Nokia 6085 User Guide DRAFT 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-198 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product endof-life.
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See . The information contained in this user guide was written for the Nokia xxxx product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.
Contents Contents For your safety.......................... 6 General information................. 9 Access codes............................................ 9 Copyright protection.......................... 10 Configuration settings service ........ 10 Download content and applications 11 Nokia support and contact information........................................... 11 1. Get started ......................... 12 SIM card and battery installation .. Charge the battery..............................
Contents Phone software updates ................... 70 9. Operator menu................... 72 10.Gallery............................... 73 Format memory card.......................... 73 11.Media ................................ 74 Camera................................................... Media player......................................... Music player ......................................... Radio....................................................... Recorder.........................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information Congratulations on your purchase of this Nokia mobile phone. Some of its other features include a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 69.
General information PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (eight digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your service provider for the codes. Barring password The barring password (four digits) is required when using Call barring service. See “Security,” p. 69.
General information default configuration settings. Otherwise, the phone asks, Activate saved configuration settings? To discard the received settings, select Show > Discard. To edit the settings, see “Configuration,” p. 68. ■ Download content and applications You may be able to download content, such as themes, tones, and video clips, to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions.
Get started 1. Get started ■ SIM card and battery installation Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. Before installing the SIM card and removing the battery, always switch the device off, and disconnect the charger.
Get started 3. Place a fingernail in the middle of the metal SIM card holder. Then, unlatch and swing the SIM card holder open. 4. Insert the SIM card into the holder as shown, beveled corner first, with the gold-colored contacts on the SIM card face up (away from the phone). 5. Swing the SIM card holder closed. The gold-colored contacts on the SIM card meet the gold-colored contacts on the inside of the phone. Gently press the SIM card holder into the phone until it clicks into place. 6.
Get started 1. Connect the charger to a standard wall outlet. 2. Insert the charger plug into the round jack in the bottom of the phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. 3. Disconnect the charger from the phone when the battery is fully charged. You can use the phone while the charger is connected. The charging time depends on the charger and the battery used.
Get started To insert a memory card, use a fingernail as a lever, place it in the recessed area of the memory card holder and swing the holder open (1). Place the memory card in the card holder (2). Make sure that the memory card is properly inserted and that the gold-colored contacts on the card are facing upwards. Close the memory card holder (3). DRAFT You can use the memory card to save your multimedia files, such as video clips, sound files, and images, in the Gallery.
Get started your service provider (network service). Confirm or reject the query. See Connect to service provider support in “Configuration,” p. 68 and “Configuration settings service,” p. 10. ■ Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. DRAFT ■ Normal operating position Use the phone only in its normal operating position.
Get started Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
Your phone 2.
Your phone volume down key (long key press) and Push to talk (PTT) is activated by volume up key (long key press) (16) ■ Standby mode When you turn on your phone, the first screen that appears is the start screen, which indicates your phone is in the standby mode. When your phone is in the standby mode, the selection keys access specific functions, and the indicators appear on the start screen. Indicators show the status of the phone.
Your phone Active standby mode In the active standby mode, the phone can display separate content item windows, such as general indicators and operator logo (1), shortcuts (2), audio functions (3), and the calendar (4). To select whether the active standby is shown, see Active standby in “Standby mode settings,” p. 56. The active standby is in passive mode when the middle selection key (5) is Menu; you can only view content.
Your phone Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name, and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts To access the list of dialed numbers, press the call key once. See “Make a call,” p. 24.
Your phone The phone registered a missed call. You have received one or several instant messages, and you are connected to the instant messaging service. The keypad is locked. The alarm clock is set to On. The phone does not ring for an incoming call or text message. The countdown timer is running. The stopwatch is running in the background. / The phone is registered to the GPRS or EGPRS network. / A GPRS or EGPRS connection is established.
Your phone • To enable automatic keyguard, select Menu >Settings > Phone > Automatic keyguard > On. Set the delay in minutes and seconds in which the keypad locks. If the Security keyguard is set to On, enter the security code if requested. To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. To delete an incorrect character, select Clear. For international calls, press * twice for the international prefix (the + character replaces the international access code); and then enter the country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. 3.
