E66 User Guide 9207000 Issue 1 Cyan Magenta Yellow Black
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-343 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/phones/declaration_of_conformity/. © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Eseries, E66, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors. The availability of particular products and applications and services for these products may vary by region.
Contents Safety...........................................................7 About your device...........................................................7 Network services.............................................................8 Battery removing............................................................8 E66 in brief...................................................9 Key features.....................................................................9 Keys and parts....................................
Connect PC to web.........................................................44 Messaging..................................................45 Messaging folders.........................................................45 E-mail messages............................................................46 Write and send text messages....................................48 Multimedia messages...................................................49 Instant messaging........................................................
Enhancements............................................93 Battery and charger information...............94 Battery and charger information................................94 Nokia battery authentication guidelines...................95 Care and maintenance...............................97 Disposal..........................................................................98 Additional safety information...................99 Small children................................................................
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS Follow any restrictions.
and other security software on your device and any connected computer. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.
E66 in brief Model number: Nokia E66-1 (RM-343). Hereinafter referred to as Nokia E66. Access your e-mail while on the move. Key features Stay up-to-date and plan your meetings with Calendar. Your new Eseries device helps you manage your business and personal information in and out of office. Some of the key features are highlighted here: Switch from business to personal mode. Browse the internet, find blogs and receive news feeds with Web. Listen to music with Music player.
Keys and parts 10 1 — Power key 2 — Earpiece 3 — Light sensor 4 — Selection key. Press the selection key to perform the function shown above it on the display. 5 — Call key 6 — Press the key for a few seconds to switch on Bluetooth connectivity. When writing text, press the key and select More symbols to access special characters. 7 — Microphone 8 — Camera (video calls only) 9 — Navi™ scroll key, hereafter referred to as the scroll key.
3 — Volume down key 4 — Capture key 5 — Release button 6 — Headset connector 7 — Micro-USB port 8 — Infrared port accordingly and changes to full screen. To display the control and status panes, press either selection key. The image changes to full screen in RealPlayer, browser, and image viewer. To turn off the automatic display rotation or changing to full screen, select Menu > Tools > Settings > General > Personalisation > Display > Display rotation or Turn to full view.
Scroll key lights When you receive a message or miss a call, the scroll key starts blinking to indicate the event. When the display light turns off, the scroll key starts blinking slowly. To set the length of time for blinking for missed events or to select of which events you want to be notified, select Menu > Tools > Settings > General > Personalisation > Notification light. To change the slide settings, select Menu > Tools > Settings > General > Slide handling.
Set up your device Set up your E66 following these instructions. Insert the SIM card and battery 1. With the back of the device facing you, press the release buttons (1) and slide the back cover off (2). 3. Insert the SIM card. Make sure that the contact area on the card is facing the connectors on the device and that the bevelled corner is facing the top of the device. 2. If the battery is inserted, lift the battery in the direction of the arrow to remove it. 4. Insert the battery.
5. Slide the back cover back to place. 3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet. Your battery has been precharged at the factory, but the charging levels may vary. To reach the full operation time, charge the battery until it has been fully charged according to the battery level indicator. Tip: If you have old compatible Nokia chargers, you can use them with the Nokia E66 by attaching the CA-44 charger adapter to the old charger.
Connect the headset Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Connect the compatible headset to the headset connector of your device. 3. Push the card in until it locks into place. 4. Close the back cover. Eject the memory card Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
Get started After you have set up your device, switch it on and start to explore what is new in Eseries. First start-up 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter the code, and select OK. 3. When prompted, enter the country in which you are located and the current date and time. To find your country, enter the first letters of the country name.
You can define two separate home screens for different purposes, such as one screen to show your business email and notifications, and another to show your personal e-mail. This way, you do not have to see business-related messages outside office hours. card and to check the amount of free memory, select Options > Memory details. Menu To rearrange the folder, scroll to the application you want to move, and select Options > Move. A check mark is placed beside the application.
time depends on the amount of data to be transferred. You can also cancel and continue later. The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transfer earlier. The items that you can transfer vary depending on the other device. If an application consists of several tabs (see figure), open a tab by scrolling right or left. Transfer content between devices To save a file, select Options > Save.
To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side of the object. Display indicators The device is being used in a UMTS network (network service). The battery charge level. The higher the bar, the stronger the charge in the battery. You have one or more unread messages in the Inbox folder in Messaging. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder in Messaging.
