User Manual

Menu functions
65
If all available settings are full, the phone asks if you want to replace
an existing set. Accept the replacement and select the set to be
replaced.
The existing sets are located in the Messages, E-mail, Connect via
menu.
The phone asks if you want to activate the saved settings. Accept the
activation if you want to use the new settings.
• To view the received settings first, select View.
• To discard the received settings, select Discard.
If the OMA provisioning service is not available, you can also key in the
settings manually. Press Menu and select Messages, Message settings,
and E-mail messages.
• First select Active e-mail settings and activate the set in which you
want to save the settings. Select Edit active e-mail settings and edit
the active settings.
Select each of the settings one by one and key in all the required
settings. Contact your network operator or e-mail service provider
for the settings.
• Mailbox name. Key in the name that you want to use for the
mailbox. You can use any name.
• E-mail address. Key in your e-mail address.
• My name. Key in your name or nickname. Your name and e-mail
address will be shown.
• Outgoing (SMTP) server. Key in the server address.
• Incoming server type. Select either POP3 or IMAP4 depending on
the type of e-mail system that you are using. If both types are
supported, select IMAP4. Changing the server type also changes
the incoming port number.
• If you have selected POP3 as a server type, then Incoming (POP3)
server, POP3 user name and POP3 password are shown. If you
have selected IMAP4 as a server type, then Incoming (IMAP4)
server, IMAP4 user name and IMAP4 password are shown. Key in
the e-mail server address for incoming e-mail, then key in the
user name and password to access the e-mail account. If you
rm-2_en1_FCC.fm Page 65 Monday, February 16, 2004 8:14 AM