V2G_0.3_070618_clean_FCC.
V2G_0.3_070618_clean_FCC.fm Page 2 Tuesday, August 7, 2007 4:59 PM © 2007 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, Navi, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune and Visual Radio are sound marks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.
V2G_0.3_070618_clean_FCC.fm Page 3 Tuesday, August 7, 2007 4:59 PM persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications.
V2G_0.3_070618_clean_FCC.fm Page 4 Tuesday, August 7, 2007 4:59 PM Contents For your safety ................................. 6 Support ............................................. 9 Help application................................................ 9 Issues with your device................................... 9 Traditional text input.................................... 32 Predictive text input...................................... 32 Copy and delete text..................................... 33 6.
V2G_0.3_070618_clean_FCC.fm Page 5 Tuesday, August 7, 2007 4:59 PM 12.Organizer................................... 60 15.Connectivity.............................. 82 Clock.................................................................. Calendar ........................................................... Notes ................................................................. Converter.......................................................... PC Suite....................................................
V2G_0.3_070618_clean_FCC.fm Page 6 Tuesday, August 7, 2007 4:59 PM For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving.
V2G_0.3_070618_clean_FCC.fm Page 7 Tuesday, August 7, 2007 4:59 PM CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location.
V2G_0.3_070618_clean_FCC.fm Page 8 Tuesday, August 7, 2007 4:59 PM Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
V2G_0.3_070618_clean_FCC.fm Page 9 Tuesday, August 7, 2007 4:59 PM Support ■ Help application Your device has context-sensitive help. You can access the help from an application or from the main menu. To access help when an application is open, select Options > Help. To switch between help and the application that is open in the background, select and hold Menu.
V2G_0.3_070618_clean_FCC.fm Page 10 Tuesday, August 7, 2007 4:59 PM • List of local Nokia contact centres, if you need to contact customer service. • Your nearest Nokia service centres for maintenance services. Before sending your device for repair, always back up or make a record of data in your device. Update your device software Nokia may produce software updates that may offer new features, enhanced functions, or improved performance.
V2G_0.3_070618_clean_FCC.fm Page 11 Tuesday, August 7, 2007 4:59 PM To remove the battery, lift it as shown (3). FC C DR AF T To release the SIM card holder, gently pull the locking clip of the card holder, and open it (4). Insert the SIM card to the SIM card holder (5). Make sure that the SIM card is properly inserted and that the gold-colored contact area on the card is facing downwards. Close the SIM card holder, and press it until it snaps into position (6). Replace the battery (7).
V2G_0.3_070618_clean_FCC.fm Page 12 Tuesday, August 7, 2007 4:59 PM ■ microSD card Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Keep microSD cards out of the reach of small children. You can extend the available memory with a microSD memory card.
V2G_0.3_070618_clean_FCC.fm Page 13 Tuesday, August 7, 2007 4:59 PM ■ Charge the battery Connect the charger to a wall socket. Connect the charger to the device. DR AF The charging time depends on the charger and the battery used. Charging a BP-5M battery with the AC-4 charger takes approximately 80 minutes. T If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
V2G_0.3_070618_clean_FCC.fm Page 14 Tuesday, August 7, 2007 4:59 PM Cellular antenna (1) Bluetooth antenna (2) GPS antenna (3) DR AF T Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call.
V2G_0.3_070618_clean_FCC.fm Page 15 Tuesday, August 7, 2007 4:59 PM 2.
V2G_0.3_070618_clean_FCC.fm Page 16 Tuesday, August 7, 2007 4:59 PM ■ Standby mode When you have switched on the device, and it is registered to a network, the device is in the standby mode and ready for use. To change the profile, press the end key, and select a profile. To open the list of last dialed numbers, press the call key. To start a connection to the web, press and hold 0.
V2G_0.3_070618_clean_FCC.fm Page 17 Tuesday, August 7, 2007 4:59 PM An alarm is active. The second phone line is being used. See Line in use in "Call," p. 74. / All calls to the phone are diverted to your call mailbox or to another number. If you have two phone lines, the divert indicator is for the first line and for the second. A loopset is connected to the device. T A headset is connected to the device. / A data call is active. DR AF The connection to a Bluetooth headset has been lost.