You have set the device to scan for WLANs, and a WLAN is available. A WLAN connection is active in a network that does not have encryption. A WLAN connection is active in a network that has encryption. Your device is connected to a computer with a USB data cable. The second phone line is being used (network service). All calls are forwarded to another number. If you have two phone lines, a number indicates the active line. A headset is connected to the device.
Tip: To ensure that you have adequate memory, transfer data regularly to a memory card or computer, or use File manager to delete files you no longer need. After you install applications to a compatible memory card, installation files (.sis, .sisx) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files.
Traditional text input is shown on the top right of the display when you are writing text using traditional text input. and indicate the selected case. indicates that the first letter of the sentence is written in uppercase and all the other letters are automatically indicates the number written in lowercase. mode. To write text with the keypad, press a number key 2-9 repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.
Change the writing language When you are writing text, you can change the writing language. For example, if you press the 6 key repeatedly to reach a specific character, changing the writing language gives you access to characters in a different order. If you are writing text using a non-Latin alphabet and want to write Latin characters, for example e-mail or web addresses, you may need to change the writing language.
New from Eseries Your new Eseries device contains new versions of the Calendar and Contacts applications, as well as a new home screen. Access tasks quickly Whenever you see the icon on the home screen, or in the Contacts or Calendar applications, scroll right to access a list of available actions. To close the list, scroll left. When you navigate in these applications, to go back to the previous level, scroll left.
To set off the contact search, select Options > Contact search off. To check your received messages, scroll to the message box in the notification area. To read a message, scroll to it and press the scroll key. To access other tasks, scroll right. To view your missed calls, scroll to the calls box in the notification area. To return a call, scroll to a call and press the call key. To send a text message to a caller, scroll to a call, scroll right and select Send text msg. from the list of available actions.
To create a new meeting entry, press the calendar key for a few seconds. E-mail key To open your default mailbox, press the e-mail key briefly. To create a new e-mail message, press the e-mail key for a few seconds. Nokia Calendar for Eseries Select Menu > Office > Calendar. Create and view scheduled events and appointments, and switch between different calendar views.
• Memo entries are related to the whole day but not to a specific time of the day. • Anniversary entries remind you of birthdays and special dates. They refer to a certain day but not a specific time of the day. Anniversary entries are repeated every year. • To-do entries remind you of a task that has a due date but not a specific time of the day. To create a calendar entry, scroll to a date, select Options > New entry and the entry type. Tip: To create a meeting entry, start entering the subject.
information (business cards) to or receive it from compatible devices. Whenever you see the icon, scroll right to access a list of available actions. To close the list, scroll left. Add contacts Select Options > New contact, and enter the contact's information. To copy a contact's information from the memory card, select Options > Copy > From memory card. Contact groups If you want to make conference calls to the group, define also the following: • Conf.
To select which contacts directory opens when you open the Calendar application, select Default contact list. Multitasking You can have several applications open at the same time. To switch between active applications, press and hold the home key, scroll to an application, and press the scroll key. To close the selected application, press the backspace key. Example: When you have an active phone call and want to check your calendar, press the home key to access the menu, and open the Calendar application.
Personalisation You can personalise your device by adjusting the various tones, background images, and screen savers, for example. Profiles Select Menu > Tools > Profiles. You can adjust and customise the ringing tones, alert tones, and other device tones for different events, environments, or caller groups. The profile currently in use is shown at the top of the display on the home screen. However, if the active profile is General, only today's date is shown.
Personalise the home screen Select Menu > Tools > Modes. To change the background image of the home screen, select the Wallpaper folder. To select an image or write a text for the screen saver, select the Power saver folder. To change the name of the current home screen, select Mode name. To select which applications and notifications you want to see on the home screen, select Home screen applications. To change the theme of the home screen currently in use, select Theme.
