FC C D ra ft RM-210 User Guide 9200882 Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-210 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options. This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Contents For your safety ................................. 8 General information ...................... 11 Access codes ................................................... Configuration settings service ................... Software updates........................................... Download content......................................... Nokia support ................................................. 11 11 12 12 13 1. Get started..................................
Phone software updates .............................. 52 Restore factory settings............................... 52 10.Operator menu.......................... 52 11.Gallery ....................................... 53 Print images .................................................... 53 Memory card................................................... 53 12.Media......................................... 54 Camera.............................................................. Video................................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode.
instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies. ■ Shared memory The following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messaging, e-mail, calendar, to-do notes, Java™ games and application, and note application.
General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see Security p. 48. PIN codes The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See Security p. 48.
contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia website, www.nokia.com/support. When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed. To save the settings, select Show > Save. If required, enter the PIN code supplied by the service provider. To discard the received settings, select Exit or Show > Discard.
■ Nokia support Check www.nokia.com/support or your local Nokia website for the latest version of the user guide, additional information, downloads, and services related to your Nokia product. On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia service center at www.nokia.com/repair. 1.
3. To release the SIM card holder, gently pull the locking clip of the card holder, and open it. 4. Insert the SIM card into the SIM card holder. Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. 5. Close the SIM card holder, and press it until it snaps into position. 6. Replace the battery. FC C D ra ft 7. Slide the back cover into place. ■ Insert a microSD card 1. Open the memory card holder as shown. 2.
Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. ■ Remove the microSD card You can remove or replace the microSD card during phone operation without switching the phone off. 1. Make sure that no application is currently accessing the micro SD memory card. 2. Open the memory card holder. 3.
The charging time depends on the charger used. Charging a BL-5C battery with the AC-4 charger takes approximately 1 hour and 30 minutes while the phone is in the standby mode. ■ Open and close the phone You open and close the phone manually. When you open the fold of the phone, it opens up to approximately 165 degrees. Do not try to force the fold open more. Depending on the theme, a tone sounds when you open and close the phone.
■ Antenna Your device has an internal antenna. Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life. 2.
11 Mini display 12 Music key; rewinds current track (press and hold) or skips to previous track (short key press) 13 Music key play/pause 14 Loudspeaker 15 Music key; fast forwards current track (press and hold) or skip to next track (short key press) 16 Camera key 17 Volume down key 18 Volume up key/PTT key 19 Camera flash D ra ft 20 2-megapixel camera 21 Headset connector 22 USB port 23 Charger connector FC C 24 Memory card slot Warning: The scroll key and the middle selection key (6) in this devic
■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
To access active standby applications, first scroll up, and then scroll to the application, and select Select or View. To select an application or event, scroll to it and press the scroll key. To end the active standby navigation mode select Exit. To switch the active standby mode off, select Options > Active standby sett. > Active standby mode > Off. To organize and change the active standby mode, activate the navigation mode, and select Options > Personalise view or Active standby sett..
If you have two phone lines, the second phone line is selected. All incoming calls are diverted to another number. The loudspeaker is activated, or the music stand is connected to the phone. Calls are limited to a closed user group. The timed profile is selected. , , , or A headset, handsfree, loopset, or music stand enhancement is connected to the phone. ■ Flight mode D ra ft You can deactivate all radio frequency functions and still have access to offline games, the calendar, and phone numbers.
If the security keyguard is activated, enter the security code if requested. To answer a call when the keyguard is on, press the call key or open the phone. When you end or reject the call, the keypad automatically locks. For Security keyguard, see Phone p. 46. When the keyguard is on, calls may be possible to the official emergency number programmed into your device.
• If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in Call p. 46. Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. Voice commands are language-dependent. To set the language, see Recognition lang. in Phone p. 46. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1.
■ Options during a voice call Many of the options that you can use during a call are network services. For availability, contact your service provider. During a call, select Options and from the following: Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record or Loudspeaker.
If the call is not successful (for example, video calls are not supported by the network or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead. Tip: To increase or decrease the volume during a call, press the volume keys. The video call is active when you can see two video images and hear the sound through the loudspeaker. If the call recipient denies the video sending, you may see a still image or a grey background graphic.
