Nokia 6288 User Guide XXXXXXX Issue 1 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-268 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.
Contents For your safety ..................................6 Memory full .......................................... 34 General information................. 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications ...........................................10 Nokia support and contact information ...........................................11 1. Get started ......................... 12 Install the SIM card and battery ....
Enhancements ...................................... Configuration........................................ Security .................................................. Restore factory settings..................... 69 69 70 71 10.Operator menu.................. 72 11.Gallery ............................... 73 Format memory card .......................... 73 12.Media ................................ 74 Camera ................................................... Media player ...................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 70. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
General information Barring password The barring password (4 digits) is required when you use the Call barring service. See “Security,” p. 70. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
General information Important: Use only services that you trust and that offer adequate security and protection against harmful software. ■ Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services.
Get started 1. Get started ■ Install the SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BP-6M battery.
Get started 4. Insert the SIM card into the SIM card holder (4). Make sure that the SIM card is properly inserted (1) and that the gold-colored contact area on the card is facing downwards. Close the SIM card holder (2), and press it until it snaps into position. 5. Replace the battery (5). 6. Slide the back cover into place (6). ■ Install a memory card The miniSD card included with your phone contains preloaded ringing tones, themes, tones, and graphics.
Get started You can use a memory card to extend the memory of Gallery. See “Gallery,” p. 73. You can insert or change the memory card without switching the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. To insert the memory card, open the memory card holder as shown (1).
Get started For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall socket. 2. Connect the plug from the charger into the CA-44 charging adapter (1), and the adapter plug into the jack on the bottom of your phone (2).
Get started Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in “Configuration,” p. 69 and “Configuration settings service,” p. 10. ■ Start up without a SIM card To start up the phone without the SIM card, accept Start up phone without SIM card?.
Your phone 2. Your phone ■ Keys and parts 1. Power key 2. Volume keys 3. Mirror 4. Camera lens 5. Camera light 6. Camera key 7. Earpiece 8. Left, middle, and right selection keys 7 9. 4-way navigation key 10.Call key 11.End key 12.
Your phone 13.Voice recorder key 14.Infrared (IR) port 15.Memory card slot 16.Charger connector 1413 17.Enhancements connector ■ Standby mode 17 16 15 When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Your phone Active standby In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see Active standby in “Standby settings,” p. 58. When active standby is idle, to access the menu structure, select Menu (5). To access the features in active standby, press the navigation key up or down.
Your phone Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts • To access the list of dialed numbers, press the call key once. See “Make a voice call,” p. 23.
Your phone The phone does not ring for an incoming call or text message. See also “Tones,” p. 58. The alarm clock is set to On. The countdown timer is running. The stopwatch is running in the background. The phone is registered to a GPRS network. A packet data connection is established. The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing call during a packet data dial-up connection.
Your phone To unlock the keypad, open the slide, or select Unlock > OK. If the slide is open, select Unlock, and press within 1.5 seconds. If the Security keyguard is set On, select Unlock, press , and enter the security code. * * To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see “Phone,” p. 68.
Call functions 3. Call functions ■ Make a voice call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call, or to cancel the call attempt, press the end key.
Call functions Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 68. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key.
Call functions ■ Options during a voice call Many of the options that you use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
Write text 4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you write text, appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text To insert a special character, press and hold , or select Options > Insert symbol. Scroll to a character, and select Use. * 2. When you finish writing the word and it is correct, to confirm it, press 0 to add space. If the word is not correct, press repeatedly, or select Options > Matches. When the word that you want appears, select Use. * If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions that are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2.
Messaging 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 45.
Messaging 3. Scroll down, and write your message in the Message: field. See “Write text,” p. 26. To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32. Read and reply to an SMS message 1 message received or the number of new messages with messages received are shown when you have received a message. 1. To view a new message, select Show. To view it later, select Exit.
Messaging ■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See “Multimedia message,” p. 46. A multimedia message can contain text, sound, pictures, video clips, a business card, and a calendar note.