Media Your device contains a variety of media applications for both business and leisure time use. Camera Select the scene. Select the flash mode (images only). Activate the self-timer (images only). Select Menu > Media > Camera. Capture an image Your device supports an image capture resolution of up to 2048 x 1536 pixels. The image resolution in this guide may appear different. To capture an image, use the display as a viewfinder and press the scroll key. The device saves the image in Gallery.
length of the video clip depends on the available memory. Nokia Podcasting Select Menu > Media > Podcasting. Download podcasts to your device and listen them. Play and manage podcasts Podcasting delivers audio or video content over the internet for playback on mobile devices and PCs. With the Nokia Podcasting application, you can search, discover, subscribe, and download podcasts over the air; and play, manage, and share podcasts with your device.
loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Music player. Music player supports files formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music player does not necessarily support all features of a file format or all the variations of file formats. You can also use Music player to listen to podcast episodes. Podcasting is a method for delivering audio or video content over the internet using either RSS or Atom technologies for playback on mobile devices and PCs.
To find more music in the different categories, select Options > Find in Music store. Share images online Transfer music from PC Recorder To select the access point to use with the Music Store, select Default acc. pt.. To transfer music from your PC, connect your device to the PC with a compatible USB data cable or Bluetooth connectivity. If you are using the USB cable, select Mass storage as the connection mode. Make sure that a compatible memory card is inserted in the device.
To create a new folder, select a file and then select Options > Organise > New folder. You cannot create folders within folders. To copy or move files, select a file and Options > Organise > Move to folder, New folder, Move to memory card, Copy to memory card, Copy to phone mem., or Move to phone mem.. select Left to rotate the image counterclockwise by 90 degrees. RealPlayer To download files into Gallery using the browser, select Downl. graphics, Downld. videos, Downld. tracks, or Downld. sounds.
site and buffer the content. If a network connection problem causes a playback error, RealPlayer attempts automatically to reconnect to the internet access point. To adjust the volume during playback, use the volume keys. To fast-forward during playback, scroll up and hold. To rewind during play, scroll down and hold. To stop the playback or streaming, select Stop. Buffering or connecting to the streaming site stops, the playback of the clip stops, and the clip rewinds to the beginning.
To return to the home screen and leave the FM radio playing in the background, select Options > Play in background. View visual content To check availability and costs, and to subscribe to the service, contact your service provider. Before you can view visual content, you must have an internet access point defined at Menu > Tools > Settings > Connection > Access points. 1. To view available visual content for a tuned station, select Options > Start visual service.
Internet With your new Eseries device you can browse both the internet and your company's intranet, and download and install new applications to your device. You can also use your device as a modem and connect your PC to the internet. Web Select Menu > Web. To browse the web (network service), you need to configure the internet access point settings. If you are using a GPRS connection, your wireless network must support GPRS, and the service must be activated for your SIM card.
open a page, scroll to its address, and press the scroll key. To move on a web page, use the scroll key, which is shown as a pointer on the page. When you move the pointer over a link, the pointer changes into a hand. Press the scroll key to open the link. On a web page, new links usually appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them. The addresses of the pages you visit are saved in the Auto. bookmarks folder.
To browse your company's intranet, you must create a company-specific VPN policy. Select Menu > Tools > Settings > Connection > VPN. To connect to the intranet, open the Intranet application, select the connection method and Options > Connect. To define which VPN profile to use in the connection, select Options > Use other VPN policy. To define the settings for the intranet connection, select Options > Settings. Download! 42 Select Menu > Download!.
from the list and then Options > Duplicate access point to use the access point as a basis for the new one. 3. Define the following settings. • Connection name — Enter a descriptive name for the connection. • Data bearer — Select Packet data. • Access point name — Enter the name for the access point. The name is usually provided by your service provider. • User name — Enter your user name if required by the service provider. User names are often case-sensitive and provided by your service provider.
additional settings. See the device help for more information. • WLAN security settings — Edit the security settings for the selected security mode. • Homepage — Enter the web address of the page you want to display as the home page when you use this access point. To set up a WLAN access point automatically, use the WLAN wizard. Select Menu > Connectivity > WLAN wiz.. Connect PC to web You can use your device to connect your PC to the web. 1.
Messaging Select Menu > Communic. > Messaging. In Messaging (network service), you can send and receive text messages, multimedia messages, audio messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in the service area of a cellular network.
Settings > Text message or Multimedia message > Receive report. The reports are saved in the Reports folder. Select Menu > Messaging > Mailbox. To receive and send e-mail, you must have a remote mailbox service. This service may be offered by an internet service provider, a network service provider, or your company. Your device is compliant with internet standards SMTP, IMAP4 (revision 1), and POP3, and with different vendor-specific e-mail solutions.
your e-mail, you must first connect to the remote mailbox; then select the e-mail messages you wish to retrieve into your device. 1. To retrieve received e-mail messages to your device and view them, select your mailbox in the Messaging main view. When the device asks Connect to mailbox?, select Yes. 2. Enter your user name and password, if prompted. 3.
