Your device offers several options to connect to the internet or to another compatible device or PC. Wireless LAN Your device supports wireless local area network (WLAN). With WLAN, you can connect your device to the internet and compatible devices that have WLAN. About WLAN To use WLAN, it must be available in the location, and your device must be connected to the WLAN. Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.
Connections WLAN access point device at a time, but several applications can use the same internet access point. When the device is in the offline profile, you can still use WLAN (if available). Remember to comply with any applicable safety requirements when establishing and using a WLAN connection. Tip: To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode.
You can also use connection manager to create internet access points. See "Active data connections", p. 103. Operating modes There are two operating modes in WLAN: infrastructure and ad hoc. The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a WLAN access point device, or wireless devices are connected to a wired LAN through a WLAN access point device.
Connections Bluetooth connectivity About Bluetooth connectivity You can make a wireless connection to other compatible devices with Bluetooth connectivity. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits.
Security tips Press , and select Tools > Bluetooth. When you are not using Bluetooth connectivity, to control who can find your device and connect to it, select Bluetooth > Off or My phone's visibility > Hidden. Do not pair with or accept connection requests from an unknown device. This protects your device from harmful content. Send data using Bluetooth connectivity Several Bluetooth connections can be active at a time.
Connections of your device, enter *#2820# in the standby mode. Pair devices To pair with compatible devices and view your paired devices, in the main view of Bluetooth connectivity, scroll right. Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. 1. To pair with a device, select Options > New paired device.
Press , and select Tools > Bluetooth. To block a device from establishing a Bluetooth connection to your device, scroll right to open Paired devices. Select a device you want to block and Options > Block. To unblock a device, scroll right to Blocked devices, select a device, and Options > Delete. To unblock all blocked devices, select Options > Delete all. If you reject a pairing request from another device, you are asked if you want to block all future connection requests from this device.
Connections select USB connection mode and from the following: ● PC Suite — Use Nokia PC applications such as Nokia Nseries PC suite, and Nokia Software Updater. ● Mass storage — Transfer data between your device and a compatible PC. Use this mode also for downloading maps with the Nokia Map Loader PC application. ● Image transfer — Print images on a compatible printer. ● Media transfer — Synchronise music with Windows Media Player.
RealPlayer With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first. RealPlayer supports files with extensions such as . 3gp, .mp4, or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. Play video clips Press , and select Applications > Media > RealPlayer. To play a saved media file, select Video clips, a clip, and Play.
Media folder the site and starts loading the content. The content is not saved in your device. RealPlayer settings Press , and select Applications > Media > Flash Player. Press , and select Applications > Media > RealPlayer. Use Adobe Flash Player to view, play, and interact with compatible flash files made for mobile devices. Select Options > Settings and from the following: Licences You may receive RealPlayer settings in a special message from the service provider.
If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia Nseries PC Suite. Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM-protected content after the device memory is formatted. You may also need to restore the activation keys in case the files on your device get corrupted.
Messaging Messaging Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging main view Press , and select Messaging (network service). To create a new message, select New message. Messaging contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. ● My folders — Organise your messages into folders.
Write text Your device supports traditional text input and predictive text input. With predictive text, you can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. When you write text, is displayed when you write text using traditional text input and when using predictive text input. Traditional text input Press a number key (1–9) repeatedly until the desired character appears.
Messaging 4. Start writing the next word. Tips on text input To insert a number in the letter mode, press and hold the desired number key. After changing the writing language, for example, if you press 6 repeatedly to reach a specific character, changing the writing language gives you access to characters in a different order. To delete a character, press C. To delete more than one character, press and hold C. Edit text and lists To switch between the different character modes, press #.
Check the size limit of email messages with your service provider. If you attempt to send an e-mail message that exceeds the size limit of the e-mail server, the message is left in the Outbox folder, and the device attempts to resend it periodically. Sending an e-mail requires a data connection, and continuous attempts to resend the e-mail may increase your phone bill. In the Outbox folder, you can delete such a message or move it to the Drafts folder. 1.