Call functions Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. 2. Say the voice command clearly.
Call functions ■ Options during a call Many of the options that you can use during a call are network services. For availability, contact your service provider. To increase or decrease the volume during a call, press the volume up or down key on the side of the phone. Select Options during a call and the following options may be available.
Phone menus 4. Phone menus Phone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and personalize phone features. Scroll to access these menus and submenus. Some menus may not be available, depending on your network. For more information, contact your service provider. ■ Menu views Your phone may have two types of menu views: List and Grid.
Messaging 5. Messaging You can use mobile messages to keep in touch with friends, family, and business associates by using the short message service (SMS), which is a network service. Not all messaging features are available in all wireless networks. Contact your service provider for availability and subscription information. When sending messages, your phone may display the words Message sent.
Messaging repeatedly until the character you want is displayed. In predictive text input you can enter a letter with a single key press. When you write text, appears at the top left of the display, indicating predictive text input, and is displayed, indicating traditional text input. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode.
Messaging on the key. The characters available depend on the selected writing language. See “Settings,” p. 29. If the next letter you want is located on the same key as the present one, wait until the cursor is displayed, or press any of the navigation keys, and enter the letter. To access the most common punctuation marks and special characters, press 1. To insert a space, press 0. If you want more characters, press *. Write and send 1.
Messaging 2. While reading a message, select Options, and delete or forward the message, edit the message as a text message or an SMS e-mail or move it to another folder, or view or extract message details. You can also copy text from the beginning of the message to your phone calendar as a reminder note. 3. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message. To send a text message to an e-mail address, enter the e-mail address in the To: field. 4.
Messaging • Sound: AMR audio • Video clips: 3GPP and 3GPP2 formats or MPEG video and AMR audio. The phone may not support all variations of the file formats. You cannot receive multimedia messages during a call or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications. Write and send a multimedia message The wireless network may limit the size of multimedia messages.
Messaging To retrieve the contacts to which you recently sent messages, select Add > Recently used. Message sending When you finish writing your message, to send the message, select Send, or press the call key. The phone saves the message in the Outbox folder, and sending starts. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See “General settings,” p. 46. Note: When the phone is sending the message, the animated is shown.
Messaging To view the files in the presentation or the attachments, select Options > Objects or Attachments. 3. To reply to the message, select Options > Reply > Text message, Multimedia, Flash message, or Audio message. Write the reply message. If you want to change the message type for your reply message, select Options > Change msg. type. The new message type may not support all the content that you have added. 4. To send the message, select Send. See “Message sending,” p. 33.
Messaging scroll to the folder you want, and select Options > Delete folder or Rename folder. Your phone has templates. To create a new template, save or copy a message as a template. To access the template list, select Menu > Messaging > Saved items > Templates. Flash messages Flash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved. Write a flash message Select Menu > Messaging > Create message > Flash message.
Messaging To send the message to multiple recipients, add the contacts you want one at a time. To send the message to persons in a group, select Contact group and the group you want. To retrieve the contacts to which you recently sent messages, select Add > Recently used. 5. To send the message, select Send. Receive an audio message When your phone receives audio messages, either 1 audio message received, or N messages received is displayed, where N is the number of new messages.
Messaging While you are connected to the instant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger. Register with an instant messaging service You can do this by registering over the Internet with the IM service provider you have selected to use.
Messaging Connect To connect to the instant messaging service, access the Instant messages menu, select the instant messaging service, if needed, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Options > Logout. Sessions When connected to the instant messaging service your status as seen by others is shown in a status line: Status: Online, My status: Busy or Status: App. off.
Messaging Conversations folder and scroll to the contact to whom you would like to chat and select Open. To add contacts, see “Add IM contacts,” p. 40. Groups > Public groups (not visible if groups are not supported by the network) — the list of bookmarks to public groups provided by the service provider is displayed. To start a instant messaging session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as your nickname in the conversation.
