User's Guide

the recording, the time remaining, zoom bar when
zooming, and the selection keys.
Record videos
To record a video, do the following:
1. If the camera is in the image mode, select the
video mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon (
) is shown and a tone sounds,
indicating that recording has started.
3. To pause recording at any time, press Pause.
Select Continue to resume recording. Video
recording automatically stops if recording is set
to pause and there are no keypresses within a
minute.
To zoom in or out of the subject, use the zoom
key in your device.
4. To stop recording, select Stop. The video clip is
automatically saved in the Photos application.
The maximum length of the video clip depends
on the available memory.
To activate the front camera, select Options > Use
secondary camera. To start recording a video,
press the scroll key. To zoom in or out, scroll up or
down.
After recording a video
After you record a video clip, select from the
following options in the active toolbar (available
only if Show captured video is set to On in the
video settings):
● To immediately play the video clip you just
recorded, select Play (
).
● If you do not want to keep the video, select
Delete (
).
● To send the video clip using a multimedia
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
or select Send (
). See "Write and send
messages", p. 115. See "Send data using
Bluetooth connectivity", p. 106. This option is
not available during a call. You may not be able
to send video clips saved in the MPEG-4 file
format in a multimedia message.
You can also send the video clip to a person you
are talking to. Select Send to caller (
) (only
available during a call).
● To add the video clip to an album, select Add to
album
● To view information about the video clip, select
Details
● To upload the video clip to a compatible online
album, select
(only available if you have set up
72
Camera