2. Select Options > Add recipient to select the recipients' e-mail addresses from Contacts, or enter the e-mail addresses in the To field. Use a semicolon to separate entries. Use the Cc field to send a copy to other recipients, or the Bcc field to send a blind copy to recipients. 3. In the Subject field, enter the subject of the e-mail. 4. Enter your e-mail message in the text area, and select Options > Send.
Multimedia messages Select Menu > Communic. > Messaging. Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. A multimedia message (MMS) can contain text and objects such as images, sound clips, or video clips. Before you can send or receive multimedia messages on your device, you must define the multimedia message settings.
Service providers may differ in their support of features. If IM is not available from your service provider, it may not appear in the menu of your device. Contact your service provider for more information about signing up for IM services, costs of services, and IM settings. You may receive the settings in a special text message from the service provider. Messaging settings Select Menu > Communic. > Messaging > Options > Settings. Fill in all fields marked with Must be defined or with a red asterisk.
• MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that may not be supported by the network or the receiving device. To receive warnings about including such content, select Guided. To create a multimedia message with no restrictions on attachment type, select Free. If you select Restricted, creating multimedia presentations is not possible. • Access point in use — Select the default access point to connect to the multimedia message centre.
• My name — Enter a name to appear before your email address when you send e-mail. • Reply-to — Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address to which you want to direct the replies. You can only enter one address to which replies are directed. • Delete e-mails from — Select whether you want to delete the e-mail messages only from the device or from both the device and the server.
Other settings Select Menu > Communic. > Messaging > Options > Settings > Other. Select from the following: • Save sent messages — Select whether to store sent messages in the Sent folder. • Number of saved msgs. — Enter the number of sent messages to save. When the limit is reached, the oldest message is deleted. • Memory in use — Select where to save your messages. You can save messages to the memory card only if a memory card is inserted.
Phone To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in the service area of a cellular network. To make or receive a net call, your device must be connected to a net call service. To connect to a net call service, your device must be in the coverage of a connection network, such as a WLAN access point.
to the name, and press the call key. See "Nokia Contacts for Eseries", p. 28. To make a call using the log, press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and press the call key. See "Log", p. 60. Video calls To adjust the volume of an active call, use the volume keys. To switch from a voice call to a video call, select Options > Switch to video call. The device ends the voice call and makes a video call to the recipient.
loudspeaker and use the earpiece, select Options > Activate handset. To swap the places of images, select Options > Change image order. To zoom the image on the display, select Options > Zoom in or Zoom out. To end the video call and make a new voice call to the same recipient, select Options > Switch to voice call. Share a video 56 Use Video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call.
be established between computers, between mobile phones, and between a VoIP device and a traditional telephone. To make or receive a net call, your device must be within WLAN coverage, for example. The availability of the net call service may vary according to your country or area. Create a net call profile Before you can make net calls, you need to create a net call profile. 1. Select Menu > Tools > Settings > Connection > SIP settings > Options > New SIP profile, and enter the required information.
Make net calls You can make a net call from all applications where you can make a regular voice call. For example in Contacts, scroll to the desired contact, and select Call > Internet call. To make a net call in the home screen, enter the SIP address, and press the call key. To set net call as the preferred call type for outgoing calls, select Menu > Communic. > Internet tel. > Options > Settings > Default call type > Internet call.
To hear information on your missed and received calls, dialled numbers, and frequent calls, select Recent calls. To listen to your voice messages, select Voice mailbox. To dial a telephone number, select Dialler. To use voice commands to make a phone call, select Voice commands. To have your received messages read aloud, select Message reader. To hear the current time, select Clock > Time. To hear the current date, select Clock > Date.
Push to talk (PTT) (network service) provides direct voice communication connected with the push of a key. With PTT, you can use your device as a walkie-talkie: one person talks while the others listen through the built-in loudspeaker. Users take turns responding to each other. Because only one user can talk at a time, the maximum duration of a speech turn is limited. For details of the speech turn duration, contact your service provider.
