User Manual

Menu functions
97
Using the radio
When the radio is on, press Options and select
• Switch off to turn off the radio.
• Save channel to save the radio channel that you have found, refer to
Tuning a radio channel above. Up to 20 radio channels can be saved.
• Automatic tuning. Move the joystick up or down to start searching
upwards or downwards for channels. The search stops when a
channel has been found, press OK. To save the channel, see Save
channel above.
• Manual tuning. Move the joystick up or down to start searching
upwards or downwards for channels, or hold the joystick in the up or
down position to search for channels more quickly. To save the
channel, press OK and see Save channel above.
Tip: To quickly select Manual tuning, press when in the
Radio menu.
• Set frequency. If you know the frequency of the radio channel to
which you would like to listen (between 87.5 MHz and 108.0 MHz),
key it in and press OK. To save the channel, see the Save channel
option.
Tip: To quickly select Set frequency, press when in the
Radio menu.
• Delete channel. To delete a saved channel, scroll to the desired
channel, select Delete and OK.
• Rename. Key in a new name for the saved channel and press OK.
• Loudspeaker (or Headset) to listen to the radio through a
loudspeaker (or headset). Keep the headset connected to the phone
because the lead of the headset functions as the radio antenna. Note
that if you receive an incoming call, it is always routed to the
headset.
• Mono output (or Stereo output) to listen to the radio in mono (or in
stereo).
When you make a call or answer an incoming call while listening to the
radio, the radio is muted. When you end the call, the radio will
automatically be turned back on. You can also use other functions of the
rm-2_en1_FCC.fm Page 97 Monday, February 16, 2004 8:14 AM