User's Manual

Messaging
42
To remove a mailbox and its messages from your device,
scroll to it, and press .
To create a new mailbox, select Options > New mailbox.
Select Mailboxes and a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail to enter your user name and password,
enter the name of the incoming mail server, select the
access point, enter a name for the mailbox, select the
mailbox type, select the security options and password
encryption for POP3 accounts.
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an internet access point (IAP).
See ‘Access points’, p. 124.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting cannot be changed.
Security (ports)—Select the security option used to secure
the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail to enter your e-mail address, the name
of the outgoing mail server, and settings for User name,
Password, Access point in use, Security (ports), and Port
similar to the ones in Incoming e-mail.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you
by your service provider.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
P2954_en.book Page 42 Tuesday, July 3, 2007 2:51 PM