To pause video sharing, select Pause. The middle selection key changes to Continue. To resume the video sharing select Continue. The middle selection key changes to Pause. To end a video sharing session, select Stop. Video sharing ended is shown to both participants. To check availability and costs, and to subscribe to the service, contact your network operator or service provider. 4. Write text D ra ft You can enter text (for example, when writing messages) using traditional or predictive text input.
■ Predictive text input Predictive text input is based on a built-in dictionary to which you can add new words. 1. Start writing a word using the keys, 2 to 9. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. 2. When you finish writing the word and it is correct, to confirm it, press 0 to add a space. If the word is not correct, press * repeatedly, and select the word from the list.
6. Messaging You can read, write, send, and save text messages, multimedia messages, e-mail messages, audio messages and flash messages. All messages are organized into folders. ■ Message Creating a message Creating a new message is by default a text message but changes automatically into multimedia message when files are added. Text messages (SMS) D ra ft With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).
To use a text template, scroll down and select Insert. 4. To send the message, select Send, or press the call key. Read and reply to a text message 1. To view a received message, select Show. To view it later, select Exit. To read the message later, select Menu > Messaging > Inbox. 2. To reply to a message, select Reply. Write the reply message. To add a file scroll down, and select Insert. 3. To send the message, select Send, or press the call key.
If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. To cancel the sending of the messagesOutbox, scroll to the desired message, and select Options > Cancel sending. Read and reply to a multimedia message Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. 1.
Create a message 1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see Voice recorder p. 57. 2. Speak your message. 3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number. 4. To send the message, select Send, or press the call key. Listen to a message To open a received audio message, select Play. If more than one message is received, select Show > Play. To listen to the message later, select Exit.
■ E-mail application The e-mail application uses a packet data connection (network service) to allow you to access your e-mail account. This e-mail application is different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system. You can write, send, and read e-mail with your phone. Your phone supports POP3 and IMAP4 e-mail servers. This application does not support keypad tones.
If more than one e-mail account is defined, select the account from which you want to send the e-mail. To edit or continue writing your e-mail later, select Exit > Yes. The e-mail is saved in Drafts. Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail.
Spam filter To activate and define a spam filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows you to put specific senders on a black or white list. Messages from black list senders are filtered to the Junk folder. Messages from unknown and white list senders are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.
■ Delete messages To delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. ■ SIM messages SIM messages are specific text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. To read SIM messages, select Menu > Messaging > Options > SIM messages.
Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. Msg.
outside your home network. The default setting of the multimedia message service is generally In home network. The availability of this menu depends on your phone. Incoming MMS msgs. — to decide how multimedia messages are retreived. This setting is not shown if Allow MMS receptn. is set to No. Allow adverts — to receive or reject advertisements. This setting is not shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject. Configuration sett.
The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by . ■ Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for. ■ Save names and phone numbers Names and numbers are saved in the used memory. To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact.
■ Edit contact details Search for the contact, and select Details. To edit a name, number, or text item, or to change the image, select Options > Edit. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. ■ Synchronize all Synchronize your calendar, contacts data, and notes with a remote internet server (network service). For details see Synchronize from a server p. 45.
Name display — to select whether the contact’s first or last name is displayed first Font size — to set the font size for the list of contacts Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.
9. Settings ■ Profiles Your phone has various settings groups called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles, the desired profile, and from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes.
■ Main display Select Menu > Settings > Main display and from the available options: Wallpaper — to add the background image in the standby mode Active standby — to switch the active standby mode on or off and to organize and personalize the active standby mode Standby font colour — to select the color for the texts in the standby mode Navigation key icons — to display the icons of the current scroll key shortcuts in the standby mode when active standby is off Notification details — to show or hide details
Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK). ■ My shortcuts With personal shortcuts you get quick access to often used functions of the phone. Left selection key To select a function from the list, select Menu > Settings > My shortcuts > Left selection key.
To select the phone functions to activate with voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll to a function. indicates that the voice tag is activated. To activate the voice tag, select Add. To play the activated voice command, select Play. To use voice commands, see Enhanced voice dialing p. 21.
