User Manual

27
DR
A
FT
Tip: When 1 new message or 1 new e-mail is displayed in the standby
mode, to listen to the received messages, press and hold the left
selection key until Msg. reader starts.
To select the default language and voice used for reading messages and adjust the
voice properties, such as rate and volume. Select Menu > Settings > Speech.
■ View messages on the SIM card
To view messages on the SIM card, select Menu > Messaging > Options > SIM
messages, and copy the SIM messages to a folder in your phone.
■ Messaging settings
Text message settings
Select Menu > Messaging > Options > Settings > Text message and from the
following options:
Message centres — lists all the defined message centers
Message centre in use — defines which message center is used for delivering text
messages and special message types such as business cards
Character encoding > Full support — to select all characters in the message to be
sent as viewed. If you select Reduced support, characters with accents and other
marks may be converted to other characters.
Receive report (network service) — When set to Yes, the status of the sent message
(Pending, Failed, Delivered) is shown in Reports.
Message validity — If the recipient of a message cannot be reached within the
validity period, the message is removed from the message service center. Note
that the network must support this feature.
Message sent as — to define how the message is sent. Default is Text.
Preferred connection — You can send text messages using the normal GSM
network or packet data if supported by your network.
Reply via same centre (network service) — If you select Yes, and the recipient
replies to your message, the return message is sent using the same message
service center number. All networks do not provide this option.