V2G_0.3_070618_clean_FCC.fm Page 18 Tuesday, August 7, 2007 4:59 PM To change the menu view, select Menu > Options > Change Menu view and a view type. If you change the order of the functions in the menu, the order may differ from the default order described in this user guide. To close an application or a folder, select Back and Exit as many times as needed to return to the main menu, or select Options > Exit. To display and switch between open applications, select and hold Menu.
V2G_0.3_070618_clean_FCC.fm Page 19 Tuesday, August 7, 2007 4:59 PM When the keypad is locked and the main display light is off, to activate the main display light, open the slide. Opening the slide also unlocks the keypad. To unlock the keypad when the slide is closed, select Unlock and OK within 1.5 seconds. Also opening the camera lens cover unlocks the keypad. When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.
V2G_0.3_070618_clean_FCC.fm Page 20 Tuesday, August 7, 2007 4:59 PM If the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using Call barring. See "Call barring," p. 76. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider.
V2G_0.3_070618_clean_FCC.fm Page 21 Tuesday, August 7, 2007 4:59 PM ■ Connect a compatible headset Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV connector. DR AF ■ Connect a USB data cable T When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV connector, pay special attention to volume levels.
V2G_0.3_070618_clean_FCC.fm Page 22 Tuesday, August 7, 2007 4:59 PM To make a call from Contacts, select Menu > Contacts. Scroll to the desired name; or enter the first letters of the name, and scroll to the desired name. To call the number, press the call key. To call your call mailbox (network service), press and hold 1 in the standby mode. You must define the call mailbox number before you can call your call mailbox. See "Call mailbox," p. 79.
V2G_0.3_070618_clean_FCC.fm Page 23 Tuesday, August 7, 2007 4:59 PM Using voice commands to carry out a device function is similar to voice dialing. See "Voice commands," p. 69. Make a conference call (network service) 1. Make a call to the first participant. 2. To make a call to another participant, select Options > New call. The first call is automatically put on hold. 3. To join the first participant in the conference call when the new call is answered, select Options > Conference.
V2G_0.3_070618_clean_FCC.fm Page 24 Tuesday, August 7, 2007 4:59 PM To send a text message to inform the caller as to why you cannot answer the call, select Options > Send text message. You can edit the text before you send it. See Reject call with SMS and Message text in "Call," p. 74. Note that when a headset is connected, the slide call handling settings are not in use. Call waiting (network service) During a call, to answer the waiting call, press the call key. The first call is put on hold.
V2G_0.3_070618_clean_FCC.fm Page 25 Tuesday, August 7, 2007 4:59 PM Note: Some timers, including the life timer, may be reset during service or software upgrades. Recent calls The device registers the phone numbers of missed, received, and dialed calls, and the approximate duration of your calls. The device registers missed and received calls only if the network supports these functions, and the device is switched on and within the network service area.
V2G_0.3_070618_clean_FCC.fm Page 26 Tuesday, August 7, 2007 4:59 PM As availability of GPS related services depends on wireless environment and systems, the services may not fuction in all environments at all times. In case of sudden loss of GPS reception, press the Navigator key to restart the application. Your device also supports Assisted GPS (A-GPS) service which helps determining the location faster.
V2G_0.3_070618_clean_FCC.fm Page 27 Tuesday, August 7, 2007 4:59 PM • If you are outdoors, move to a more open space. • Check that your hand does not cover the GPS antenna of your device. • If the weather conditions are bad, in such a case the signal strength may also be affected. • Establishing a GPS connection may take several minutes. ■ Navigator application T To start the Navigator application, press the Navigator key, or select Menu > Navigator.
V2G_0.3_070618_clean_FCC.fm Page 28 Tuesday, August 7, 2007 4:59 PM 5 — Show or hide the GPS information view. 6 — Toggle between 2-D and 3-D perspective. 7 — Open the Free text search view. 8 — Zoom to the entire map. 9 — Toggle between sound on and off. 0 — Repeat the previous voice instruction (only when navigating). * or # — Zoom in or out on the map. The minimum is street level and the maximum is the globe. DR AF T To move on the map, scroll left, right, up, or down.