Travelling Need directions? Looking for a restaurant? Your Eseries device has the tools to get you where you want to be. About GPS and satellite signals The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. Your device has an internal GPS receiver. A GPS terminal receives low-power radio signals from the satellites and measures the travel time of the signals.
• If the weather conditions are bad, the signal strength may be affected. • Establishing a GPS connection may take from a couple of seconds to several minutes. Satellite status To check how many satellites your device has found, and whether your device is receiving satellite signals, select Menu > GPS > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal.
About Maps To connect to the internet automatically when you start Maps, select Options > Tools > Settings > Internet > Go online at start-up > Always on. To prevent automatic downloading of maps, select Options > Tools > Settings > Internet > Go online at start-up > Never. To set the device to ask your permission before connecting to the internet, select Options > Tools > Settings > Internet > Go online at start-up > Always ask.
Initially, your device must receive signals from at least four satellites to calculate the coordinates of your location. After the initial calculation, signals from three satellites may be enough. shows the The data transfer indicator internet connection used and the amount of data transferred since the application started. Find locations To find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and press the scroll key.
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals. Use GPS data To check the signal strength of the satellites that provide the positioning information necessary for navigation, open any of the three views and select Options > Satellite status. To set a landmark or location as the destination of your trip, select Navigation > Options > Set destination.
Nokia Office Tools Nokia Office Tools support mobile business and enable effective communication with work teams. Active notes Select Menu > Office > Active notes. Active notes allows you to create, edit, and view different kinds of notes, for example, meeting memos, hobby notes, or shopping lists. You can insert images, videos, and sound in the notes. You can link notes to other applications, such as Contacts, and send notes to others. To create a note, start writing.
To save the numbers or results of a calculation, select Options > Memory > Save. To retrieve the results of a calculation from the memory and use them in a calculation, select Options > Memory > Recall. File manager Select Menu > Office > File mgr.. With File manager, you can manage the contents and properties of files and folders on your device memory and memory card. You can open, create, move, copy, rename, send, and search for files and folders. Copyright protection may prevent sending some files.
Convert measurements 1. Scroll to the Type field, and select Options > Conversion type to open a list of measures. Select the measure to use, and select OK. 2. Scroll to the first Unit field, and select Options > Select unit. Select the unit from which to convert, and select OK. Scroll to the next Unit field, and select the unit to which to convert. 3. Scroll to the first Amount field, and enter the value to convert. The other Amount field changes automatically to show the converted value.
To configure a printer for your device, select Menu > Office > Printers > Options > Add. To set the printer as the default printer, select Options > Printing options > Printers, scroll to the printer and select Options > Set as default. Before you print, make sure your device is properly connected to the printer. To print a document, select Options > Printing options > Print. To print to a file, select Options > Printing options > Print > Print to file, and determine the location for the file.
Notes Select Menu > Office > Notes. You can create and send notes to other compatible devices, and save received plain text files (.txt format) to Notes. To write a note, start entering the text. The note editor opens automatically. To open a note, scroll to it, and press the scroll key. To send a note to other compatible devices, select Options > Send. To synchronise or to define synchronisation settings for a note, select Options > Synchronisation.
Connectivity Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer. Data cable Fast downloading Transfer data between your device and a PC High-speed downlink packet access (HSDPA, also called 3.5G, indicated by ) is a network service in UMTS networks and provides high-speed data downloads.
To change the USB mode you normally use with the data cable, select Menu > Connectivity > USB > USB connection mode and the desired option. To set the device to ask for the mode each time you connect the USB data cable to the device, select Menu > Connectivity > USB > USB connection mode > Ask on connection > Yes. Bluetooth Select Menu > Connectivity > Bluetooth. About Bluetooth 72 Bluetooth technology enables wireless connections between electronic devices within a range of 10 metres (33 feet).
