User Manual

Menu functions

Press Menu and select Settings, More settings and Security settings.

Select

• PIN code request to set the phone to ask for your PIN code every time

the phone is switched on. Some SIM cards do not allow the PIN code

request to be turned off.

• Call barring service (network service) to restrict incoming calls to and

outgoing calls from your phone. A barring password is required.

• Fixed dialling to restrict your outgoing calls and text messages to

selected phone numbers if this function is supported by your SIM

card. The PIN2 code is required.

When the fixed dialling setting is on, GPRS connections are not

possible except while sending text messages over a GPRS

connection. In this case, the recipient’s phone number and the

message centre number must be included in the fixed dialling list.

• Closed user group. Closed user group is a network service that

specifies the group of people whom you can call and who can call

you. For more information, contact your network operator or service

provider.

• Security level. Select Phone and the phone will ask for the security

code whenever a new SIM card is inserted into the phone.

Select Memory to set the phone to request the security code when

the SIM card’s memory is selected and you want to change the

memory in use, see Selecting settings for contacts on page 70, or

copy from one memory to another, see Copying contacts on page 77.

• Access codes to change the security code, PIN code, PIN2 code or

barring password. Codes can only include numbers from 0 to 9.

Restore factory settings

To reset the menu settings to their original values, press Menu and

select Settings and Restore factory settings. Key in the security code and

press OK. Note that the data you have keyed in or downloaded, for

example the names and phone numbers saved in Contacts, are not

deleted.

rm-2_en1_FCC.fm Page 93 Monday, February 16, 2004 8:14 AM