User Manual

Menu functions
89
EGPRS modem settings
You can connect the phone to a compatible PC via infrared, Bluetooth
wireless technology or a data cable connection and use the phone as a
modem to enable EGPRS connectivity from the PC.
Press Menu and select Settings, Connectivity, GPRS and GPRS modem
settings. Select Active access point to activate the desired access point.
Select Edit active access point to change the access point settings.
• Scroll to Alias for access point and press Select. Key in the name that
you would like for the activated access point and press OK.
• Scroll to GPRS access point and press Select. Key in the Access Point
Name (APN) to establish a connection to an EGPRS network. Contact
your network operator for the APN.
You can also set the EGPRS dial-up service settings (Access Point Name)
on your PC using the Nokia Modem Options software, see PC Suite on
page 123. If you have set the settings on both your PC and on your
phone, note that the PC’s settings will be used.
More settings
Call settings
Press Menu and select Settings, More settings and Call settings. Select
• Call divert (network service) to direct your incoming calls, for
example to your voice mailbox number. Divert options that are not
supported by your SIM card or your network operator may not be
shown. Contact your service provider for details.
For example, select Divert if busy to divert your voice calls when your
number is busy or when you reject an incoming call.
To set the divert setting to on, select Activate and then select the
timeout after which the call is diverted, if this is available for the call
divert option. To set the call divert option to off, select Cancel. To
check whether the call divert is activated or not, select Check status
if this is available for the divert option. Several divert options may be
active at the same time.
To see the divert indicators in standby mode, see Essential indicators
in standby mode on page 26.
rm-2_en1_FCC.fm Page 89 Monday, February 16, 2004 8:14 AM