User Manual

Menu functions
81
availability status and My presence message to edit your status
message.
Tip: To quickly change the profile in standby mode, press the
power key , scroll to the profile that you want to activate
and press Select.
Chat and my presence settings
For the settings required for chat, contact your network operator or
service provider. To receive the chat and presence settings over the air,
see Over-the-air settings service on page 28.
Keying in the settings manually
1. Press Menu, and select Settings, Chat and my presence settings and
Current chat and presence settings.
2. Scroll to the set you would like to activate and press Activate.
You need to activate the connection set where you want to save the
settings. A connection set is a collection of settings required to make
a connection to the chat and presence services.
3. Select Edit current chat and presence sett..
Select each of the settings one by one and key in all the required
information that you have received from your network operator or
service provider. Note that the connection settings are in the
Connection settings menu.
Tone settings
You will find the same settings in the Profiles menu, see Profiles on page
80. Note that the settings you make will change the settings in the
active profile.
Press Menu and select Settings and Tone settings. Select
• Incoming call alert and select how the phone notifies you of an
incoming voice call.
• Ringing tone to select a tone for incoming voice calls. To select
ringing tones that have been saved in the Gallery, select Open gallery
from the ringing tone list.
rm-2_en1_FCC.fm Page 81 Monday, February 16, 2004 8:14 AM