DR AF T RM-243 User Guide
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-243 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/ 0434 © 2007 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, Navi, and Visual Radio are trademarks or registered trademarks of Nokia Corporation.
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. NO WARRANTY The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia.
Contents General information ........................ 9 Access codes ...................................................... 9 Lock code......................................................... 9 PIN codes......................................................... 9 PUK codes........................................................ 9 Barring password........................................... 9 Nokia support and contact information . 10 1. Get started..................................
Make a connection .................................... View bookmarks.......................................... Connection security................................... Keys and commands for browsing web pages.............................................................. End a connection........................................ Empty the cache......................................... Browser settings......................................... 36 37 37 37 38 38 39 10.Time management ....................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as web browsing, e-mail, push to talk, instant messaging, and multimedia messaging, require network support for these technologies. ■ Enhancements, batteries, and chargers Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3, AC-4, AC-5, DC-4 chargers or CA-44 charger adapter.
General information ■ Access codes Lock code The lock code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. You can change the code and set the phone to request the code. See Security in General p. 60. When the device is locked, calls may be possible to the official emergency number programmed into your device.
■ Nokia support and contact information Check www.nokia.com/support or your local Nokia web site for the version of the user guide, additional information, downloads, and services related to your Nokia product. Software updates Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application.
To remove the battery, lift it as shown (3). 2. To release the SIM card holder, slide it backwards (4), and lift it (5). 3. Insert the (U)SIM card to the SIM card holder (6). Make sure that the (U)SIM card is properly inserted and that the golden-colored contact area on the card is facing downwards, and the beveled corner faces upwards. Close the SIM card holder (7), and slide it forward to lock it (8). DR AF T 4. Replace the battery (9). 5. Replace the back cover (10) and (11).
1. Opent the side door (1). 2. Place the microSD card in the slot with the golden contact area facing down (2). Push the card gently to lock it into place. 3. Close tight the side door (3). Remove a microSD card 1. Push the card gently to release it. Remove memory card and press 'OK' is displayed. Pull the card out, and select OK. 2. Close tight the side door. ■ Charge the battery AF T Connect the charger to a wall socket. Connect the charger to the device.
■ Normal operating position Use the phone only in its normal operating position. Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life. Your device has internal antennas.
End key (9) Navi™ scroll key (10), hereafter referred to as scroll key Number keys (11) Microphone (12) Nokia AV 2.5-mm connector (13) Loudspeaker (14) Charger connector (15) microSD card slot (16) USB connector (17) Main camera lens (18) ■ Standby mode AF T Camera flash (19) When you have switched on the phone, and it is registered to a network, the phone is in the standby mode and ready for use. To open the list of last dialed numbers, press the call key.
in hospitals. You can listen to music using the music player when the offline profile is active. To leave the Offline profile, press the power key, and select another profile. Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles.
Bluetooth is switched on. Data is being transmitted using Bluetooth. See Bluetooth connection p. 57. A USB connection is active. Other indicators may also be shown. ■ Menu In the menu you can access the functions in your phone. To access the main menu, press the menu key; hereafter described as "select Menu". To open an application or a folder, scroll to it, and press the scroll key. To change the menu view, select Menu > Options > Change Menu view and a view type.
■ Volume control To adjust the earpiece or loudspeaker volume during a call or when listening to an audio file, press the volume keys. To activate the loudspeaker during a call, select Loudspeaker and to deactivate the loudspeaker during a call, select Handset Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. ■ Keypad lock (keyguard) To prevent accidental keypresses, you can lock the keypad.
■ Connect a USB data cable To set the default USB connection mode, select Menu > Settings > Connectivity > USB > USB mode and the desired mode. To set whether the default mode is activated automatically, select Ask on connection > No. ■ Attach a wrist strap AF T Connect the wrist strap according to the graphic. DR 3. Call functions ■ Make a voice call 1. In the standby mode, enter the phone number, including the area code. Press the clear key to remove a number.
Call mailbox To call your voice mailbox, press and hold 1 in the standby mode. Call mailbox is a network service. Contact your service provider for the call mailbox number. To define the call mailbox number if no number is set, select Menu > Settings > Call mailbox, and when Voice mailbox number: is displayed, enter the voice mailbox number. To change the call mailbox number, select Menu > Settings > Call mailbox > Options > Change number, and enter the number.