Messaging new contact that is not in the phone memory, select Options > Save contact. Participate in a conversation To participate in a conversation, write your message; and select Send, or press the call key. Select Options to view the available options. If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone. Write your message; and select Send, or press the call key.
Messaging server of the service provider. If the server you are logged into does not support group services, all group-related menus are dimmed. Public You can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group.
Messaging • Check your e-mail settings with your network operator or e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 68. To edit the e-mail settings, select Menu > Messaging > E-mail > Options > Manage accounts. This application does not support keypad tones.
Messaging To save the e-mail in the Outbox folder to be sent later, select Send > Send later. To edit or continue writing your e-mail later, select Options > Save as draft. The e-mail is saved in Outboxes > Drafts. To send the saved e-mail from the outbox, select Menu > Messaging > E-mail > Options > Send now or Send/check e-mail. Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail.
Messaging E-mail folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: “Account name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent.
Messaging ■ Info messages With the Info messages network service, you can receive short text messages from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. ■ Service commands Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands.Select Menu > Messaging > Service commands.
Messaging ■ Message settings General settings General settings are common for text and multimedia messages.
Messaging Messages sent via > Text > Paging, or Fax— to select the format of the messages to be sent (network service). Use packet data > Yes — to set GPRS as the preferred SMS bearer Character support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. When writing a message, you can check how the message will look to the recipient by previewing the message. See “Write and send,” p. 30.
Messaging Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No, or Incoming multimedia messages is set to Reject. Configuration settings > Configuration — only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings.
Contacts 6. Contacts In Contacts, you can store and manage contact information, such as names, phone numbers, and addresses. You can save names and numbers in the internal memory of the phone, the SIM card memory, or in a combination of the two. Names and numbers saved in the SIM card memory, are indicated by . ■ Search Select Menu > Contacts > Names and scroll through the list of contacts or enter the first letter of the name you are trying to find.
Contacts 5. To change the number type, scroll to the number you want, and select Options > Change type. To set the selected number as the default number, select Set as default. 6. Enter the number or text item; to save it, select Save. 7. To return to standby mode, select Back > Exit. ■ Copy a contact Search for the contact you want to copy, and select Options > Copy contact. You can copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa.
Contacts ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send bus. card > Via multimedia, Via text message, or Via Bluetooth. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.
Contacts Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. To make a call using speed dialing, see “Speed dialing,” p. 24.
Call log 7. Call log The phone registers the phone numbers of identified missed, received, and dialed calls, and the approximate length of your calls. The phone registers missed and received calls only if the network supports these functions, and the phone is turned on and within the network’s service area. To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers.
Call log To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings 8. Settings Use this menu to set or change your profiles, themes, personal shortcuts, time and date settings, call settings, phone settings, main display settings, mini display settings, tone settings, enhancement settings, configuration settings, security settings, and to restore factory settings. ■ Profiles Your phone has various setting groups, called profiles, for which you can personalize the phone tones for different events and environments. Select Menu > Settings > Profiles and a profile.
Settings ■ Tones You can change the settings of the selected active profile. Select Menu > Settings > Tones. and edit the available settings. You can find the same settings when you personalize a profile in the Profiles menu. See “Profiles,” p. 55. To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Alert for:. Scroll to the caller group you want or All calls, and select Mark.
Settings Standby mode font colour — to select the color for the texts on the display in the standby mode Navigation key icons — to set the scroll key icons that are shown in the standby mode Fold animation — to select whether an animation is shown when you open and close the fold. The fold animation is only visible if it is supported by and selected from the active theme set in your phone. See “Themes,” on p. 55. Operator logo — to set your phone to display or hide the operator logo.
Settings Screen saver Select Menu > Settings > Mini display > Screen saver >Screen savers > Analogue clock or Digital clock . To enter the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On. ■ Time and date Select Menu > Settings > Time and date and one of the following options: Clock — to set the phone to show or hide the clock in the standby mode, adjust the clock, and select the time zone and the time format.