Messaging indicate whether the message is received at the intended destination. For more details about messaging services, contact your service provider. Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly.
Data, settings, and web service messages Your device can receive many kinds of messages that contain data, such as business cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You may also receive settings from your service provider or company information management department in a configuration message. To save the data from the message, select Options and the corresponding option.
Messaging You must have a separate e-mail account. Follow the instructions given by your remote mailbox and internet service provider (ISP). If you select New mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. When you create a new mailbox, the name you give to the mailbox replaces New mailbox in the Messaging main view. You can have up to six mailboxes.
To retrieve e-mail messages automatically, select Options > E-mail settings > Automatic retrieval. See "Automatic retrieval settings", p. 123. Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Delete e-mail messages Press , and select Messaging and a mailbox.
Messaging settings manually, fill in all fields marked with Must be defined or an asterisk. Some or all message centres or access points may be preset for your device by your service provider, and you may not be able to change, create, edit, or remove them. Text message settings Press , and select Messaging > Options > Settings > Text message. Select from the following: 120 ● Message centers — View a list of all text message centres that have been defined.
Outside your home cellular network, sending and receiving multimedia messages may cost you more. If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home cellular network. ● Allow anonymous msgs. — Select whether you want to reject messages from an anonymous sender. ● Receive ads — Define whether you want to receive multimedia message advertisements.
Messaging ● Password — Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox. ● Incoming mail server — Enter the IP address or host name of the mail server that receives your e-mail. ● Access point in use — Select an internet access point (IAP). See "Access points", p. 160. ● Mailbox name — Enter a name for the mailbox. ● Mailbox type — Defines the e-mail protocol that your remote mailbox service provider recommends.
Press , and select Messaging > Options > Settings > E-mail > Mailboxes, a mailbox, and Retrieval settings. Select from the following: ● E-mail retrieval — Define which parts of the email are retrieved: Headers only, Size limit (POP3), or Msgs. & attachs. (POP3). ● Retrieval amount — Define how many new email messages are retrieved to the mailbox. ● IMAP4 folder path (for IMAP4 only) — Define the folder path for folders to be subscribed.
Messaging ● Reception — Select whether you want to receive cell broadcast messages. ● Language — Select the languages in which you want to receive messages: All, Selected, or Other. ● Topic detection — Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list. Other settings Press , and select Messaging > Options > Settings > Other.
Voice calls 1. In the standby mode, enter the phone number, including the area code. To remove a number, press C. For international calls, press * twice for the + character (which replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. The character + as a replacement for the international access code may not work in all regions. In this case, enter the international access code directly. 2.
Make calls Tip: When you have only one active voice call, to put the call on hold, press the call key. To activate the call, press the call key again. During an active call, to route the sound from the handset to the loudspeaker, select Options > Activate loudspeaker. If you have attached a compatible headset with Bluetooth connectivity, to route the sound to the headset, select Options > Activate handsfree. To switch back to the handset, select Options > Activate handset.
To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select Options > Conference to return to the conference call. To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4.
Make calls the device adapts to the main user’s voice to recognise the voice commands better. The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesised voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
Options during a video call 1. To start a video call, enter the phone number in the standby mode, or select Addr. Book and a contact. To use the main camera to send video, select Options > Use main camera. To switch back to the secondary camera, select Options > Use secondary camera. Even if you denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. 2. Select Options > Call > Video call.
Make calls Answer or decline a video call When a video call arrives, is displayed. To answer the video call, press the call key. Allow video image to be sent to caller? is displayed. To start sending live video image, select Yes. If you do not activate the video call, video sending is not activated, and you only hear the sound of the caller. A grey screen replaces the video image.
To set up your UMTS connection, do the following: Person-to-person connection settings ● Ensure that your device UMTS access point connection settings are configured properly. To set up video sharing, you need person-to-person and UMTS connection settings. A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use video sharing.