Set up a Bluetooth connection Select Menu > Settings > Connectivity > Bluetooth and from the following options: Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates that Bluetooth is activated. When activating Bluetooth technology for the first time, you are asked to give a name for the phone. Use a unique name that is easy for others to identify. My phone's visibility or My phone's name — to define how your phone is shown to other Bluetooth devices.
To define the settings for connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select Edit active access pt. > Packet data acc. pt., enter a name to change the access point settings, and select OK. Select Packet data acc. pt., enter the access point name (APN) to establish a connection to a network, and select OK. Establish an internet connection by using your phone as a modem.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list, other than Server sync or PC synchronisation. According to the settings, the selected data is copied or synchronized. Synchronize from a compatible PC To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software for your phone on the PC. Use Bluetooth wireless technology or a USB data cable for the synchronization, and start the synchronization from the PC.
To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & Media, or Data storage. ■ Call Select Menu > Settings > Call and from the following options: Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in Security p. 48.
Language settings — to set the display language of your phone, select Phone language. Automatic selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for the voice playback, select Recognition lang.. See Enhanced voice dialing p. 21 and Voice commands in My shortcuts p. 41.
Default config. sett. — to view the service providers saved in the phone. To set the configuration settings of the service provider as default settings, select Options > Set as default. Activ. def. in all apps. — to activate the default configuration settings for supported applications Preferred access pt. — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
connection. In this case, the recipient’s phone number and the message center number must be included in the fixed dialing list. Closed user group — to specify a group of people whom you can call and who can call you (network service) Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.
This phone supports OMA DRM 1.0 and 2.0. ■ Phone software updates Your service provider may send phone software updates over the air directly to your device. This option may not be available, depending on your phone. Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the update is completed and the device is restarted. Be sure to back up data before accepting a software update.
11. Gallery In this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or a microSD memory card (not included in sales pack) and may be arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.
Format the memory card When a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it. To format a memory card, select Menu >Gallery or Applications, the memory card folder , and Options > Format memory card > Yes. When formatting is complete, enter a name for the memory card.
Take a self-portrait Close the fold and press and hold the camera key. Use the mini display as a view finder. Press the camera key to take the photo. Open the phone to view the captured picture. Zoom In camera or video mode use the volume keys to zoom in and out. Your device supports an image capture resolution up to 1200x1600 pixels. Camera options Select Options > Night mode on if the lighting is dim, Self-timer on to activate the self-timer, or Image sequence on to take images in a fast sequence.
Record a video clip Select Menu > Media > Video > Record or press and hold the camera key. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips. To zoom in or out, press the volume key up or down, or scroll left and right.
To stop the playing, press and hold the end key. To skip to the next track, select track, select . . To skip to the beginning of the previous To rewind the current track, select and hold . To fast forward the current track, select and hold . Release the key at the position you want. Music player options Select Menu > Media > Music player > Go to Music player.
Save radio frequencies 1. To start the search, select and hold 0.05 MHz steps, briefly press or or . . To change the radio frequency in 2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the radio station. Listen to the radio Select Menu > Media > Radio.
■ Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later. The recorder cannot be used when a data call or GPRS connection is active. Voice recorder 1. Select Menu > Media > Voice recorder. To use the graphical keys , the desired key, and select it. , or on the display, scroll left or right to 2. To start the recording, select .
To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set the radio as the alarm tone, select Alarm tone:. If you select the radio as an alarm tone, connect the headset to the phone. To set a snooze time-out, select Snooze time-out and the time. Stop the alarm The phone sounds an alert tone even if the phone was switched off.
Note alarm The phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit. ■ To-do list To save a note for a task that you must do, select Menu > Organiser > To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add.
Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared. ■ Countdown timer To start the countdown timer, select Menu > Organiser > Countd. timer > Normal timer, enter the alarm time, and write a note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.
14. Push to talk Select Menu > Push to talk. Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people (channel) having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator.
