Nokia 6136 User Guide - FCC Draft 1
LEGAL INFORMATION DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-199 is in conformity with the provisions of the following Council Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
The information contained in this user guide was written for the Nokia 6136 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice. UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS.
Contents Contents 1. General information ............. 8 2. Get started ......................... 11 3. Your phone......................... 17 4. Call functions..................... 23 5. Phone menus...................... 26 6. Messaging .......................... 27 7. Contacts ............................. 46 8. Call log ............................... 52 9. Settings .............................. 53 10. Operator menu................ 71 11. Gallery.............................. 72 12. Media..............
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information 1. General information Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see ”Security,” p. 68.
General information If the codes are not supplied with the SIM card, contact your service provider for the codes. Call barring password The call barring password (four digits) is required when using Call barring service. See ”Security,” p. 68. You can obtain the password from your service provider. If you enter an incorrect call barring password three times in succession, the password is blocked. Contact your service provider for assistance. ■ Nokia support and contact information Check www.nokia.
General information settings. For more information on availability of the settings, contact your service provider. When you have received a configuration message, Configuration sett. received is displayed. To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider who supplies the settings.
Get started 2. Get started ■ SIM card and battery installation Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. Before installing the SIM card and removing the battery, always switch the device off, and disconnect the charger.
Get started 5. Swing the SIM card holder closed. The gold-colored contacts on the SIM card meet the gold-colored contacts on the inside of the phone. Gently press the SIM card holder into the phone until it clicks into place. 6. Replace the battery by positioning it (with the label side facing up) so the gold-colored contacts match up with those on the phone. Slide the battery in until it snaps into place. 6 7. Slide the back cover until it locks into place.
Get started You can use the phone while the charger is connected. The charging time depends on the charger and the battery used. For example, charging a BL-4C battery with the AC-4 charger takes approximately 1 hour and 10 minutes while the phone is in the standby mode. ■ Memory card installation Use only compatible microSD cards with this device. Other memory cards do not fit in the memory card slot and are not compatible with this device.
Get started You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in the Gallery. To remove the memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder and swing the holder open. Push with a fingernail to loosen the memory card from the holder; then, pull the card out. Close the memory card holder. To format the memory card, see ”Format memory card,” p. 72.
Get started ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
Get started ■ Wrist strap Remove the back cover from the phone and thread the wrist strap as shown in the picture.
Your phone 3.
Your phone key (long key press) and Push to talk (PTT) is activated by volume up key (long key press) (16) ■ Standby mode When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone.
Your phone Active standby mode In the active standby mode, the phone can display separate content item windows, such as general indicators and and operator logo (1), shortcuts (2), audio functions (3), and the calendar (4). To select whether the active standby is shown, see Active standby in ”Standby mode settings,” p. 54. The active standby is in passive mode when the middle selection key (5) is Menu; you can only view content.
Your phone Timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts To access the list of dialed numbers, press the call key once. See ”Make a call,” p. 23.
Your phone You have unsent, canceled, or failed messages in the Outbox folder. The phone registered a missed call. You have received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The alarm clock is set to On. The phone does not ring for an incoming call or text message. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network.
Your phone • To unlock the keypad, select Unlock and press * within 1.5 seconds. If the Security keyguard is set to On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number and press the call key. For information about Security keyguard, see ”Phone,” p.
Call functions 4. Call functions ■ Make a call 1. Enter the phone number, including the area code. To delete an incorrect character, select Clear. For international calls, press * twice for the international prefix (the + character replaces the international access code); and then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3.
Call functions Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. 2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown.
Call functions To increase or decrease the volume during a call, press the volume up or down key on the side of the phone. Select Options during a call and the following options may be available.
Phone menus 5. Phone menus Phone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and customize phone features. Scroll to access these menus and submenus. Some menus may not be available, depending on your network. For more information, contact your service provider. ■ Menu views Your phone may have two types of menu views: List and Grid.
