User Manual

Write text
The input methods provided in the device may vary
according to different sales markets.
Input method indicators
The input method indicator is shown in the
navigating field or on the upper right corner of the
inputting frame. Please note that not all input
methods are available under all circumstances.
Press * to view other available input methods.
Default input method
Please notice that aiming for different
requirements for various characters' input
positions, the device has preset the relevant default
input methods and usable input methods. For the
input positions where the default input method is
Pinyin, you could change into other input method
as default when necessary.
Press
, and select Tools > Settings >
General > Personalisation > Language >
Default input. This selection is only visible when
you select a Chinese language in the writing
language setting.
Switch input methods
Press * to select desired input method from the
selection list (the currently the active input method
is not listed).
Press # repeatedly to switch among different
character modes.
Pinyin input method
Pinyin symbols are mapped to number keys. You can
press the corresponding number key once
regardless of the intended symbol’s position on the
key. The device will make logical combinations and
display all feasible matches to those Pinyin symbols
you just pressed.
Use Pinyin input method
1. Input Pinyin symbols and tones: Press number
key once for each Pinyin symbol you want to
input (use "v" for "ü"); When you start to input,
Chinese input window will be shown on the
screen: It shows all the Pinyin letter
combinations matching to the keys you pressed;
99
Write text