User Manual

Menu functions
88
• Save the EGPRS settings for each of the applications used over
EGPRS.
For information on pricing, contact your network operator or service
provider.
Note that when you have selected GPRS as a data bearer, the phone uses
EGPRS instead of GPRS if this is available in the network. You cannot
choose between EGPRS and GPRS but for some applications you may be
able to select either GPRS or GSM data (CSD, Circuit Switched Data).
EGPRS connection
Press Menu and select Settings, Connectivity, GPRS and GPRS
connection.
• Select Always online to set the phone to automatically register to an
EGPRS network when you switch the phone on. When the GPRS
connection is established, the indicator is shown on the top left of
the display.
When you start an application using EGPRS, the connection between
the phone and the network is established, and data transfer is
possible. When you end the application, the EGPRS connection is
ended but the registration with the EGPRS network remains.
If you receive a call or a text message, or make a call during a GPRS
connection, the indicator will be shown on the top right of the
display to indicate that the EGPRS connection has been suspended
(put on hold).
The GPRS and EGPRS connections are indicated by the same
indicators.
• If you select When needed, the EGPRS registration and connection
are established when required by an application using GPRS and
closed when you end the application.
Note that your phone supports three simultaneous EGPRS connections.
For example, depending on the network, you can simultaneously browse
xHTML pages, receive multimedia messages and have an ongoing PC
dial-up connection.
rm-2_en1_FCC.fm Page 88 Monday, February 16, 2004 8:14 AM