User's Guide

3. Insert the battery.
4. To replace the cover,
direct the top locking
catch toward its slot
first and then press
down until the cover
locks into place.
Switch the device on
1. Press and hold the power key.
2. If the device asks for a PIN code
or lock code, enter it, and press
the left selection key. The
factory setting for the lock
code is 12345.
Your device has internal
antennas.
Note: Your device may have
internal and external antennas. As with any radio
transmitting device, avoid touching the antenna
unnecessarily when the antenna is in use. Contact
with such an antenna affects the communication
quality, may cause the device to operate at a higher
power level than otherwise needed and may reduce
the battery life.
1 — Bluetooth and wireless LAN antenna, and GPS
receiver
2 — FM transmitter antenna
3 — Cellular antenna
Note that the Bluetooth, WLAN, GPS, and FM
transmitter antennas are located in the back cover
of your device. If you change the back cover, check
that the new cover includes these antennas,
otherwise these connections stop working.
16
Get started