When the connection has been established, Sending data is shown. The Sent folder in the Messaging application does not store messages sent using Bluetooth connectivity. To receive data using Bluetooth, select Bluetooth > On and My phone's visibility > Shown to all to receive data from a non-paired device or Hidden to receive data from a paired device only. When you receive data through Bluetooth, a tone sounds, and you are asked if you want to accept the message in which the data is included.
or devices that belong to someone you trust. If you want to accept connection requests from the other device separately every time, select Set as unauthorised. To use a Bluetooth audio enhancement such as a Bluetooth handsfree or headset, you need to pair your device with the enhancement. See the enhancement user guide for the passcode and further instructions. To connect to the audio enhancement, switch on the enhancement. Some audio enhancements connect automatically to your device.
device to a WLAN router, enter *#62209526# on the device keypad. The MAC address is shown on the device display. See WLAN availability To have your device show WLAN availability, select Menu > Tools > Settings > Connection > Wireless LAN > Show WLAN availability. If WLAN is available, is shown on the display. Tip: You can also scan for networks in range. WLAN wizard Select Menu > Connectivity > WLAN wiz.. The WLAN wizard helps you find and connect to a wireless LAN.
WLAN. The access point can also be used with other applications requiring WLAN connection. If you select a secured WLAN, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct service set identifier (SSID). To use the found WLAN for a net call connection, scroll to the row showing the status, and press the scroll key. Select Use for, the desired net call service, and the WLAN to be used. Modem Select Menu > Connectivity > Modem.
Search for WLAN To search for WLANs available within range, select Available WLAN networks. The available WLANs are listed with their network mode (infrastructure or adhoc), signal strength, and network encryption indicators, and whether your device has an active connection with the network. To view the details of a network, scroll to it, and press the scroll key. To create an internet access point for a network, select Options > Define access point.
Security and data management Manage the data and software on your device, and take care of the security of the device and its contents. Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning. Lock the device Important: If the device has been locked, enter the lock code to activate the phone function.
To remove the memory card password, select Options > Remove password. When you remove the password, the data on the memory card is not protected against unauthorised use. To open a locked memory card, select Options > Unlock memory card. Enter the password. If you cannot recall the password to unlock a locked memory card, you may reformat the card, in which case the card is unlocked and password removed. Formatting a memory card destroys all data stored on the card.
cards support the fixed dialling service. Contact your service provider for more information. When fixed dialling is activated, calls may be possible to the official emergency number programmed into your device. 1. To restrict calls from your device, select Options > New SIM contact and enter the contact name and phone number to the list of numbers to which calls are allowed, or select Add from Contacts to copy the contact from Contacts.
• Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Certificate trust settings Trusting a certificate means that you authorise it to verify web pages, e-mail servers, software packages, and other data. Only trusted certificates can be used to verify services and software.
• Java ME™ applications compatible with the Symbian operating system. The Java application installation file extensions are .jad or .jar. Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or with Bluetooth. During the installation, the device checks the integrity of the package to be installed.
SyncML technology for remote synchronisation. For information on SyncML compatibility, contact the supplier of the applications with which you want to synchronise your device. You may receive the synchronisation settings as a message from your service provider. The available applications you can synchronise may vary. Contact your service provider for more information. Create a synchronisation profile There is a Nokia PC Suite synchronisation profile available in your device.
these services. VPN access points pair VPN policies with regular internet access points to create secure connections. Your service provider may preset some or all access points for your device, and you may not be able to create, edit, or remove them. Contact your company's IT department for the correct settings. Open a destination, select a VPN access point, select Edit, and define the following: • Connection name — Enter a name for the VPN access point.
Settings Select Menu > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a special message by your service provider. You may not be able to change such settings. Select the setting you want to edit to do the following: • Switch between two values, such as on or off. • Select a value from a list.
To change the home screen mode settings, select Home screen > Mode settings. To set the warning tones on or off, select Tones > Warning tones. To select whether to show or hide the operator logo, select Home screen > Operator logo > On or Off. To select whether you want the alarms and incoming calls to be silenced when you tap the device twice, select Tap to silence. To assign shortcuts for the device keys, select Home screen > Key shortcuts. These shortcuts are not available in the home screen.
To restore the preset applications and tasks, select Restore defaults. Date and time settings Select Menu > Tools > Settings > General > Date and time. To select whether you want to answer a call by opening the slide, select Opening the slide. To select whether you want to end a call by closing the slide, select Closing the slide. To select whether you want to lock the keypad when you close the slide, select Keyguard activation. To set the current date and time, select Date and Time.
Security settings Select Menu > Tools > Settings > General > Security. Avoid using codes that are similar to emergency numbers to prevent accidental dialling of the emergency number. Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice. Device and SIM card security To change the PIN code, select Phone and SIM card > PIN code. The new code must be 4 to 8 digits long.
