User Manual

Call functions
28
service provider for the SIP profile settings, and save them in your
phone.
If you know a recipient’s SIP address, you can enter it on your contact
card for that person. Select > Addr. Book, the contact, and Options >
Edit > Options > Add detail > SIP or Share view. Enter the SIP address in
the format sip:username@domainname (you can use an IP address
instead of a domain name).
To set your SIP profile settings manually, select > Settings >
Connection > Video sharing > SIP profile. To select whether the video
sharing is enabled, select Video sharing > Always on. To set whether the
live videos are automatically saved, select Video saving > Always save.
Share live video or video clip
1. Select Options > Share video > Live video when a voice call is active
to share live video you are recording with the phone camera.
Select Options > Share video > Recorded clip or Image to share a
saved video clip or an image. Select a clip or image you want to
share.
2. The phone sends the invitation to the SIP address you have added to
the contact card of the recipient.
If necessary, select the SIP address to which you want to send the
invitation. If the SIP address of the recipient is not available, enter a
SIP address. Select OK to send the invitation.
3. Sharing begins automatically when the recipient accepts the
invitation. The loudspeaker is active.
4. Use the toolbar buttons to control the video and image sharing.
5. Select Stop to end the sharing session. Press the end key to end the
voice call.
Accept an invitation
Your phone must be registered to the UMTS network to receive a share
invitation. The invitation shows the sender’s name or SIP address. If your
phone is not set to Silent, it rings when you receive an invitation.
FCC Draft
Model: 6650d-1bH
21 February 2008