Settings process, if you want to move another function. When you have completed rearranging the functions you want, select Done > Yes. Right selection key To set a specific function (from a predefined list) to the right selection key, select Menu > Settings > My shortcuts > Right selection key. This function can be used only if it is supported by your service provider. Navigation key This key allows you to scroll up, down, left, and right.
Settings Edit or Remove — to change or deactivate the voice command of the selected function Remove all — to deactivate voice commands to all functions in the voice commands list. ■ Connectivity You can connect the phone to compatible devices, using Bluetooth wireless technology or USB data cable (CA-53) connection. You can also define the settings for EGPRS or GPRS dial-up connections. Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.
Settings 3. To search for compatible Bluetooth audio devices, select Search for audio enhancements Select the device that you want to connect to the phone. To search for any Bluetooth device in range, select Paired devices. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair. 4. Enter the Bluetooth passcode of the device to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time.
Settings Enhanced GPRS (EGPRS) is similar to GPRS but enables faster connections. For more information on availability of EGPRS or GPRS and data transfer speed, contact your network operator or service provider. The applications that may use EGPRS or GPRS are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up. When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS, if this is available in the network.
Settings You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using the One Touch Access software. See “Nokia PC Suite,” p. 103. If you have set the settings both on your PC and on your phone, the PC settings are used. Data transfer and synchronization Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service).
Settings Synchronize from a compatible PC To synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless technology or a USB data cable (CA-53). You also need the correct version of Nokia PC Suite software for your phone installed on the PC. See “Computer connectivity,” p. 103 for information about Nokia PC Suite. Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC.
Settings Printing & media — to print pictures directly from the phone by using a compatible printer. Data storage — to activate the memory card for data transfer To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing, or Data storage. ■ Call Select Menu > Settings > Call and one of following options: Call divert — to forward your incoming calls (network service). Call divert and call barring cannot be active at the same time.
Settings ■ Phone Select Menu > Settings > Phone and one of the following options: Language settings > Phone language — to set the display language of your phone. If you select Automatic, the phone selects the language according to the information on the SIM card. • To select the USIM card language, select SIM language. • To set a language for the voice playback, select Voice recognition language. See “Make a voice dialing call,” p. 24 and Voice commands in “My shortcuts,” p. 58.
Settings Help text activation — to select whether the phone shows help texts Start-up tone — to select whether the phone plays a start-up tone when the phone is turned on Switch off tone — to select whether the phone plays a switch off tone when the phone is turned off. This menu is only visible if the tone exists in Themes or is part of the powering down functionality of your service provider.
Settings Activate the hearing aid mode Select Hearing aid > T-coil hearing aid mode > On to optimise the sound quality when using a t-coil hearing aid. The icon is shown when the T-coil hearing aid mode is active. If you make an emergency call to 911 while the phone is in the hearing aid mode, the phone will use as much power as it needs (up to the maximum available) to connect the call. More information on accessibility can be found at www.nokiaaccessibility.
Settings Connect to service provider support — to download the configuration settings from your service provider, if this is supported by your service provider Personal configuration settings — to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add new; otherwise, select Options > Add new. Select the service type, and enter each of the required parameters.
Settings Code in use — to select whether the PIN code or UPIN code should be active. Authority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See “Certificates,” p. 100. Security module settings — to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.
Settings Install Select Install software update to start the installation, if you cancelled the installation after the download. The software update may take several minutes. Note: If there are problems with the download or installation, contact your service provider.
Operator menu 9. Operator menu Your service provider may have programmed an operator-specific menu into your phone. If this menu exists in your phone, its functions depend entirely upon the service provider. Contact your service provider for more information.
Gallery 10. Gallery In this menu, you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. The files stored in the Gallery use a memory that may have a capacity of approximately 11 MB in the phone.
Media 11. Media ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GPP format. The camera lens is on the front of the phone. The color display works as a viewfinder. When taking and using images or video clips, obey all laws and respect local customs, as well as privacy and legitimate rights of others. Take a photo 1. Select Menu > Media > Camera > Capture, or press the camera key and select Capture.