V2G_0.3_070618_clean_FCC.fm Page 29 Tuesday, August 7, 2007 4:59 PM If an intermediary waypointhas been defined, a confirmation query is displayed. To continue the navigation with the new waypoint, select Yes, or to continue the navigation with the old waypoint, select No. Alarms To receive a visual or acoustic alarm when approaching a certain location, select Options > Settings > Alarm and the category to which the location belongs.
V2G_0.3_070618_clean_FCC.fm Page 30 Tuesday, August 7, 2007 4:59 PM To send your cursor position on the map to a compatible device, for example as an SMS or MMS, select it and Send cursor position > Via text message or Via multimedia. To save data, such as current GPS or cursor position to your device, select Options > Save and the data to be saved. You can add a location, for example, a cursor position, in Contacts. Select Save cursor position > New contact. ■ Plan trips DR AF T 1.
V2G_0.3_070618_clean_FCC.fm Page 31 Tuesday, August 7, 2007 4:59 PM For detailed information about the settings, see the Navigator help. To access the help, select Settings > Options > Help. ■ Extras To complement your device, download maps from the internet to your PC and use the Nokia Map Manager application (an add-on application to PC Suite) to transfer the maps from your PC or a DVD to a memory card in your device, see "Transfer maps from PC", p. 31.
V2G_0.3_070618_clean_FCC.fm Page 32 Tuesday, August 7, 2007 4:59 PM 5. Write text When you write text, appears on the top right of the display, indicating predictive text input, or appears, indicating traditional text input. To set the predictive text input on or off when writing text, press # repeatedly until the desired mode is active. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. DR AF T indicates the number mode.
V2G_0.3_070618_clean_FCC.fm Page 33 Tuesday, August 7, 2007 4:59 PM To erase a character, press the clear key. To erase more characters, press and hold the clear key. 2. When you have finished the word and it is correct, to confirm it, scroll forward or insert a space. If the word is not correct, to view the matching words the dictionary has found one by one, press * repeatedly. DR AF T If the ? character is shown after the word, the word you intended to write is not in the dictionary.
V2G_0.3_070618_clean_FCC.fm Page 34 Tuesday, August 7, 2007 4:59 PM My folders — for organizing your messages into folders Mailbox — for connecting to your remote mailbox to retrieve your new e-mail messages or viewing your previously retrieved e-mail messages offline. After you define settings for a new mailbox, the name given to that mailbox is displayed instead of Mailbox.
V2G_0.3_070618_clean_FCC.fm Page 35 Tuesday, August 7, 2007 4:59 PM 4. Scroll down to move to the message field. 5. Write the message. When writing text messages, the message length indicator shows how many characters you can enter in the message. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two separate text messages. T To use a template for the text message, select Options > Insert > Template.
V2G_0.3_070618_clean_FCC.fm Page 36 Tuesday, August 7, 2007 4:59 PM E-mail settings Before you can send, receive, retrieve, reply to, and forward e-mail to a separate e-mail account, you must configure an internet access point (IAP) and define your e-mail settings correctly, see "Connection," p. 76 and "E-mail settings," p. 41. Follow the instructions given by your e-mail service provider and internet service provider. ■ Inbox—receive messages Select Menu > Messaging > Inbox. .
V2G_0.3_070618_clean_FCC.fm Page 37 Tuesday, August 7, 2007 4:59 PM Service messages Service messages (network service) are notifications (for example, news headlines) that may contain a text message or the address of a browser service. For availability and subscription, contact your service provider. ■ My folders You can organize your messages into folders, create new folders, and rename and delete folders. ■ Mailbox DR AF T Select Menu > Messaging > My folders.
V2G_0.3_070618_clean_FCC.fm Page 38 Tuesday, August 7, 2007 4:59 PM 4. To open an e-mail message, select it. If the e-mail message has not been retrieved and you are offline and select Open, you are asked if you want to retrieve this message from the mailbox. To view e-mail attachments, indicated with , select Options > Attachments. You can retrieve, open, or save attachments in supported formats.