If you are using a compatible headset with the headset key, press and hold the headset key. 2. Speak the voice command clearly. The phone plays the voice command of the best match. After 1.5 seconds, the phone dials the number; if the result is not the correct one, before dialing select Next and another entry. Using voice commands to carry out a phone function is similar to voice dialing. See Voice commands p. 46. Make a conference call (network service) 1. Make a call to the first participant. 2.
Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press * repeatedly. To send the tone, select OK. Call waiting (network service) During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, select Menu > Settings > Phone sett. > Phone > Call > Call waiting > Activate.
Even if you have denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. Video sharing To use Video sharing you must do the following: • Ensure that your device is set up for person-to-person connections, also known as session initiation protocol (SIP). Ask your service provider for SIP settings and save them in your phone.
Reject—to decline the invitation. The sender receives a message that you rejected the invitation. You can also press the end key to decline the sharing session and disconnect the voice call. To end the sharing session, select Stop. ■ Log To view missed, received, or dialed calls, text messages, packet data connections, and fax and data calls registered by the phone, select Menu > Log. In the standby mode, you can use the call key as a shortcut to the Recent calls log (a network service).
The most common punctuation marks and special characters are available under the 1 key. For more characters, press and hold *. To erase a character, press the clear key. To erase more characters, press and hold the clear key. To insert a space, press 0. To move the cursor to the next line, press 0 three times. ■ Predictive text input To enter any letter with a single keypress, use predictive text input. 1. To write the desired word, press the keys 2–9. Press each key only once for one letter.
To open the Messaging menu, select Menu > Messaging. You can see the New message function and a list of default folders: Inbox—contains received messages except e-mail and cell broadcast messages. When there are unread messages in the inbox, the icon changes to . To open a received message, select Menu > Messaging > Inbox and the desired message. My folders—for organizing your messages into folders. You can create new folders, rename and delete folders.
2. Press the scroll key to select the recipients or groups from Contacts or enter the phone number or e-mail address of the recipient in the To field. Separate recipients with a semicolon (;). 3. When creating an e-mail or multimedia message, scroll down to the subject field, and write the message subject. 4. Scroll down to the message field. 5. Write the message. The message length indicator shows how many characters you can enter in the message.
To retrieve all e-mail messages from the mailbox to your phone, select Options > Retrieve e-mail > All. To delete an e-mail from the phone while still retaining it in the remote mailbox, select Options > Delete > Phone only. The e-mail heading stays in your phone. To delete an e-mail from the phone and the remote mailbox, select Options > Delete > Phone and server.
Preferred conn. — You can send text messages using the normal GSM network or, if supported by the network, packet data. Reply via same ctr. (network service) — If you select Yes, and the recipient replies to your message, the return message is sent using the same message service center number. All networks do not provide this option. For availability, contact your network operator or service provider. Multimedia messaging settings Select Menu > Messag.
E-mail settings Before you use e-mail, you must configure an internet access point (IAP) and define your e-mail settings correctly. Follow the instructions given by your e-mail service provider and internet service provider. Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a mailbox. If no mailbox settings have been defined, you are asked if you want to define the settings.
To add a new contact, select Options > New contact. Fill in the fields you want, and select Done. To assign default numbers and addresses, select a contact and Options > Defaults. Scroll to the desired default option, and select Assign. To copy names and numbers from a SIM card to your phone, select Options > SIM contacts > SIM directory. Scroll to the name you want to copy or mark the desired names, and select Options > Copy to Contacts.
Select Menu > Settings > Profiles. To activate the profile, select the profile and Activate. To personalize a profile, select the profile, Personalise and from the following options: Ringing tone — To set the ringing tone for voice calls, choose a ringing tone from the list. Say caller's name — Select On to have the phone say the caller’s name when the phone is ringing. Ringing type — When Ascending is selected, the ringing volume starts from level one and increases level by level to the set volume level.
8. Media applications ■ Gallery Select Menu > Gallery. Use Gallery to store and organize your images, video clips, music tracks, sound clips, track lists, streaming links, .ram files, and presentations. To copy files to phone memory or to the memory card, select the folder (such as Images), scroll to the file or mark the files, and select Options > Organise > Copy to phone mem. or Copy to memory card. To set an image as your wallpaper, select Images, and scroll to the image.