Channel security: — Select Public channel or Private channel. Image: — Select Change and an image from the Gallery or the Default graphic to set a graphic for the new channel. To send an invitation to the channel, select Yes when the phone requests it. The recipient of the invitation is added to the member list of the channel when the invitation is accepted. To send further invitations, select Menu > Push to talk > Channel list, a channel, and Options > Send invitation.
To make a channel call, a one-to-one call, or a call to multiple recipients, press and hold the PTT key as long as you talk. To listen to the response, release the PTT key. You may be able to check the login status of your contacts in Menu > Push to talk > Contacts list. This service depends on your network operator and is only available for subscribed contacts. To subscribe a contact, select Options >Subscribe contact, or if one or more contacts are already marked, Subscribe marked.
3. Press and hold the PTT key to talk. Release the PTT key to hear the response. 4. Press the end key to terminate the call. Receive a PTT call A short tone notifies you of an incoming PTT call. Informations such as the channel, the phone number, or the nickname (network service) of the caller are displayed. You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls.
To make a one-to-one call, select the desired request, and press and hold the PTT key. To send a call request back to the sender, select Options > Send PTT callback. To delete the request, select Delete. To save a new contact or to add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact.
PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No — to hide your PTT address from channel and one-toone calls ■ Configuration settings You may receive the settings for connecting to the service from your service provider. See Configuration settings service p. 9. You can enter the settings manually. See Configuration p. 47. To select the settings for connecting to the service, select Menu > Push to talk > Configuration sett..
■ Launch an application Your phone software includes some Java applications. Select Menu > Applications > Collection. Scroll to an application, and select Open.
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM actions > Yes. Accessing these services may involve sending messages or making a phone call for which you may be charged. 17.
3. Select Account and a browsing service account contained in the active configuration settings. 4. Select Displ. term. window > Yes to perform manual user authentication for intranet connections. Make a connection to the service in one of the following ways: • Select Menu > Web > Home; or in the standby mode, press and hold 0. • To select a bookmark of the service, select Menu > Web > Bookmarks. • To select the last URL, select Menu > Web > Last web addr..
3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third party sites are not affiliated with Nokia and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take the precautions for security or content.
■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See Cache memory p. 72. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
To set whether you want to receive service messages, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Autom. connection > On.
authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown even if the certificate should be valid, check that the current date and time in your device are correct. Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.
18. PC connectivity You can send and receive e-mail, and access the internet when your phone is connected to a compatible PC through a Bluetooth or a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote internet server (network service).
For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. ■ Nokia battery authentication Always use original Nokia batteries for your safety.
4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. To create a text message, • For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515. • For India only: Enter Battery followed by the 20-digit battery code, for example, Battery 12345678919876543210, and send to 5555.
20. Technical Information Weight 105 grams (3.7 ounces) incl.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body.
• Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on. Check for adequate signal strength.
Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. FC C D ra ft Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.
APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5.
Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones.
FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level.
is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. How does FCC Audit Cell Phone RF? D ra ft After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements.
Index A access codes 9 accessories. See enhancements. activation keys 49 active standby mode 17, 40 alarm clock 57 antenna 15 applications 66 audio messages 28 B FC C C D ra ft barring password 9 battery authentication 76 charging 13 charging, discharging 75 installation 11 blacklist 32 Bluetooth 42, 74 bookmarks 69 browser appearance settings 70 bookmarks 69 security 71 setting up 68 business cards 37 cache memory 72 calculator 59 calendar 58 call functions 20 call key 15 call log 38 call register.
e-mail application 30 end key 15 ending calls 20 enhancements 8 equalizer 57 F factory settings 50 flash messages 28 FM radio 55 font size 40 G gallery 51 games 66 GPRS 43 H D ra ft handsfree. See loudspeaker.
parts 15 settings 46 phone lock. See keypad lock. PictBridge 45 PIN codes 9, 14 play 16 plug and play service 14 POP3 30 predictive text input 24, 25 profiles 39 protected files 49 PTT. See push to talk.
recorder 57 volume key 16 W wallpaper 40 web 68 wireless markup language (WML) 68 wrist strap 14 writïng text 24 X XHTML 68 Z FC C D ra ft zoom key 16 93
