Nokia 6151 User Guide 9253390 Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-200 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revize this document or withdraw it at any time without prior notice. The availability of particular products may vary by region.
Contents For your safety.......................... 6 Access codes............................................ 9 Configuration settings service ........ 10 Download content .............................. 10 Nokia support and contact information........................................... 11 Folders.................................................... Flash messages .................................... Audio messages................................... Voice messages....................................
Restore factory settings..................... 61 Collection............................................... 84 10.Operator menu.................. 62 16.Web.................................... 86 11.Gallery ............................... 63 Format memory card .......................... 63 12.Media ................................ 64 Camera ................................................... Video ....................................................... Media player .......................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 59. If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
General information Barring password The barring password (4 digits) is required when you use the Call barring service. See “Security,” p. 59. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
General information For the availability of different services, pricing, and tariffs, contact your service provider. Important: Use only services that you trust and that offer adequate security and protection against harmful software. ■ Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.
Get started 1. Get started ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BP-6M battery.
Get started 4. Replace the battery (7). 5. Place the back cover in the correct position (8). 6. Slide the back cover into place (9). ■ Install a memory card The microSD card, not provided with your phone, can be loaded with ringing tones, themes, tones, and graphics. If you delete, reload, or replace this card, these functions and features may not function properly. Use only compatible microSD cards with this device.
Get started Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device. You can use a memory card to extend the memory of Gallery. See “Gallery,” p. 63. You can insert or change the memory card without switching the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
Get started Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall outlet. 2. Connect the plug from the charger into the jack on the bottom of your phone.
Get started Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in “Configuration,” p. 58 and “Configuration settings service,” p. 10. ■ Start up without a SIM card To start up the phone without the SIM card, accept Start up phone without SIM card?.
Your phone 2.
Your phone 13 Volume keys 14 Infrared (IR) port 15 Camera lens 16 Camera key ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. 1. Network mode indicator 2. Signal strength of the cellular network 3. Battery charge level 4. Indicators 5. The name of the network or the operator logo 6. Clock 7. Display 8. The left selection key is Go to or a shortcut to another function. See “Left selection key,” p. 48. 9.
Your phone Active standby In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see Active standby in “Standby settings,” p. 46. When active standby is idle, to access the menu structure, select Menu (5). To access the features in active standby, scroll up or down.
Your phone Timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts • To access the list of dialed numbers, press the call key once. See “Make a voice call,” p. 23.
Your phone The phone does not ring for an incoming call or text message. See also “Tones,” p. 46. The alarm clock is set to On. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to a GPRS, EGPRS, or WCDMA network. / A packet data connection is established. / The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing call during a packet data dial-up connection.
Your phone To unlock the keypad select Unlock, and press within 1.5 seconds. If the Security keyguard is set On, select Unlock, press , and enter the security code. * * To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see “Phone,” p. 56. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions 3. Call functions ■ Make a voice call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call, or to cancel the call attempt, press the end key.
Call functions Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM. In WCDMA it is possible to send voice and data simultaneously. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 56. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1.
Call functions ■ Options during a voice call Many of the options that you use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
Write text 4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you write text, appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text If the word is not correct, press repeatedly, or select Options > Matches. When the word that you want appears, select Use. * If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save. ■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions that are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2. Scroll through the menu, and select an option (for example, Settings). 3.
Messaging 6. Messaging You can read, write, send, and save text, multimedia, SMS e-mail, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages (network service). Before you can send text or SMS e-mail messages, you must save your message center number. See “Message settings,” p. 37. To check SMS e-mail service availability and to subscribe to the service, contact your service provider.
Messaging 3. Scroll down, and write your message in the Message: field. See “Write text,” p. 26. To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32. Read and reply to an SMS message 1 message received or the number of new messages with messages received are shown when you have received a message. 1. To view a new message, select Show. To view it later, select Exit.
Messaging To read SIM messages, select Menu > Messaging > Options > SIM messages. ■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See “Multimedia message,” p. 38.
Messaging card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert or Options > Insert. You can retrieve images and video clips from the Gallery, or to take them directly from the viewfinder, select Options > Insert > Image > New Image or Insert > Video clip > New video clip. 3.
Messaging the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. Cancel message sending When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel. To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.
Messaging ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. To free phone memory, delete photos, ringing tones, or other data in the phone memory.
Messaging Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read.
Messaging the message later, select Exit. Select Options to see the available options. ■ Voice messages The voice mailbox is a network service, and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, find, or edit your voice mailbox number, select Voice mailbox number. If supported by the network, indicates new voice messages.
Messaging To delete all messages from all folders, select Menu > Messaging > Delete messages > All messages > Yes. ■ Message settings General General settings are common for text and multimedia messages.
Messaging E-mail centre in use — to select the SMS e-mail message center in use Message validity — to select the length of time for which the network attempts to deliver your message Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service) Use packet data > Yes — to set GPRS or WCDMA as the preferred SMS bearer Character support > Full — to select all characters in the messages to be sent as viewed Reply via same centre > Yes — to allow the recipient of yo
Messaging reception. This setting is not shown if Allow multimedia recept. is set to No. Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set to No, or Incoming multim. msgs. is set to Reject. Configuration settings > Configuration — only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal configuration for multimedia messaging.