Messaging 6. Messaging You can use mobile messages to keep in touch with friends, family, and business associates by using the short message service (SMS), which is a network service. Not all messaging features are available in all wireless networks. Contact your service provider for availability and subscription information. When sending messages, your phone may display the words Message sent.
Messaging When you write text, appears at the top left of the display, indicating predictive text input, and is displayed, indicating traditional text input. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode. Settings To set the writing language to a language other than that selected, select Options > Writing language.
Messaging To access the most common punctuation marks and special characters, press 1. To insert a space, press 0. If you want more characters, press *. Write and send 1. Select Menu > Messaging > Create message > Text message, and enter the recipient’s phone number in the To: field. 2. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the contacts you want one by one. 3.
Messaging 4. Scroll down and enter a message in the Message: field. See ”Text entry,” p. 27. If you want to change the message type for your reply message, select Options > Change msg. type. 5. To send the message, select Send. ■ SIM messages SIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory. To read SIM messages, select Menu > Messaging > Options > SIM messages.
Messaging Write and send The wireless network may limit the size of multimedia messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. To set the settings for multimedia messaging, see ”Multimedia,” p. 44. To check availability and to subscribe to the multimedia messaging service, contact your service provider. 1. Select Menu > Messaging > Create message > Multimedia. 2. Enter a message. See ”Text entry,” p. 27.
Messaging Note: When the phone is sending the message, the animated is shown. Actual receipt of a message depends on a number of factors. For more details about messaging services, check with your service provider. It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times.
Messaging Memory full When you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive msgs. is shown. To delete old messages, select OK > Yes and the folder. Scroll to the message you want, and select Delete. If you want to delete more than one message at the same time, scroll to one of the messages you want to delete and select Options > Mark.
Messaging Receive a flash message A received flash message is indicated with Message:, followed by a few words from the beginning of the message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. ■ Nokia Xpress audio messaging You can use the multimedia message service to create and send voice messages conveniently. Multimedia messaging service must be activated before you can use audio messages.
Messaging ■ Instant messaging You can take text messaging to the next level by experiencing instant messaging (IM) (network service) in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the Internet) they are using, as long as you all use the same instant messaging service.
Messaging Login — to connect to the IM service. To set the phone to automatically connect to the IM service when you switch on the phone in the login session, scroll to Automatic login: and select Change >On, or select Menu > Messaging > Instant messages, connect to the IM service, and select Settings > Automatic login > On phone start-up. Saved convers. — to view, erase, or rename the conversations that you saved during an IM session Connect.
Messaging To start a conversation, expand the Online or Offline folder and scroll to the contact with whom you want to chat and select Chat. To answer an invitation or to reply to a message, expand the Conversations folder and scroll to the contact with whom you want to chat and select Open. To add contacts, see ”Add IM contacts,” p. 38. Groups > Public groups (dimmed if groups are not supported by the network) — the list of bookmarks to public groups provided by the service provider is displayed.
Messaging Participate in a conversation To join or start an IM session, write your message; and select Send, or press the call key. Select Options to view the available options. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. Write your message; and select Send, or press the call key. Your message is displayed, and the reply message is displayed below your message. Add IM contacts 1.
Messaging Public You can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups.
Messaging Write and send 1. Select Menu > Messaging > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, and select OK. 3. Write a subject for the e-mail, and select OK. 4. Enter the e-mail message. See ”Text entry,” p. 27. To attach a file to the e-mail, select Options > Attach and the file you want from the Gallery. 5. To send the e-mail message immediately, select Send > Send now. To save the e-mail in the Outbox folder to be sent later, select Send > Send later.
Messaging 3. Confirm or edit the e-mail address and subject; then write your reply. To send the message, select Send > Send now. Inbox and other folders Your phone saves e-mails that you have downloaded from your e-mail account in the Inbox folder. Other folders contains the following folders: Drafts for saving unfinished e-mails, Archive for organizing and saving your e-mails, Outbox for saving e-mails that have not been sent, and Sent items for saving e-mails that have been sent.
