User Manual

reader does not support 1D codes. The Barcode reader uses
the camera in your device to scan codes.
To scan a code, select Scan code. After a valid code is detected
in the viewfinder, the decoded information appears on the
display. To scan a code that is located at some distance from
your device, deactivate the close-up mode by selecting
Options > Deactiv. close-up mode.
To save the scanned data, select Options > Save. The data
is saved in the BCR file format.
To save scanned data to Contacts, select Options > Add to
Contacts or Save business card, depending on the data you
are saving. If the data you scanned includes a mobile phone
number or an e-mail address, you can call or send a message
to the number or send an e-mail to the address by selecting
Options > Call or Options > Create message:. If the data
you scanned includes a URL link, you can open it by selecting
Options > Open link.
To view previously saved, decoded information, select Saved
data in the main view.
Security and data management
85
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black