources that offer adequate protection against harmful software. Before installation, do the following: To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details. To display the security certificate details of the application, select Options > View certificate. See ‘Certificate management’, p. 93.
Tools R1105_en.book Page 98 Friday, January 14, 2005 3:00 PM To see what software packages have been installed or removed and when, select Options > View log. Online certif. check—Select to check the online certificates before installing an application. To send your installation log to a help desk so that they can see what has been installed or removed, select Options > Send log > Via text message, Via multimedia, Via Bluetooth, or Via e-mail (available only if the correct e-mail settings are in place).
• To buy more usage time or extend the usage period for a media file, select an activation key, and Options > Activate content. Activation keys cannot be updated if Web service message reception is disabled. See ‘Web service messages’, p. 56. • To view which keys are not in use at the moment (Not used), press twice. Unused activation keys have no media files connected to them saved in the phone.
Troubleshooting R1105_en.book Page 100 Friday, January 14, 2005 3:00 PM Troubleshooting Q&A Q: The note Retrieving message is shown briefly. What is happening? Bluetooth connectivity A: The phone is trying to retrieve a multimedia message from the multimedia messaging centre. Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multimedia message.
not make any network connections related to multimedia messaging. select Connect. > Log > Options > Filter > All communication. Messaging Q: How do I delete my log information? Q: Why can’t I select a contact? A: Select Connect. > Log > Options > Clear log or go to Settings > Log duration > No log. These will erase the log contents, recent calls register, and message delivery reports permanently. A: The contact card does not have a phone number or an e-mail address.
Troubleshooting R1105_en.book Page 102 Friday, January 14, 2005 3:00 PM A: Open the application switching window by pressing and holding . Then scroll to the application, and press to close the application. Phone display Q: Why do missing, discoloured, or bright dots appear on the screen every time I turn on my phone? A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Battery information Charging and discharging spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery.
Care and maintenance R1105_en.book Page 104 Friday, January 14, 2005 3:00 PM 104 Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
Additional safety information Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. To maintain compliance with radio frequency exposure guidelines only use enhancements approved by Nokia for use with this device. When the device is on and being worn on the body, always use an approved holder or carrying case.
Additional safety information R1105_en.book Page 106 Friday, January 14, 2005 3:00 PM Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly.
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. WARNING! In offline profile you cannot make calls, except calls to certain emergency numbers, or use features that require network coverage.
Index R1105_en.
storing DTMF tones 23 contrast setting in camera 31, 34 copying contacts between the SIM card and device memory 27 text 45 copyright protection see activation keys cutting text 45 D data connections details 83 ending 83 date settings 91 digital rights management, DRM see activation keys DNS, domain name service, glossary explanation 90 E editing videos 37 adding effects 37 adding sound clips 37 adding transitions 37 custom video clips 37 e-mail 46 offline 52 opening 50 remote mailbox 49 retrieving from m
Index R1105_en.
centre 53 snooze alarm clock 16 calendar alarm 58 software transferring a file to your device 96 sound clips 35 sounds muting a ringing tone 22 recording sounds 68 speed dialling 21 standby mode 12 synchronisation 83 T text message 46 text message service centre adding new 53 thumbnail images in a contact card 26 time settings 91 transferring content from another phone 14 U UPIN code 92 UPUK code 92 USB cable 82 USSD commands 43 V video call 20 answering 22 rejecting 22 video clips 35 video player See R