Messaging ■ Info messages With the Info messages network service, you can receive short text messages from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. ■ Service commands Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands. Select Menu > Messaging > Service commands.
Messaging Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder Overwriting in Sent items — to select if overwriting takes place when messages are sent and the message memory is full Font size — to select the font size used in messages Graphical smileys > Yes — to set the phone to replace character-based smileys with graphical ones Text messages The text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages.
Messaging Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network service) Multimedia The multimedia message settings affect the sending, receiving, and viewing of multimedia messages. You may receive the configuration settings for multimedia messaging as a configuration message. See ”Configuration settings service,” p. 9. You can also enter the settings manually. See ”Configuration,” p. 68.
Messaging You may receive the configuration settings for the e-mail application as a configuration message. See ”Configuration settings service,” p. 9. You can also enter the settings manually. See ”Configuration,” p. 68. To activate the settings for the e-mail application, select Menu > Messaging > Message settings > E-mail messages and one of the following options: Configuration — Select the set that you want to activate. Account — Select an account provided by the service provider.
Contacts 7. Contacts In Contacts, you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of the phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . ■ Search Select Menu > Contacts > Names and scroll though the list of contacts or enter the first letter of the name you are trying to find.
Contacts 5. To search for an ID from the server of your service provider (if you have connected to the presence service), select User ID > Search. See ”My presence,” p. 48. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually, enter the ID and select OK. 6. To change the number type, scroll to the number you want, and select Options >Change type.
Contacts Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from the Gallery. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia, Via text message, or Via infrared.
Contacts Settings > Show current pres. in standby, Connection type, or IM and my presence settings ■ Subscribed names You can create a list of contacts for whom you want presence status information available. You can view the information, if it is allowed by the contacts and the network. To view these subscribed names, scroll through the contacts, or use the Subscribed names menu. Ensure that the memory in use is Phone or Phone and SIM.
Contacts 2. Select Options > View details to view the details of the selected contact; or select Options > Subscribe new, Send message, Send bus. card, or Unsubscribe. Unsubscribe To unsubscribe a contact from the Contacts list, select the contact and Options > Unsubscribe > OK. To unsubscribe from the Subscribed names menu, see ”View,” p. 49. ■ Settings Select Menu > Contacts > Settings and one of the following options: Memory in use — to select the SIM card or phone memory for your contacts.
Contacts ■ Service and my numbers Select Menu > Contacts and one of the following options: Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service) My numbers — to view the phone numbers assigned to your SIM card. This is only shown if the numbers are included on your SIM card.
Call log 8. Call log The phone registers the phone numbers of identified missed, received, and dialed calls, and the approximate length of your calls. The phone registers missed and received calls only if the network supports these functions, and the phone is turned on and within the network’s service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers.
Settings 9. Settings Use this menu to set or change your profiles, themes, personal shortcuts, time and date settings, WLAN/Wi-Fi settings, call settings, phone settings, main display settings, mini display settings, tone settings, enhancement settings, configuration settings, security settings, and to restore factory settings. ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments.
Settings Select Menu > Settings > Tones. and edit the available settings. You can find the same settings when you personalize a profile in the Profiles menu. See ”Profiles,” p. 53. To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for:. Scroll to the caller group you want or All calls, and select Mark. ■ Display With display settings, you can personalize your display view of the phone.
Settings Cell info display > On — to receive information from the network operator depending on the network cell used (network service). Screen saver To select a screen saver, select Gallery > Menu > Settings > Main display > Screen saver > Screen savers > Image, Slide set, Open Camera, Video clip, Analogue clock or Digital clock. To download more screen savers, select Graphic downloads. To enter the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On.