V2G_0.3_070618_clean_FCC.fm Page 39 Tuesday, August 7, 2007 4:59 PM ■ Cell broadcast You may be able to receive messages on various topics, such as weather or traffic conditions from your service provider (network service). To turn on the service, see Cell broadcast in "Cell broadcast settings," p. 42. Select Menu > Messaging > Options > Cell broadcast. A packet data connection may prevent cell broadcast reception.
V2G_0.3_070618_clean_FCC.fm Page 40 Tuesday, August 7, 2007 4:59 PM Reply via same centre (network service) — If you select Yes, and the recipient replies to your message, the return message is sent using the same message service center number. All networks do not provide this option. Multimedia messaging settings Select Menu > Messaging > Options > Settings > Multimedia message and from the following options: Image size — Define the size of the image in a multimedia message.
V2G_0.3_070618_clean_FCC.fm Page 41 Tuesday, August 7, 2007 4:59 PM E-mail settings Mailbox settings Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a mailbox. If no mailbox settings have been defined before, you are asked if you want to define the settings. Connection settings > Incoming e-mail and Outgoing e-mail — To define the correct settings, contact your e-mail service provider.
V2G_0.3_070618_clean_FCC.fm Page 42 Tuesday, August 7, 2007 4:59 PM Automatic retrieval Select Automatic retrieval and from the following settings: E-mail notifications — To automatically retrieve the headers to your device when you receive a notification of new e-mail in your remote mailbox, select Autoupdate or Only in home netw..
V2G_0.3_070618_clean_FCC.fm Page 43 Tuesday, August 7, 2007 4:59 PM Number of saved msgs. — Define how many sent messages are saved to the sent items folder at a time. When the limit is reached, the oldest message is deleted. Memory in use — Select whether to save messages to the device memory or memory card. ■ Message reader With Message reader, you can listen to received text, multimedia, and e-mail messages.
V2G_0.3_070618_clean_FCC.fm Page 44 Tuesday, August 7, 2007 4:59 PM ■ Manage contact groups Create a contact group so that you can send text or e-mail messages to several recipients at the same time. 1. Scroll to the right, and select Options > New group. 2. Enter a name for the group. 3. Select the group and Options > Add members. 4. Mark the contacts you want to add to the group, and select OK. ■ Add a ringing tone 1. Select Menu > Contacts.
V2G_0.3_070618_clean_FCC.fm Page 45 Tuesday, August 7, 2007 4:59 PM 8. Gallery Use Gallery to store and organize your images, video clips, music tracks, sound clips, track lists, streaming links, .ram files, and presentations. Select Menu > Gallery and a folder. To set an image as your wallpaper, select Images and the desired image. Select Options > Use image > Set as wallpaper. To assign the image to a contact, select Assign to contact.
V2G_0.3_070618_clean_FCC.fm Page 46 Tuesday, August 7, 2007 4:59 PM Shortcuts in the image editor are as follows: • To view an image in the full screen, press *. To return to the normal view, press * again. • To rotate an image clockwise or counterclockwise, press 3 or 1. • To zoom in or out, press 5 or 0. • To move on a zoomed image, scroll up, down, left, or right.
V2G_0.3_070618_clean_FCC.fm Page 47 Tuesday, August 7, 2007 4:59 PM Edit transition — There are three types of transitions: at the start of a video, at the end of a video, and transitions between video clips. You can select start transition when the first transition of the video is active. Insert — Select Video clip, Image, Text, Sound clip, or New sound clip.
V2G_0.3_070618_clean_FCC.fm Page 48 Tuesday, August 7, 2007 4:59 PM 9. Media ■ Camera Your device has a camera on the back cover. DR AF T To use the camera, open the camera slide cover. To activate the camera, press the camera key. To zoom in or out, use the volume keys or scroll up or down. To capture an image, press the camera key. The image is saved to Images in Gallery, and the image is displayed. To return to the viewfinder, select Back. To delete the photo, press the clear key.