Make calls number of the recipient including the country code, and select OK to send the invitation. Sharing begins automatically when the recipient accepts the invitation. Options during video sharing to zoom the video (available for sender only) to adjust the brightness (available for sender only) or or to mute or unmute the microphone to switch the loudspeaker on and off to switch to full screen mode (available for receiver only) 3. To end the sharing session, select Stop.
Packet data To monitor the phone numbers of missed, received, and dialled voice calls, select Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. To check the amount of data sent and received during packet data connections, select Data counter. For example, you may be charged for your packet data connections by the amount of data sent and received.
Make calls To add an unknown phone number from the log to your contacts, select Options > Save to Address Book. To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from one of the recent calls logs, press C. To set the log duration, select Options > Settings > Log duration.
In Contacts, you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time.
Contacts (phonebook) numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialling. 1. In the contacts list, select a contact. 2. Select Options > Defaults. 3. Select a default to which you want to add a number or an address, and select Assign. 4. Select a number or an address you want to set as a default. The default number or address is underlined in the contact card.
To view the list of fixed dialling numbers, select Options > SmartChip numbers. This setting is only shown if supported by your SIM card. To restrict calls from your device to selected phone numbers, select Options > Fixed dial contacts. You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialling list, select Options > New SmartChip contact.
Time management Time management Clock Alarm clock Press , and select Applications > Clock. To set a new quick alarm, select Options > New quick alarm. Quick alarms are set for the next 24 hours and they cannot be repeated. To view your active and inactive alarms, scroll right to the alarm tab. To set a new alarm, select Options > New alarm. Define the repetition, if needed. When an alarm is active, is shown. To turn off the sounding alarm, select Stop.
Create a calendar entry Press , and select Applications > Calendar. 1. To add a new calendar entry, scroll to the desired date, and select Options > New entry and one of the following: ● Meeting — to remind you of an appointment that has a specific date and time ● Meeting request — to create and send a new meeting request. You must have a mailbox set up for sending requests. See "Manage mailboxes", p. 121.
Time management To switch between the month view, week view, day view, and to-do view, press *. To send a calendar note to a compatible device, select Options > Send. If the other device is not compatible with Coordinated Universal Time (UTC), the time information of received calendar entries may not be displayed correctly. Manage calendar entries To delete several events at a time, go to the month view, and select Options > Delete entry > Before date or All entries.
Quickoffice With the Quickoffice applications, you can view .doc, .xls, .ppt, .pps, and .txt documents and download software. Not all file formats or features are supported. Apple Macintosh is not supported. To view a file, press , and select Applications > Office > Quickoffice. Select the location from which you want to view files, browse to the desired folder, and select a file. The files open in the respective applications depending on the file format.
Office folder Quickpoint With Quickpoint, you can view native Microsoft PowerPoint presentations with your device. Quickpoint supports the viewing of presentations saved in .ppt and .pps formats created with Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. To upgrade to a version of Quickpoint that supports editing, when you have a file open, select Options > Updates and upgrades. The upgrade is chargeable.
1. In the Type field, select the measure you want to use. 2. In first Unit field, select the unit from which you want to convert. 3. In the next Unit field, select the unit to which you want to convert. 4. In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value. 5. In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.
Applications folder Applications folder Calculator Press , and select Applications > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations. To make a calculation, enter the first number of the calculation. Select a function such as add or subtract from the function map. Enter the second number of the calculation, and select =. The calculator performs operations in the order they are entered.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message as an e-mail attachment or using other connectivity methods, such as Bluetooth connectivity. You can use Nokia Application Installer in Nokia Nseries PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk). indicates a .sis or .
Applications folder During installation, the device shows information about the progress of the installation. If you install an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application. To start an installed application, locate it in the menu, and select it. If the application does not have a default folder defined, it is installed in the Applications folder in the main menu.
Some Java applications may require that a message be sent or a network connection be made to a specific access point to download extra data or components. In the Application manager main view, scroll to an application, and select Options > Open to change settings related to that specific application. Applications folder ● Default web address — Set the default address used when checking online certificates.