To select whether net calls alert or not, select Call > Internet call alert. You are notified of missed net calls with a notification. To set the default call type, select Call > Default call type and select Voice call if you make a GSM calls, or Internet call if you make net calls. To send a text message automatically to the person who is calling you informing why you cannot answer the incoming call, select Call > Reject call with SMS > Yes. To set the text for the message, select Call > Message text.
device in GSM and UMTS networks, it is possible to have multiple data connections active at the same time; access points can share a data connection, and data connections remain active, for example, during voice calls. See "Connection manager", p. 76.
• Service profile — Select IETF or Nokia 3GPP. • Default access point — Select the access point to use for the internet connection. • Public user name — Enter your user name received from your service provider. • Use compression — Select if compression is used. • Registration — Select the registration mode. • Use security — Select if security negotiation is used. • Proxy server — Enter the proxy server settings for this SIP profile.
Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. General shortcuts General shortcuts Power key Press and hold to switch your device on and off. Press once to switch between profiles. Home screen 92 Left selection key + * Lock and unlock the keypad. Call key Open the call log. 0 Press and hold to open your home page in the Web browser. # Press and hold to switch between the Silent and General profiles.
Enhancements Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Battery and charger information Battery and charger information 94 Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-4F. This device is intended for use when supplied with power from the following chargers: AC-5. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Improper battery use may result in a fire, explosion, or other hazard.
poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device. To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimetres (7/8 inch) away from the body.
• Not carry the wireless device in a breast pocket. • Hold the wireless device to the ear opposite the medical device to minimise the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.
standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1.37 W/kg.
Index A access points creating 89 VPN 83 Active notes 66 alarm clock 69 alert tones 86 altitude calibration 65 animated screen saver 32 antennas 15 application settings 91 applications common actions 19 installing 82 attachments e-mail 47 autolock period 88 B background image 32 backing up data 81 barcodes 84 battery charge level 20 charging 14 inserting 13 Bluetooth authorising devices 73 pairing 73 passcode 73 receiving data 72 security 74 sending data 72 bookmarks 41 browsing intranet 41 offline 41 w
GPRS settings 42 PC connection 44 WLAN settings 43 connectors 10 contact groups adding ringing tones 29 creating 29 making conference calls 29 contacts adding 29 adding ringing tones 29 searching 29 settings 29 contacts directories managing 29 contacts key 26 converting currencies 68 measurements 68 currency conversions 68 D 104 date settings 87 decrypting device memory and memory card 79 destination removing 65 setting 65 display changing the look 32 indicators 20 settings 85 display rotation 11 settin
SIM card 13 installation log 82 installing applications 82 Instant messaging 49 internet 40 ending connections 41 internet calls 58 intranet browsing 41 J jad files 82 jar files 82 Java applications K keyguard 12 keypad lock settings 88 locking 12 tones 86 keys 10 shortcuts 85 L landmarks creating 65 language changing 24 settings 86 lock code 78, 88 locking device 78 82 device autolock 88 keypad 12, 88 Log 60 adding numbers to Contacts 60 deleting 60 logos operator logo 85 welcome logo 85 M mailbo
O One-touch keys 86 operator logo 85 selecting 89 original settings 88 P 106 packet data access point settings 42 restricting 91 settings 89 pairing devices 73 passcode 73 passwords memory card password 22, 67 PDF reader 68 personalisation 32 changing language 86 display 85 home screen 85 tones 86 PIN code changing 88 playing video and audio 37 podcasting 34 searching 34 positioning settings 62 predictive text input 23, 86 printing 68 profiles creating 31 customising 31 net call profile 57, 91 selectin
network 89 packet data 89 positioning 62 restoring 88 SIP 90 slide 87 text messages 50 time 87 tones 86 Web 41 WLAN 90 WLAN access point 43 WLAN security 90 shortcuts 92 keys 85 signal strength 20 silencing alarms and incoming calls 86 SIM card inserting 13 SIP creating profiles 90 editing profiles 90 settings 90 sis files 82 sisx files 82 slide opening and closing 12 settings 87 software packages installing 82 sound clips 36 speed dialling 58 standby mode settings 85 switching device on and off 17 Symbian
access points 75 availability 75 MAC address 74, 90 searching for networks security settings 90 settings 90 WLAN wizard 75 writing language 24 Z Zip manager 77 68 108 Cyan Magenta Yellow Black