• To view an image in the full screen, press *. To return to the normal view, press * again. • To rotate an image clockwise or counterclockwise, press 3 or 1. • To zoom in or out, press 5 or 0. • To move on a zoomed image, scroll up, down, left, or right. Edit video clips To edit video clips in Gallery and create custom video clips, scroll to the video clip, and select Options > Video editor. In the video editor you can see two timelines: video clip timeline and sound clip timeline.
To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. To send the video, select Send > Via multimedia, Via e-mail or Via Bluetooth. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message, appears. ■ Camera To use the camera, press the camera key or select Menu > Media > Camera. To take a self portrait, select Options > Use secondary camera.
To play a specific album, select Albums, scroll to the album, and select Options > Play. To listen to specific tracks on the album, select Albums and an album, mark the tracks, and select Options > Play. Track lists To compile and save your own track list, select Track lists > Options > New track list. Select the memory in which to save the track list, and enter a name for the track list. Mark the desired tracks, and press the scroll key.
Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. You can make a call or answer an incoming call while listening to the radio. The radio is turned off when there is an active call. To open Visual Radio, select Menu > Media > Radio. To turn the radio off, select Exit. 9. Web ■ Web To browse web pages, select Menu > Web.
View bookmarks Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. Bookmarks are indicated by the following icons: The starting page defined for the default access point.
3—Return to the previous page. 5—List all open windows. 8—Show the page overview of the current page. Press 8 again to zoom in and view the desired section of the page. 9—Enter a new web address. 0—Go to the start page. * or #—Zoom the page in or out. Mini map Mini map helps you navigate web pages that contain large amount of information. To set Mini map on, select Options > Settings > General > Mini map. Web feeds and blogs AF T The browser automatically detects if a web page contains web feeds.
after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Menu > Web > Options > Clear privacy data > Clear cache. To clear all privacy data, including the cache, cookies, form data passwords, and browsing history, select Menu > Web > Options > Clear privacy data > All. Browser settings Select Options > Settings > General, Page, Privacy or Web feeds, and from the following: General Access point—Select the default access point.
Cookies—Enable or disable the receiving and sending of cookies (a means for content providers to identify users and their preferences for frequently used content). Web feeds Automatic updates—Define whether you want the web feeds to be updated automatically or not, and how often you want to update them. Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider's network.
To set your current city, scroll to a city, and select Options > Set as current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone. ■ Calendar Select Menu > Organiser > Calendar. Press # in the month, week, or day views to automatically highlight the current date. To create a new calendar entry, select Options > New entry and an entry type.
■ Quickoffice To use the Quickoffice applications, select Menu > Applications > Quickoffice. To view a list of Word, Excel, and PowerPoint documents, scroll right or left to the Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft Word documents are listed in the Quickword view. To open a file in its respective application, select it. To sort files, select Options > Sort by and an option.
Freeze panes—to keep the rows and columns above and to the left of the selected cell visible Resize—to adjust the size of columns or rows Quickpoint With Quickpoint, you can view Microsoft PowerPoint presentations on the display of your device. Quickpoint supports the viewing of presentations created in .ppt format in Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported.
12. Locationing ■ Maps With Maps and a compatible GPS receiver with Bluetooth connectivity, you can see your current location on the map, browse maps for different cities and countries, search for addresses and different points of interest, plan routes from one location to another, and save locations as landmarks and send them to compatible devices. Select Menu > Applications > Maps.
To purchase and download city guides for different cities to your device, or purchase a navigation service with voice guidance to use it in Maps, select Options > Extra services > City guides or Add navigation. ■ GPS data This feature is not designed to support positioning requests for related calls. Contact your service provider for more information about how your phone complies with government regulations on location-based emergency calling services.
13. Settings ■ Voice commands To select the functions to use by voice command, select Menu > Settings > Voice comm.. The voice commands for changing profiles are in the Profiles folder. To activate a new voice command for an application, select Options > New application and the application. To play the activated voice command, select Options > Playback. To use voice commands, see Voice dialing p. 19. ■ Phone settings General Personalisation AF T Select Menu > Settings > Phone sett.