Tools folder Tools folder File manager Press , and select Tools > File mgr.. With File manager, you can browse, manage, and open files on your device, memory card, or a compatible external drive. File manager main view The available options depend on the memory you highlight. Select Options and from the following: 148 ● Remove memory card — Remove the memory card safely from the device without any loss of data. ● Back up phone memory — Create a backup of the device memory to a memory card.
To use enhanced voice commands, press and hold the right selection key in the standby mode, and speak a voice command. The voice command is the name of the application or profile displayed in the list. To edit the voice commands, in the Voice commands application, select an item, such as an application or a profile, and Edit. To listen to the synthesised voice tag, select Options > Playback. To remove a voice command that you added manually, select Options > Remove voice command.
Tools folder Device manager Press mgr.. , and select Tools > Utilities > Device Use Device manager to connect to a server and receive configuration settings for your device, to create new server profiles, or to view and manage existing server profiles. You may receive server profiles and different configuration settings from your service providers and company information management department.
Tools folder ● Audio source — select whether you want to listen to the message through the loudspeaker or the device.
Settings Settings Some settings may be preset for the device by your service provider, and you may not be able to change them. General settings In general settings, you can edit the general settings of your device or restore the device to original default settings. You can adjust time and date settings also in the clock. See "Clock ", p. 138. Personalisation settings Press , and select Tools > Settings > General > Personalization.
Language Changing the settings for the phone language or writing language affects every application in your device until you change these settings again. ● Phone language — Change the language of the display text in your device. This also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.
Settings Security settings Phone and SIM Press , and select Tools > Settings > General > Security > Phone and SmartChip. ● PIN code request — When active, the code is requested each time the device is switched on. Deactivating the PIN code request may not be allowed by some SIM cards. ● PIN code, PIN2 code, and Lock code — You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget the PIN or the PIN2 code, contact your service provider.
Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Settings ● Internet: Yes — The certificate is able to certify servers. ● App. installation: Yes — The certificate is able to certify the origin of a new Java™ application. Select Options > Edit trust setting to change the value. Security module Press , and select Tools > Settings > General > Security > Security module. To view or edit a security module (if available), scroll to it, and press the scroll key.
To define an access point, and positioning server for A-GPS, select Positioning server. The positioning server may be preset by your service provider, and you may not be able to edit the settings. Notation settings To select which measurement system you want to use for speeds and distances, select Measurement system > Metric or Imperial. To define in which format the coordinate information is shown in your device, select Coordinate format, and the desired format.
Settings ● Anykey answer — Select On, and you can answer an incoming call by briefly pressing any keypad key, except the power key. ● Line in use — This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line.
Press , and select Tools > Settings > Phone > Network. Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS . network is indicated with ● Network mode — Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the wireless service providers.
Settings time, but several applications can use the same internet access point. indicates a WLAN access point. Tip: You can create internet access points in a wireless LAN with the WLAN wizard. To establish a data connection, an access point is required.
Press , and select Tools > Settings > Connection > Destinations > New access point, and follow the instructions on the screen. Or, open one of the access point groups, select an access point marked with , and select Edit. Follow the instructions from your service provider. ● Access point name — You obtain the access point name from your service provider. ● User name — The user name may be needed to make a data connection, and is usually provided by the service provider.
Settings ● Network status — Define whether the network name is displayed. ● WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is not needed. In an ad hoc network, all devices must use the same WLAN network name. ● WLAN security mode — Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.
Packet data settings Press , and select Tools > Settings > Connection > Data counter. The packet data settings affect all access points using a packet data connection. ● Data counter connection — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive email) is quicker.
Settings You may receive trusted server settings from your service provider in a configuration message. You can save view or delete these settings in configurations. Access point name control Press , and select Tools > Settings > Connection > APN control. With the access point name control service, you can restrict packet data connections and allow your device to use only certain packet data access points. This setting is only available if your SIM card supports the access point control service.
Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer. If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider. For information about passwords, contact your access point provider, for example, a commercial internet service provider (ISP) or network service provider. Q: How do I close an application that is not responding? A: Press and hold .