Settings Power saver To save some battery power, select Menu > Settings > Mini display > Power saver > On. A digital clock is displayed when no function of the phone is used after a certain period of time. Fold animation To select whether an animation is shown when opening and closing the fold, select Menu > Settings > Mini display > Fold animation > On. The fold animation is only visible if it is supported by and selected from the active theme set in your phone. See ”Themes,” p. 53.
Settings function. When you have completed rearranging the functions you want, select Done > Yes. Right selection key To set a specific function (from a predefined list) to the right selection key, select Menu >Settings > My shortcuts > Right selection key. This function can be used only if it is supported by your service provider. Navigation key This key allows you to scroll up, down, left, and right.
Settings ■ Connectivity You can connect the phone to compatible devices, using an infrared, or a USB data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections. WLAN/Wi-Fi Note: Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information. This device can detect and connect to a wireless local area network (WLAN) through call over local access (UMA).
Settings time you turn on the phone. Select No to prevent the first message from appearing every time you turn on the phone. To see the tutorial any time you want, select Menu > Applications > Collection > Tutorial. To exit the tutorial at any time, select Exit. Turn on WLAN/Wi-Fi Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio > On. Quick connection Quick connection allows you to connect to an open network with the best signal strength. 1.
Settings 3. Scroll to the network you want and select Connect. A message confirming network connection is displayed. If you have not saved the network, a message asks if you want to save it. 4. Select Yes to save the network or No to not save the network. 5. To save an available network to which you have not connected, select Options > Save. 6. To update the list of available networks, select Options > Refresh. Or if the list of available networks is empty, select Refresh. 7.
Settings Each saved network has its individual connection settings, which offer different ways to connect to the network. Scroll to the network you want and select Options > Conn.
Settings Turn off WLAN/Wi-Fi while connected Select Menu > Settings > Connectivity > Wi-Fi > Wi-Fi radio > Off > Yes. Connection failure You may not be able to connect to the network at times. Try connecting to the network later, as this may be only a temporary error. If the connection still fails, contact your service provider. Login failure If you attempt to login to a network without a UMA subscription, Contact your service provider is displayed.
Settings Packet data General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP) based network. GPRS is a data bearer that enables wireless access to data networks such as the Internet. Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS or GPRS and data transfer speed, contact your network operator or service provider.
Settings name (APN) to establish a connection to an EGPRS or GPRS network, and select OK. You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using the One Touch Access software. See ”Nokia PC Suite,” p. 100. If you have set the settings both on your PC and on your phone, the PC settings are used.
Settings Synchronize from a compatible PC To synchronize data from calendar, notes, and contacts from a compatible PC, use an infrared or a USB data cable connection. You also need the correct version of Nokia PC Suite software for your phone installed on the PC. See ”Computer connectivity,” p. 100 for information about Nokia PC Suite. Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC.
Settings Call divert — to divert your incoming calls (network service). Call divert and call barring cannot be active at the same time. See Call barring service in ”Security,” p. 68. Anykey answer > On — to answer an incoming call by briefly pressing any key, except the left and right selection keys, or the end key. Answer when fold is opened > On — to set your phone to answer a call when you open the fold. If the setting is off, you must press the call key after you open the fold.
Settings Flight query — to set the phone to ask if Flight mode should be used each time the phone is turned on. In Flight mode, all radio connections are turned off. Flight mode should be used in areas sensitive to radio emissions. Welcome note — to create the welcome note you would like to be shown briefly when the phone is turned on Phone updates — to update the phone software when an update is available and if these updates are supported by your service provider. See ”Phone software updates,” p. 69.
Settings Text phone > Use text phone > Yes — to use text phone settings instead of headset settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly. The services are multimedia messaging, instant messaging, synchronization, e-mail application, streaming, push to talk, and browser. Your service provider may also send you these settings as a configuration message.
Settings PIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off. Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A password is required.
