User's Guide

indicates a WLAN access point.
Tip: You can create internet access points in
a wireless LAN with the WLAN wizard.
To create a new access point, select Options >
New access point.
To edit the settings of an access point, select
Options > Edit. Follow the instructions from your
service provider.
● Connection name — Enter a descriptive name
for the connection.
● Data bearer — Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined or with a red
asterisk. Other fields can be left empty, unless you
have been instructed otherwise by your service
provider.
To be able to use a data connection, your service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Press , and select Tools > Settings >
Connection > Access points > Options > Edit
or New access point.
Follow the instructions from your service provider.
● Access point name — You obtain the access
point name from your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided
by the service provider.
● Prompt password — If you must enter the
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
● Password — A password may be needed to
make a data connection and is usually provided
by the service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send
your password encrypted when possible.
● Homepage — Depending on the access point
you are setting up, enter the web address or the
address of the multimedia messaging centre.
Select Options > Advanced settings to change
the following settings:
● Network type — Select the internet protocol
type to transfer data to and from your device. The
other settings depend on the selected network
type.
● Phone IP address (for IPV4 only) — Enter the IP
address of your device.
● DNS address — Enter the IP addresses of the
primary and secondary DNS servers, if required
106
Settings
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black