Messaging You can retrieve images and video clips from the Gallery, or to take them directly from the viewfinder, select Options > Insert > New Image or New video clip. 3. To view the message before sending it, select Options > Preview. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32. 5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact.
Messaging Cancel message sending When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel. To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending. Read and reply to a multimedia message Important: Exercise caution when opening messages.
Messaging ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. To free phone memory, delete photos, ringing tones, or other data in the phone memory.
Messaging Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read.
Messaging the message later, select Exit. Select Options to see the available options. ■ Instant messaging Note: This feature may not be available in your product due to your subscription (network service). Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. Before you can use instant messaging, you must subscribe to the service.
Messaging instant messaging service, and select Settings > Automatic login > On phone start-up. Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging session Connection settings — to edit the settings needed for messaging and presence connection Connect to instant messaging To connect to the instant messaging service, access the Instant messages menu, select the desired instant messaging service if needed, and select Login.
Messaging indicates a blocked contact. See “Block and unblock messages,” p. 40. indicates that you have received a new message from a contact. You can add contacts to the list. See “Contacts for instant messaging,” p. 40. Select Groups > Public channel (dimmed if groups are not supported by the network). The list of bookmarks to public groups provided by the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join.
Messaging with an active conversation, New instant message is displayed. To read it, select Read. If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open. New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed.
Messaging Contacts for instant messaging To add contacts to the instant messaging contacts list, do the following: 1. Connect to the instant messaging service, and select IM contacts. 2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from server, Copy from server, or By mobile number. When the contact is successfully added, the phone confirms it. 3. Scroll to a contact, and to start a conversation, select Chat.
Messaging To search for a group, select Groups > Search groups. You can search for a group by a member in the group or by group name, topic, or ID. Create a private group Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.
Messaging Settings Wizard The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New. The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See “Configuration,” p. 69. The e-mail application requires an Internet access point without a proxy.
Messaging Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check for new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. 2. Select Back. 3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message.
Messaging To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder.
Messaging ■ Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder from which you want to delete the messages.
Messaging Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service) Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. If you select SIM message centre, you can view the SIM message center information.
Messaging Default slide timing — to define the default time between slides in multimedia messages Allow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when you are outside your home network. The default setting of the multimedia message service is generally In home network. Incoming multim. msgs.
Messaging Include signature — You can define a signature that is automatically added to the end of your e-mail when you write your message. Reply-to address — Enter the e-mail address to which you want the replies to be sent. SMTP user name — Enter the name that you want to use for outgoing mail. SMTP password — Enter the password that you want to use for outgoing mail. Display terminal window — Select Yes to perform manual user authentication for intranet connections.
Contacts 7. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as a ringing tone for the contact. The SIM card memory can save names with one phone number attached to them.
Contacts 3. To add a number, select Number and a number type. To add another detail, select a text type, an image or a video clip from Gallery, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 51. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.
Contacts ■ Delete contacts To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone memory or From SIM card. Confirm with the security code. To delete a contact, search for the desired contact, and select Options > Delete contact. To delete a number, text item, or an image attached to the contact, search for the contact, and select Details.
Contacts shown for a certain amount of time to viewers, depending on the service provider.
Contacts one ID, select one of them. After subscription to the contact, Subscription activated is shown. Tip: To subscribe to a contact from the Contacts list, search for the contact you want, and select Details > Options > Request presence > As subscription. If you only want to view the presence information but not to subscribe to a contact, select Request presence > One time only. View subscribed names To view the presence information, see also “Search for a contact,” p. 49. 1.
Contacts To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card > Via multimedia, Via text message, Via infrared, or Via Bluetooth. When you receive a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes. ■ Settings Select Menu > Contacts > Settings and from the following options: Memory in use — to select the SIM card or phone memory for your contacts.
Contacts To make a call using the speed-dialing keys, see “Speed dialing,” p. 23. ■ Service and my numbers Select Menu > Contacts and from the following options: Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are included on your SIM card.
