User's Manual

Camera
57
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup, see
‘Setup settings—color and lighting’, p. 58. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again.
Select Options > Settings to select the right image quality
for different purposes, select the album where to save the
images, view the captured image after it has been taken,
use digital zoom, select the capture tone, select the
memory for saving the images or restore the default
settings.
To change the main settings, select Options > Settings
and from the following:
Image quality— Print 2M - Large (1600x1200
resolution), Print 1M - Medium (1152x864 resolution) or
MMS 0.3M - Small (640x480 resolution). If you want to
print the image, select Print 2M - Large or Print 1M -
Medium. To send the image through MMS, select MMS
0.3M - Small.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom (main camera only)—On
(continuous) allows the zoom increments to be smooth
and continuous between digital and extended digital
zoom, On (paused) allows the zoom increments to pause
at the digital and extended digital step point, and Off
allows a limited amount of zoom while retaining the
image resolution.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Restore camera settings—Select Yes to return the default
values to the camera settings.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
P2954_en.book Page 57 Tuesday, July 3, 2007 2:51 PM