Settings Settings To select whether to allow phone software updates initiated by your service provider, select Menu > Settings > Configuration > Device manager settings > Service provider software updates and one of the following options: Always allow — to perform all software downloads and updates automatically Always reject — to reject all software updates Confirm first — to perform software downloads and updates only after your confirmation (default setting) Depending on your settings, you will be notif
Operator menu 10. Operator menu Your service provider may have programmed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information.
Gallery 11. Gallery In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in the Gallery use a memory that may have a capacity of approximately 8 MB in the phone.
Media 12. Media ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GPP format. The camera lens is on the front of the phone. The color display and the mini display on the front of the phone work as a viewfinder. When taking and using images or video clips, obey all laws and respect local customs, as well as privacy and legitimate rights of others. Take a photo 1.
Media This Nokia device supports an image capture resolution of 1280 x 1024 pixels. The image resolution in these materials may appear different. Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause recording, select Pause; to resume recording, select Continue. To stop recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options.
Media phone with the Nokia Audio Manager application. Music files are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player. The details of the first track on the default track list are shown. 2. To play a track, scroll to the track that you want, and select 3. To skip to the beginning of the next track, select of the previous track, select twice. . . To skip to the beginning 4. To rewind the current track, select and hold .
Media Memory status — to view the free and used memory capacity ■ Radio The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Note: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Select Menu > Media > Radio. To use the graphical keys , , , or the phone display, scroll left or right to the key you want and select it.
Media Visual Radio sett. — to select the options for Visual Radio. To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual service > Automatically. Stations — to select the list of saved channels. To delete or rename a channel, scroll to the channel you want, and select Options > Delete station or Rename.
Media 5. To send the last recording using infrared or as a multimedia message, select Options > Send last recorded. List of recordings 1. Select Menu > Media > Recorder > Options > Recordings list. The list of folders in the Gallery is shown. 2. Open Recordings to see the list with recordings. 3. Select Options to select options for files in the Gallery. See ”Gallery,” p. 72.
Push to talk 13. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the volume up key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
Push to talk When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person. Press and hold the volume up key the entire time you are talking, and hold the phone in front of you so that you can see the display. When you are finished, release the volume up key. Talking is allowed on a first come, first served basis. When someone stops talking, the first person to press the key used for PTT can talk next.
Push to talk To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the contact you want, and press the volume up key. Make a PTT call to multiple recipients You can select multiple PTT contacts from the contact list. The recipients receive an incoming call and must accept the call to participate. Select Menu > Push to talk > Contacts list, and mark the contacts you want. To make the call, press the volume up key.
Push to talk • To send a callback request from the callback request list in the Push to talk menu, select Callback inbox. Scroll to a contact, and select Options > Send callback. Respond to a callback request When you receive a callback request, Callback request received is displayed in the standby mode. Select View. The list of contacts who have sent you callback requests is displayed. • To make a one-to-one call, press the volume up key.
Push to talk Public channel — Every channel member can invite other persons. Private channel — Only persons who receive an invitation from the channel creator can join in. Add a channel To add a public or private channel, select Menu > Push to talk > Add channel, and edit the settings in the form fields: Channel status: — Select Active or Inactive. Chnl. nickname: — Enter your nickname for the channel. Chnl. security: — Select Public channel or Private channel.
Push to talk Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations that support the PTT service are shown. Account — to select a PTT service account in the active configuration settings. You can also select from other available options. To edit the PTT settings for use, select Menu > Push to talk > PTT settings, and one of the following options: 1 to 1 calls > On — to set the phone to allow the reception of one-to-one calls.
Organiser 14. Organiser Your Nokia mobile phone has many useful features for organizing your everyday life. The following features are found in Organiser: alarm clock, calendar, to-do list, notes, countdown timer, and stopwatch. ■ Alarm clock The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off if there is enough power in the battery. To set the alarm, select Menu > Organiser > Alarm clock > Alarm time, and enter the alarm time.
Organiser Select Menu > Organiser > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view and Options > Delete all notes.
Organiser Options You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note as a text message or a multimedia message to another phone, save a note as a calendar note, or access the calendar. While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.