Call log 8. Call log To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, which you can customize for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes. To change your presence status information, select My presence > My availability or My presence message.
Settings ■ Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Select Menu > Settings > Themes and from the following options: Select theme — to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones You can change the settings of the selected active profile.
Settings • Personalise — to change the content on the display • Organise — to reorganize the content on the display • Enabling active standby — to change the key for accessing the navigation mode. The same setting is also in the My shortcuts menu. See “Enabling active standby,” p. 61. Wallpaper — to set your phone to display an image or a slide as wallpaper when the phone is in the standby mode. Select Wallpapers > Image or Slide set. Select an image or a slide from Gallery, and Options > Set as wallpaper.
Settings Sleep mode To save most battery power, select Menu > Settings > Display > Sleep mode. The display turns completely black when no function of the phone is used for a certain time. Font size To set the font size for reading and writing messages and viewing contacts and Web pages, select Menu > Settings > Display > Font size. ■ Time and date To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or Auto-update of date/time (network service).
Settings Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark. Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK. Right selection key To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key. See also “Standby mode,” p. 18.
Settings Edit or Remove — to change or deactivate the voice command of the selected function. When you edit the voice tag text, the phone associates it to a new virtual voice tag. Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. Add all or Remove all is not shown if all voice commands are active or inactive.
Settings Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates an active Bluetooth connection. When activating Bluetooth technology for the first time, you are asked to give a name for the phone. Please note that this name will be viewed by other people use a unique name that is easy for others to identify. Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone.
Settings Infrared You can send or receive data to or from a compatible phone or data device (for example, a computer) through the infrared (IR) port of your phone. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
Settings Packet data connection Select Menu > Settings > Connectivity > Packet data > Packet data connection, and from the following options: Always online to set the phone to automatically register to a packet data network when you switch on the phone. indicates that the packet data service is available. If you receive a call or a text message, or make a call during a packet data connection, indicates that the packet data connection is suspended (on hold).
Settings Partner list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the partner is automatically added to the list, using the contact data from the other device. Server synchronisation and PC synchronisation are the original items in the list.
Settings Synchronize from a server To use a remote Internet server, you must subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10 and “Configuration,” p. 69. If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone.
Settings Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in “Security,” p. 70.
Settings mode and no function of the phone has been used. Select On, and set the time. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Welcome note — to write the note you would like to be shown briefly when the phone is switched on.
Settings instant messaging, synchronization, e-mail application, streaming, IM and Web. Your service provider may also send you these settings. See “Configuration settings service,” p. 10. For information on availability and the appropriate configuration settings, contact your network operator or service provider. Select Menu > Settings > Configuration and from the following options: Default config. settings — to view the service providers saved in the phone.
Settings PIN code request — to set the phone to ask for your PIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. PIN2 code request — to select whether the PIN2 code is required when using a phone feature that is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off. Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown, the other menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 92.
Gallery 11. Gallery In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in Gallery use a memory that mainly consists of the miniSD card of your phone.
Media 12. Media ■ Camera You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can zoom up to eight times. Take a photo Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. 1. To open the camera viewfinder, select Menu > Media > Camera.
Media This device supports an image capture resolution of 1600 x 1200 pixels. The image resolution in these materials may appear different. Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To change the folder for saving the recordings, see “Camera settings,” p. 75.
Media 1. Select Menu > Media > Media player > Streaming settings > Configuration 2. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal configuration for streaming. 3. Select Account and a streaming service account contained in the active configuration settings. ■ Music player Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .
Media your ear when the loudspeaker is in use, because the volume may be extremely loud. Music player settings In the Music player menu, the following options may be available: Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select Play.
Media Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio. To use the graphical keys , , , or right to the desired key, and select it. on the display, scroll left or Save radio channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, briefly press or . 2.
Media Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual service > Automatically. Stations — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and select Options > Delete station or Rename.