Contacts 7. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as a ringing tone for the contact. The SIM card memory can save names with one phone number attached to them.
Contacts 3. To add a number, select Number and a number type. To add another detail, select a text type, an image or a video clip from Gallery, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. . If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.
Contacts ■ Delete contacts To delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone memory or From SIM card. Confirm with the security code. To delete a contact, search for the desired contact, and select Options > Delete contact. To delete a number, text item, or an image attached to the contact, search for the contact, and select Details.
Contacts Memory status — to view the free and used memory capacity ■ Groups Select Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images. ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change.
Log 8. Log To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients. To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data conn. timer.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, which you can customize for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile Personalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time.
Settings Select theme — to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones > Incoming call alert, Ringing tone, Ringing volume, Incom. call video, Vibrating alert, PTT voice opt., PTT notif. tone, PTT callb. tone, Msg. alert tone, IM alert tone, Keypad tones, Other tones, App.
Settings • Enabling active standby — to change the key for accessing the navigation mode. The same setting is also in the My shortcuts menu. See “Enable active standby,” p. 49. Wallpaper — to set your phone to display an image or a slide as wallpaper when the phone is in the standby mode. Select Wallpapers > Image or Slide set. Scroll to an image or a slide and select Select to activate the image or slide as wallpaper. Select Open Camera to create a new image.
Settings Font size To set the font size for reading and writing messages and viewing contacts and Web pages, select Menu > Settings > Display > Font size. ■ Time and date To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or Auto-update of date/time (network service).
Settings Right selection key To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key. See also “Standby mode,” p. 18. Navigation key To select shortcut functions for the scroll keys, select Menu > Settings > My shortcuts > Navigation key. Scroll to the desired key, and select Change and a function from the list. To remove a shortcut function from the key, select (empty) from the list of functions.
Settings Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. Add all or Remove all is not shown if all voice commands are active or inactive. ■ Connectivity You can connect the phone to a compatible device using an infrared, Bluetooth wireless technology, or USB data cable (CA-53 or DKU-2) connection. You can also define the settings for packet data dial-up connections.
Settings Bluetooth technology for the first time, you are asked to give a name for the phone. Use a unique name that is easy for others to identify. Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone. Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair.
Settings Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product. When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. To activate the IR port of your phone, select Menu > Settings > Connectivity > Infrared. To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared.
Settings Packet data connection Select Menu > Settings > Connectivity > Packet data > Packet data connection and from the following options: Always online to set the phone to automatically register to a packet data network when you switch on the phone. or indicates that the packet data service is available. If you receive a call or a text message, or make a call during a packet data connection, or indicates that the packet data connection is suspended (on hold).
Settings Partner list To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the partner is automatically added to the list, using the contact data from the other device. Server sync and PC sync are the original items in the list.
Settings Synchronize from a server To use a remote Internet server, you must subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10 and “Configuration,” p. 58. If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone.
Settings Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in “Security,” p. 59. Automatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Anykey answer > On — to set the phone to answer an incoming call by pressing any key except the power or end keys.
Settings Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and set the time. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Settings Default profile — to select the profile that you want to be automatically activated when you connect to the selected enhancement Automatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off. ■ Configuration You can configure your phone with settings that are required for certain services to function correctly.
Settings Personal config. settings — to add new personal accounts for various services, and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.
Settings Authority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See “Certificates,” p. 92. Security module settings — to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See also “Access codes,” p. 9. ■ Digital rights management Digital rights management (DRM) is copyright protection, designed to prevent modification and to limit distribution of protected files.
Settings Settings To allow or disallow phone software updates, select Menu > Settings > Configuration > Device manager settings > Service prov.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown, the other menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 90.
Gallery 11. Gallery In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in Gallery use a memory that mainly consists of the microSD card of your phone.
Media 12. Media You can take photos or record live video clips with the built-in 1.3 megapixel camera. ■ Camera The camera produces pictures in .jpg format, and you can digitally zoom up to four times. Take a photo 1. To open the camera viewfinder, select Menu > Media > Camera. If Video is selected as the default mode, select Options > Still image. To zoom in or out, press the volume key up or down, or scroll left or right. To take up to four photos in quick succession, select Options > Img. sequence on.
Media Camera settings Select Menu > Media > Camera > Options > Settings. You can define Image quality, Image size, Video clip quality, Video clip length, Camera sounds, Default title, Image and video storage, and Default mode. In Image and video storage you can select the folder or memory card to save your photos and video clips. This device supports the following video sizes: SubQCIF (128x96 pixels) and QCIF (176x144 pixels). ■ Video You can record video clips in .3gp format.
Media Send a video clip Select Menu > Media > Media player > Open Gallery > Video clips. Scroll to the video clip you want to send and select Options > Send. Select the format you want to use when sending the video clip, and select Send. ■ Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).