Media This Nokia device supports an image capture resolution up to 640 x 480 pixels. The image resolution in these materials may appear different. Record a video clip Select Menu > Media > Camera > Options > Video > Record. To pause recording, select Pause; to resume recording, select Continue. To stop recording, select Stop. The phone saves the recording in Gallery > Video clips. To view the options, select Options.
Media Account — Select a streaming service account contained in the active configuration settings. ■ Music player Your phone includes a music player for listening to music tracks, recordings, or MP3, MP4, WMA (Windows Media Audio), AAC, AAC+, or eAAC+ sound files that you have transferred to the phone with the Nokia Music Manager application. Music files are automatically detected and added to the default track list. Play music tracks 1. Select Menu > Media > Music player.
Media Play options > Random > On — to play the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the entire track list repeatedly. Media equaliser — to open the list of media equalizer sets. See “Equalizer,” p. 80. Add to Favourites — to add the current song to the Favourites track list. Play via Bluetooth — to connect and play music through a bluetooth enabled audio accessory using bluetooth connection.
Media 3. To save the channel in the memory location from 10 to 20, press 1 or 2, and press and hold the number key (0 to 9) you want. 4. Enter the name of the channel, and select OK. Listen 1. Select Menu > Media > Radio. 2. To scroll to the channel you want, select headset key. or , or press the 3. To select a radio channel location, briefly press the corresponding number keys. 4. Select Options and one of the following options: Switch off — to turn off the radio.
Media Station directory— to activate the station directory (network service) to seek available radio stations and save them for later use. Enable visual serv. — to set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual serv. > Automatically. You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.
Media Define a storage folder To use a folder other than Recordings as the default folder in the Gallery, select Menu > Media > Recorder > Options > Select memory and a folder from the list. ■ Equalizer You can control the sound quality when using the music player by amplifying or attenuating frequency bands. 1. Select Menu > Media > Equaliser. 2. To activate a set, scroll to one of the equalizer sets, and select Activate. 3. To view, edit, or rename a selected set, select Options > View, Edit, or Rename.
Push to talk 12. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the volume up key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the people you are calling do not have to answer the phone.
Push to talk ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, use the phone normally by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls. One-to-one calls are calls you make to only one person.
Push to talk To make a group call from Contacts, the recipients must be connected to the PTT service. Select Menu > Contacts > Groups, scroll to the group you want, and press the volume up key. Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the volume up key. You can also select the contact from Contacts.
Push to talk ■ Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send PTT callback.
Push to talk ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: • To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > PTT address. • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the channel you want.
Push to talk To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually. Enter the channel address provided by your service provider. Receive an invitation When you receive a text message invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3.
Push to talk service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.
Organizer 13. Organizer Your Nokia mobile phone has many useful features for organizing your everyday life. The following features are found in Organiser: alarm clock, calendar, to-do list, notes, calculator, countdown timer, and stopwatch. ■ Alarm clock The alarm clock uses the time format set for the clock. The alarm clock works even when the phone is turned off if there is enough power in the battery. To set the alarm, select Menu > Organiser > Alarm clock > Alarm time, and enter the alarm time.
Organizer device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. ■ Calendar The calendar helps you keep track of reminders, calls that you need to make, meetings, and birthdays. Select Menu > Organiser > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type. To view the day notes, select View. To view a week, select Options > Week view.
Organizer ■ To-do list You can save a note for a task that you have to do, select a priority level for the note, and mark it as done when you have completed it. You can sort the notes by priority or by date. To-do notes 1. Select Menu > Organiser > To-do list. 2. If no note is added, select Add note; otherwise, select Options > Add. 3. Write the note, select the priority, set the deadline and the alarm type for the note, and select Save. 4. To view a note, scroll to it, and select View.
Organizer To save the exchange rate, select Options > Exchange rate. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign. ■ Countdown timer 1. Select Menu > Organiser > Timer > Normal timer; enter the alarm time in hours, minutes, and seconds; and select OK. You can write your own note text, which will display when the time expires. 2. To start the timer, select Start. 3. To change the countdown time, select Change time. 4.