Operator logo—this setting is visible only if you have received and saved an operator logo. You can select whether the operator logo is shown. Tones Change the tones of the clock, calendar and currently active profile. See Profiles p. 52. Language Phone language—to change the language for the display texts in your phone. If you select Automatic, the phone selects the language according to the information on your SIM card. Writing language—to change the writing language of your phone.
type is set to Beep once or Silent, automatic answer cannot be used, and you must answer the phone manually. Lights—To set the phone lights continuously on while using the enhancement, select On. Security Select Phone and SIM card, Certificate management, or Security module. Phone and SIM card You can change the following codes: lock code, (U)PIN code, and PIN2 code. Avoid using access codes similar to emergency numbers to prevent accidental dialing of the emergency number.
A list of authority certificates that have been stored in your phone is displayed in Certificate management. To see a list of personal certificates if available, scroll right. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security.
To enable a positioning method, select Positioning methods, scroll to the positioning method, and select Options > Enable. To stop using it, select Options > Disable. To define the positioning server access point, select Positioning server > Access point and the desired access point. Then select Server address, and enter the domain name or URL address of the server. Phone Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or Network.
Line in use (network service)—shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending short messages. Calls on both lines can be answered irrespective of the selected line. You cannot make calls if you select Line 2 and have not subscribed to this network service. To prevent line selection, select Line change > Disable if supported by your SIM card.
from a list of networks, select Manual. If the connection to the manually selected network is lost, the phone sounds an error tone and asks you to select a network again. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your phone. Cell info display (network service)—To set the phone to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception, select On.
You may receive the settings from your service provider. See Configuration settings p. 13. • APN control—to restrict the use of packet data access points. This setting is only available if your SIM card supports the service. To change the settings, you need the PIN2 code. Applications To view and edit settings of applications installed to your phone, select Menu > Settings > Phone sett. > Applications. 14.
Application settings Select Menu > Tools > App. mgr. > Options > Settings and from the following settings: Software installation — to select if you want to allow installation of all Symbian applications (All) or only signed applications (Signed only) Online certif. check — to select if you want App.
If you insert another password-protected memory card into your phone, you are prompted to enter the password of the card. To unlock the card, select Options > Unlock memory card. Check memory consumption To check the memory consumption and the amount of memory available on your memory card, select Options > Memory details. File manager To see a list of the folders in the phone memory, select Menu > Settings > Data mgr. > File mgr.. Scroll right to see the folders on the memory card.
Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM 10, OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be revoked.
To view detailed information such as the validity status and the ability to send the file, scroll to an activation key, and select it. 15. Connectivity ■ PC Suite With PC Suite you can synchronize contacts, calendar and to-do notes and notes between your phone and a compatible PC. You may find more information about PC Suite and the download link in the support area on the Nokia website, www.nokia.com/pcsuite.
When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first. Send data There can be only one active Bluetooth connection at a time. 1.
Receive data When you receive data using Bluetooth technology, a tone sounds, and you are asked if you want to accept the message. If you accept, the item is placed in Inbox in Messaging. ■ USB data cable Select Menu > Settings > Connectivity > USB. To select the default USB connection mode, select USB mode and the desired mode, PC Suite, Media player or Data transfer. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection > Yes.
16. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste.
Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
• Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. DR AF T Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.
Index A camera 34 certificates 48 clock 40 connectivity 57 contacts 29 access codes barring password 9 change 48 lock code 9, 12 module PIN 9 PIN 9, 12 PIN2 9 PUK 9 PUK2 9 signing PIN 9 UPIN 9 UPUK 9 access points 52 active standby 14 Adobe Reader 41 alarm clock. See clock. C E DR battery charging 12 Bluetooth connection settings 57 paired devices 58 receiving data 59 sending data 58 browser. See web. data cable 59 data connection indicators 15 data transfer 59 digital rights management.
multimedia settings 28 text messages 27 messages audio 25 listening to 29 organizing 26 outbox 25 receiving 25 sending 25 SIM messages 27 writing 25 mobile browser. See web. music player library 34 listening to music 35 phone language 47 predictive text input 47 security 48 time 47 writing language 47 SIM card using phone without a SIM card 14 speed dial calling 19 standby mode 14 T text input 24, 47 copying text 24 predictive 24 themes 30 N U O USB. See data cable.