Organiser within 60 seconds. To stop the alarm and to delete the note text, select Exit. To restart the countdown timer, select Restart. ■ Stopwatch You can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.
Applications 15. Applications ■ Games Your phone software includes some games. Launch Select Menu > Applications > Games, scroll to the game you want, and select Open. For options related to a game, see ”Other application options,” p. 89. Downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from the Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions. Web page — to provide further information or additional data for the application from an Internet page (network service).
Web 16. Web Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. Many wireless mobile Internet access features are network-dependent, and some features may not be available. Contact your service provider for more information. ■ Technology background A technology called wireless application protocol (WAP) is to mobile devices what the world wide web (WWW) is to personal computers.
Web the service that you want to use. See ”Configuration settings service,” p. 9. You can also enter all the configuration settings manually. See ”Configuration,” p. 68. Activate the settings Ensure that the Web settings of the service you want to use are activated. 1. Select Menu > Web > Settings > Configuration settings > Configuration. Only the configurations that support the browsing service are shown. 2. Select a service provider or Personal config. for browsing. 3.
Web (on hold). After a call, the phone tries to reconnect the EGPRS or GPRS connection. Phone keys • To browse through the page, press the scroll key in any direction. • To select a highlighted item, press the call key. • To enter letters and numbers, press the keys, 0 to 9. • To enter special characters, press *. Options Beside the options available on your device, your service provider may offer other options. Direct calling The browser supports functions that you can access while browsing.
Web Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a web page created in a foreign language. Screen size > Full or Small— to set the screen layout JavaScript > Enable — to enable the Java scripts ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See ”Cache memory,” p. 95.
Web Receive When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. The received bookmark is saved automatically to Bookmarks. To view it, select Show > Bookmarks. ■ Download settings To automatically save all downloaded files in the Gallery, select Menu > Web > Settings > Downloading settings > Automatic saving > On. ■ Service inbox The phone is able to receive service messages (pushed messages) sent by your service provider (network provider).
Web empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache, while browsing, select Options > Other options > Clear the cache. To empty the cache, while in the standby mode, select Menu > Web > Clear the cache. ■ Browser security Security features may be required for some services, such as online banking or shopping. For such connections, you need security certificates and possibly a security module, which may be available on your SIM card.
Web Certificates Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Web If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Select the user certificate you want to use. Enter the signing PIN (see ”Access codes,” p. 8), and select OK.
SIM services 17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates, and information on using SIM services, contact your service provider. To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM service actions > Yes.
Computer connectivity 18. Computer connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an infrared, or a USB data cable (CA-53) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ USB data storage You can use the USB data cable to transfer data between the memory card inserted in the phone and a compatible PC. See ”USB data cable,” p. 65.
Enhancements 19. Enhancements If you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs. Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-4 charger. Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model.
Reference information 20. Reference information ■ Battery information Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Reference information Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
Reference information What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.
Reference information Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Pacemakers Pacemaker manufacturers recommend that a minimum separation of 15.
Reference information bag deployment area. If in-vehicle wireless equipment is improperly installed, and the air bag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
Reference information If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Reference information ■ Talk and standby times This section provides information about battery talk times, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider. Operation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
Index Index D A access codes 8 active standby 19, 57 alarm clock 85 antenna 15 B battery charge 12 strength indicator 18 bookmarks 94 browser 92 business cards 48 C calendar 85 call answer 24 end 23 log 52 make 23 options 24 reject 24 voice mail 41 waiting 24 camera lens 17 use 73 contacts add 46 copy 47 delete 47 delete details 47 edit 47 memory in use 50 my numbers 51 search 46 service numbers 51 110 dialing 23 downloads content and applications 10 settings 95 E emergency calls 106 enhancements 101
Index O T operator logo 54 menu 71 text entry 27 themes 53 to-do list 86 P U phone software updates 70 plug and play service 14 profiles 53 PTT.
Index NOTES 112