Troubleshooting Press , and select Tools > Bluetooth > Bluetooth > Off. Q: Why can’t the other device see the files stored on my device in the home network? A: Make sure that you have configured the home network settings, content sharing is turned on in your device, and the other device is UPnP compatible. Q: What can I do if my home network connection stops working? A: Switch off the wireless LAN (WLAN) connection from your compatible PC and your device, and switch it on again.
3. To save your changes, press Back. When Show WLAN availability is set to Never, the WLAN availability icon is not shown in the standby mode. However, you can still manually scan for available WLAN networks, and connect to WLAN networks as usual.
Troubleshooting 168 Q: Can I use my device as a fax modem with a compatible PC? A: You cannot use your device as a fax modem. However, with call diverting (network service), you can divert incoming fax calls to another phone number.
Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Battery information Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
Battery information To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste.
Additional safety information Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body.
● Not carry the wireless device in a breast pocket. ● Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. ● Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. ● Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Additional safety information 176 Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.
Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.26 W/kg and when properly worn on the body is 1.04 W/kg. Information about this device model can be found at http://www.fcc.
Index Index Symbols/Numerics 1-touch dialing A 178 127 access codes 20 access points 102, 160 accessories See enhancements active standby mode 36, 152 active toolbar 67 in camera 65 in Photos 77 address book See contacts alarm clock 138 alarm, calendar note 139 albums, media 77 anniversary notes 139 answering calls 126 antennas 24 application manager 144 applications 144 assisted GPS (A-GPS) 38 attachments 116, 119 audio messages 114 audio themes 35 auto-update for time/ date 138 B backing up devic
sending 135 synchronising 149 voice tags 135 converter 142 copying text to clipboard 114 copyright protection 110 currency converter 142 D data connections cable 107 device manager 150 PC connectivity 108 synchronisation 149 date and time 138 declining calls 126 device manager 150 dialled numbers 133 dismissing calls 126 display settings 152 document applications 141 downloads 97 DRM (digital rights management) 110 duration of calls 133 E e-mail messages 117 end all calls option 127 enhancements settin
Index sharing content 87 home synchronisation incoming files 89 log 90 setting up 88 settings 89 HSDPA (high-speed downlink packet access) 32 J IAPs (internet access points) 102 images editing 78 printing 81, 82 sharing online 82 inbox, message 116 indicators and icons 26 installation of applications 145 internet connection 94 See also browser internet radio favourites 62 listening 62 settings 63 station directory 63 L I 180 J2ME Java application support 144 Java scripts/ applications 144 K keyguar
N Navi wheel 28 navigation tools 38 network settings 159 news feeds 96 notes 142 O offline mode 32 one-touch dialing 127 operator logo 153 options menu for calls 125 outbox, message 112 P packet data connection access point settings 161 counters 133 settings 163 page overview 96 PDF reader 142 personal certificates 154 personalisation 34, 152 phonebook See contacts photographs See camera Photos active toolbar 71 organising files 76 photos editing 78 file details 76 red-eye 79 tags 77 viewing 75 PictBr
Index 182 roaming 159 S scenes, image and video 68 screen settings 152 scroll key 28 security certificates 154 web browser 99 WEP 162 WPA 162 security code 20 security module 156 self-timer, camera 69 sent messages folder 112 service commands 112 service messages 117 setting wizard 24 settings access point name control 164 access points 160 applications 164 Bluetooth connectivity 104 call barring 158 call divert 158 calls 157 camera 72 certificates 154 configuration 163 display 152 enhancements 153 FM t
U unlocking keypad 28, 154 UPIN code 20 UPnP (Universal Plug and Play architecture) 85 UPUK code 20 USB cable connection 107 useful information 19 V video calls 128, 130 options during 129 Video Centre 91 downloading 91 viewing 91 video clips editing 79 effects 80 sending 80 shared 130 sound clips in 80 transitions 80 video settings 74 Visual Radio 60 settings 61 voice applications 148 voice calls See calls voice commands 127, 148 voice recorder 111 volume controls 31 Z zooming 66, 71 Index time an