Media 3. Select Account and a streaming service account contained in the active configuration settings. ■ Music player Your phone includes a music player for listening to music tracks, recordings, or other .mp3, .mp4, or .aac format sound files that you have transferred to the phone with the Nokia Audio Manager application. .mp3 and .aac format files are stored in the memory card or in the Gallery folders.
Media Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection Track list — to view all the tracks available on the track list. To play a track, scroll to the desired track, and select Play. Select Options > Refresh all tracks or Change track list to refresh the track list (for example, after adding new tracks to the list) or to change the track list that is shown when you open the Music player menu, if several track lists are available in the phone.
Media To use the graphical keys , , , or right to the desired key, and select it. on the display, scroll left or Save radio channels 1. To start the channel search, select and hold or . To change the radio frequency in 0.05 MHz steps, briefly press or . 2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key. To save the channel to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3.
Media Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Set frequency — to enter the frequency of the desired radio channel You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.
Media List of recordings Select Menu > Media > Voice recorder > Options > Recordings list. The list of folders in the Gallery is shown. Open Recordings to see the list with recordings. Select Options to select options for files in the Gallery. See “Gallery,” p. 63. Define a storage folder To use another folder than Recordings as the default folder in Gallery, select Menu > Media > Voice recorder > Options > Select memory. Scroll to a folder, and select Set.
Push to talk 13. Push to talk Note: This feature may not be available in your product due to your subscription (network service). Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices.
Push to talk To disconnect from the PTT service, select Switch PTT off. ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls.
Push to talk Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key. You can also select the contact from Contacts. To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key.
Push to talk Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT address, and select Options > Send callback.
Push to talk • To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > Push to talk address. • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options.
Push to talk Receive an invitation When you receive an invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3. To set the status for the channel, select Active or Inactive. To reject the invitation, select View > Discard > Yes.
Push to talk PTT key default function — to select the default action of the PTTkey. You can set the key to open Contacts list or Channel list, or to make a PTT call to a selectedcontact, channel, or group.
Organizer 14. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organizer ■ Calendar Select Menu > Organiser > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
Organizer ■ To-do list To save a note for a task that you must do, select Menu > Organiser > To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, select Save and the priority, and set the deadline and alarm for the note. To view a note, scroll to it, and select View. You can also select an option to delete the selected note and delete all the notes that you have marked as done.
Organizer Options > Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number. For a total, select Equals. To start a new calculation, first select and hold Clear. Convert currency Select Menu > Organiser > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one.
Organizer Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times.
Applications 15. Applications ■ Games Besides the pre-installed games, the microSD card may contain games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key. For options related to a game, see “Application options,” p. 84. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown; see “Bookmarks,” p. 88.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application. Application access — to restrict the application from accessing the network. Different categories are shown.
Web 16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 86. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Home — to return to your start page Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts. Add bookmark — to save the page as a bookmark Bookmarks — to access the list of bookmarks. See “Bookmarks,” p. 88.
Web Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark, select Show > Save.
Web ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 91. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
Web To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service messages, select Service messages > On or Off.
Web Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu > Settings > Security > Security module settings.
Web Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign is shown, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown.
SIM services 17. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. Note: For availability, rates, and information on using SIM services, contact your SIM card vendor, for example, network operator, service provider, or other vendor.
PC connectivity 18. PC connectivity You can access the Internet when your phone is connected to a compatible PC through an IR, Bluetooth wireless technology, or USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service).
PC connectivity For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information protection of all persons, regardless of age and health. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Index Index A access codes 9 activation keys 60 active standby 46, 49 alarm clock 79 applications 84 audio messages 35 contacts 40 cookies 90 copyright protection 60 countdown timer 82 D barring password 10 battery 97 authentication 98 installation 12 Bluetooth 50 Bluetooth settings 51 bookmarks 88 browser 86 browser security 90 business cards 42 data cable USB 55 data communication 95 data transfer 53 date settings 48 dialed numbers 44 digital rights management 60 digital signature 93 downloading appl
Index indicators 20 info messages 36 infrared 51 IR port 18 K keyguard 21 keypad lock 21 L locking the keypad 21 log 44 loudspeaker 17 M maintenance 100 media player 66 memory card 13, 63 memory card slot 17 message center number 29 messages audio 35 counter 44 flash 34 multimedia 31 SMS e-mail 29 templates 34 text 29 multifunction key 17 multimedia messages 31 music player 67 mute 24 my numbers 43 N navigation key 49 network 7 notes 81 O on/off switching 15 operator logo 47 organizer 79 106 P packe
Index stopwatch 82 streaming service 66 synchronize 54 from PC 54 from server 55 T templates 30 text predictive 26 traditional 27 writing 26 text messages 29 themes 45 time settings 48 to-do list 81 traditional text input 27 U unlocking the keypad 22 updates 10 V vibrating alert 46 voice commands 49 voice dialing 23 voice messages 36 voice recorder 70 volume keys 18 W wallpaper 45, 47 Web 86 writing language 26 107
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use af t1 Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. af t1 2.
APPENDIX times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
APPENDIX What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
APPENDIX exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
APPENDIX key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
APPENDIX then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.
APPENDIX the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate.