Media 4. To listen to the latest recording, select Options > Play last recorded. 5. To send the last recording using infrared, Bluetooth wireless technology, or a multimedia message, select Options > Send last recorded. List of recordings Select Menu > Media > Voice recorder > Options > Recordings list. The list of folders in the Gallery is shown. Open Recordings to see the list with recordings. Select Options to select options for files in the Gallery. See “Gallery,” p. 73.
Organizer 13. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organizer The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
Organizer To view a note, scroll to it, and select View. You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar. While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.
Organizer Convert currency Select Menu > Organiser > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign.
Organizer To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.
Applications 14. Applications ■ Games The miniSD card of your phone may contain games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key. For options related to a game, see “Application options,” p. 86. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. See “Bookmarks,” p. 90.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application. Application access — to restrict the application from accessing the network. Different categories are shown.
Web 15. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 88. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Home — to return to your start page Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts. Add bookmark — to save the page as a bookmark Bookmarks — to access the list of bookmarks. See “Bookmarks,” p. 90.
Web Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark, select Show > Save.
Web ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 93. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
Web the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service messages, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On.
Web Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu > Settings > Security > Security module settings.
Web Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign is shown, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown.
SIM services 16. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. Note: For availability, rates, and information on using SIM services, contact your SIM card vendor, for example, network operator, service provider, or other vendor. Accessing these services may involve sending messages or making a phone call for which you may be charged.
PC connectivity 17. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an IR, Bluetooth wireless technology, or USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service).
PC connectivity For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Battery information 18. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Technical Information 19. Technical Information Weight 115 grams (4.1 ounces) incl. BP-6M battery Battery 1100 mAh Li-Ion Battery Networks Wireless networks GSM 900, 1800 and 1900 Size Volume: Length: Width: Thickness: Frequency range (Rx) GSM 900: 925 - 960 MHz GSM1800: 1805 - 1880 MHz GSM1900: 1930 - 1990 MHz Frequency range (Tx) GSM 900: 880 - 915 MHz GSM 1800: 1710 - 1785 MHz GSM1900: 1850 - 1910 MHz Tx output power 2 W (max) 5.6 cubic inches (91 ccm) 3.9 in (100 mm) 1.8 in (46 mm) 0.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Index Index A access codes 9 active standby 59, 61 alarm clock 82 applications 87 audio messages 35 B barring password 10 battery 100 authentication 101 installation 12 Bluetooth 62 Bluetooth settings 63 bookmarks 91 browser 89 browser security 93 business cards 53 C cable USB 67 cache memory 94 calculator 84 calendar 82 calendar note 83 call key 17 calls diverting 68 ending 24 making 68 missed 56 received 56 settings 68 waiting 24 camera 75 camera key 17 camera light 17 camera settings 76 certificates 9
Index games 87 groups 54 I image size 76 indicators 20 info messages 45 infrared 64 instant messaging 36 IR port 18 K keyguard 22 keypad lock 22 L lock the keypad 22 locking the keypad 22 log 56 M maintenance 103 media player 76 memory card 13, 74 memory card slot 18 message center number 29 messages audio 35 counter 56 flash 34 multimedia 31 SMS e-mail 30 templates 34 text 29 missed calls 56 music player 77 mute 24 my numbers 55 my presence 51 N navigation key 17 network 7 notes 84 109 O on/off swi
Index SMS e-mail 30 special characters 27 speed dialing 23, 54 stereo widening 81 stopwatch 85 streaming service 76 synchronize 66 from PC 66 from server 67 T templates 30 text predictive 26 traditional 26 writing 26 text messages 29 themes 58 time settings 60 to-do list 83 traditional text input 27 110 U unlocking the keypad 22 updates 10 USB data cable 67 V vibrating alert 58 video messages 44 voice commands 61 voice dialing 23 voice messages 44 voice recorder 80 voice recorder key 18 volume keys 17
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2.
APPENDIX times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
APPENDIX What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
APPENDIX exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
APPENDIX key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
APPENDIX then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.
APPENDIX the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate.