Applications 14. Applications ■ Games Your phone software includes some games. Launch Select Menu > Applications > Games, scroll to the game you want, and select Open. For options related to a game, see “Other application options,” p. 92. Downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown.
Applications Details — to give additional information about the application Update version — to check if a new version of the application is available for download from the Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions. Web page — to provide further information or additional data for the application from an Internet page (network service).
Web 15. Web Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. Many wireless mobile Internet access features are network-dependent, and some features may not be available. Contact your service provider for more information. ■ Technology background A technology called wireless application protocol (WAP) is to mobile devices what the world wide web (WWW) is to personal computers. Most WAP sites are made up of text and hyperlinks.
Web Activate the settings Ensure that the Web settings of the service you want to use are activated. 1. Select Menu > Web > Settings > Configuration settings > Configuration. Only the configurations that support the browsing service are shown. 2. Select a service provider or Personal config. for browsing. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web If EGPRS or GPRS is selected as the data bearer, either or is shown in the top left of the display during browsing. If you receive a call or a text message, or make a call during an EGPRS or GPRS connection, or is shown in the top right of the display to indicate that the EGPRS or GPRS connection is suspended (on hold). After a call, the phone tries to reconnect the EGPRS or GPRS connection. Phone keys • To browse through the page, press the scroll key in any direction.
Web Alerts > Alert for unsecure items > Yes — to set the phone to alert when a encrypted page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 99. Character encoding > Content encoding — to select the encoding for the browser page content Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a web page created in a foreign language.
Web 1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks. 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. 3. Select Options to view, edit, delete, or send the bookmark; create a new bookmark; or move the bookmark to a folder. Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites.
Web To set whether you want to receive service message, select Service messages > On or Off. To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On.
Web Select Menu > Settings > Security > Security module settings and one of the following options: Security module details — to show the security module title, manufacturer, and serial number Module PIN request — to set the phone to ask for the module PIN when using services provided by the security module. Enter the code, and select On. To disable the module PIN request, select Off. Change module PIN — to change the module PIN, if allowed by the security module.
Web The security indicator is displayed during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server. Digital signature You can make digital signatures with your phone if your SIM card has a security module.
SIM services 16. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates, and information on using SIM services, contact your service provider. To access these services, it may be necessary to send messages or make a phone call for which you may be charged.
Computer connectivity 17. Computer connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through Bluetooth or USB data cable (CA-53) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ USB data storage You can use the USB data cable to transfer data between the memory card inserted in the phone and a compatible PC. See “USB data cable,” p. 64.
Computer connectivity ■ Data communication applications For information on using a data communication application, refer to the documentation provided with it. Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation. ■ Bluetooth Use Bluetooth technology to connect your compatible laptop to the Internet. Your phone must have activated a service provider that supports Internet access and your PC has to support Bluetooth PAN (Personal Area Network).
Enhancements 18. Enhancements If you want to enhance phone functionality, a range of enhancements is available for you. You can select any of these items to help accommodate your specific communication needs.
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information others are to interference. Please consult your hearing health professional to determine the M rating of your hearing aid and whether your hearing aid will work with this device. GSM networks in the United States utilize 850 and 1900 MHz bands. Your phone operates on both bands, and is enhanced with a "hearing aid mode" to activate if needed. There is no benefit to using the hearing aid mode if you do not wear hearing aids.
Additional safety information http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: LJPRM-198.
Index Index A D access codes 11 active standby 22, 61 alarm clock 90 antenna 19 dialing 26 downloads content and applications 13 settings 100 B E battery charge 15 strength indicator 21 bluetooth 62 bookmarks 99 browser 97 business cards 53 e-mail application 43 emergency calls 114 enhancements 107 C I instant messaging 38 DRAFT calculator 92 calendar 91 call answer 27 end 26 log 55 make 26 options 28 reject 27 voice mail 46 waiting 27 camera lens 20 use 76 contacts add 51 copy 52 delete 52 dele
Index notes 92 O operator logo 59 operator menu 74 P phone software updates 72 plug and play service 17 profiles 57 PTT.
