User's Guide

1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed
during image capture.
See "Active
toolbar", p. 66.
3 — Battery charge level indicator
4 — Image resolution indicator
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use.
6 — The device memory (
) and memory card ( )
indicators, which show where images are saved
7 — GPS signal indicator.
See "Location
information", p. 68.
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after
capturing an image or recording a video. Scroll to
items, and select them by pressing the scroll key.
You can also define when the active toolbar is visible
on the display.
The settings in the active toolbar return to the
default settings after you close the camera.
To view the active toolbar before and after
capturing an image or recording a video, select
Options > Show icons. To view the active toolbar
only when you need it, select Options > Hide
icons. To activate the active toolbar when it is
hidden, press the scroll key. The toolbar is visible for
5 seconds.
Before capturing an image or recording a video, in
the active toolbar, select from the following:
to switch between the video mode and the
image mode
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See "You
in the picture—self-timer", p. 70.
to activate the sequence mode (images only).
See "Take pictures in a sequence", p. 69.
to select a colour effect
to show or hide the viewfinder grid (images
only)
to adjust white balance
66
Camera