V2G_0.3_070618_clean_FCC.fm Page 49 Tuesday, August 7, 2007 4:59 PM To adjust the white balance or color tone, select Options > Adjust > White balance or Colour tone. To record a video, select Options > Video mode, and press the scroll key to start recording. Camera settings Your device supports an image capture resolution of 1600 x 1200 pixels. To change camera settings, select Menu > Media > Camera > Options > Settings.
V2G_0.3_070618_clean_FCC.fm Page 50 Tuesday, August 7, 2007 4:59 PM To play a specific album, select Albums, scroll to the album, and select Options > Play. To listen to specific tracks on the album, select Albums and an album, mark the tracks, and select Options > Play. Track lists To compile and save your own track list, select Track lists > Options > New track list. Select the memory in which to save the track list, and enter a name for the track list. Mark the desired tracks, and press the scroll key.
V2G_0.3_070618_clean_FCC.fm Page 51 Tuesday, August 7, 2007 4:59 PM Create a new preset 1. To create a new preset, select Options > New preset, and enter the preset name. 2. To move between frequency bands, scroll left or right. To enhance or diminish sound in the frequency band, scroll up or down. 3. Select Back. ■ RealPlayer DR AF T With RealPlayer, you can play media files such as video clips saved in the device memory or memory card, or stream media files over the air by opening a streaming link.
V2G_0.3_070618_clean_FCC.fm Page 52 Tuesday, August 7, 2007 4:59 PM Press the volume keys to increase or decrease the sound volume. ■ Visual Radio You can use the Visual Radio application as a FM radio with automatic tuning and preset stations or with parallel visual information related to the radio program if you tune in to stations that offer Visual Radio service and your network operator supports the service. The Visual Radio service uses packet data (network service).
V2G_0.3_070618_clean_FCC.fm Page 53 Tuesday, August 7, 2007 4:59 PM To listen to the radio in the background and go to the standby mode, select Options > Play in background. Station list When the radio is on, select Options > Stations. The station list is used for managing the saved radio stations. Station setup DR AF View visual content T Scroll to a station in the station list, select it and Edit to change the station parameters.
V2G_0.3_070618_clean_FCC.fm Page 54 Tuesday, August 7, 2007 4:59 PM Access the station directory from the visual content view To retrieve the visual service ID and to start visual content for the currently tuned radio station, select and Retrieve. After the connection to the station directory is established, select the nearest location to your current position from a list of folders. The device compares the frequencies of the listed radio stations with the currently tuned in frequency.
V2G_0.3_070618_clean_FCC.fm Page 55 Tuesday, August 7, 2007 4:59 PM Important: Use only services that you trust and that offer adequate security and protection against harmful software. ■ Set up the phone for the browser service Your device may configure the WAP or internet access point automatically based on your SIM card. You can use Settings wizard to configure WAP or internet access point settings. See "Settings wizard," p. 79.
V2G_0.3_070618_clean_FCC.fm Page 56 Tuesday, August 7, 2007 4:59 PM 3. Select Options > Save. Send bookmarks Scroll to a bookmark or mark several bookmarks, select Options > Tools > Send and an option. ■ Connection security If the security indicator is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.
V2G_0.3_070618_clean_FCC.fm Page 57 Tuesday, August 7, 2007 4:59 PM To open the browser toolbar, scroll to an empty part of the page, and press the scroll key. Keypad shortcuts while browsing 1 — Open your bookmarks. 2 — Search for keywords in the current page. 3 — Return to the previous page. 5 — List all open windows. 0 — Go to the start page. DR AF 9 — Enter a new web address. T 8 — Show the page overview of the current page. Press 8 again to zoom in and view the desired section of the page.
V2G_0.3_070618_clean_FCC.fm Page 58 Tuesday, August 7, 2007 4:59 PM The browser automatically detects if a web page contains web feeds. To subscribe to a web feed, select Options > Subscribe and a feed, or click on the link. To view the web feeds you have subscribed to, in the bookmarks view, select Web feeds. To update a web feed, select it, and Options > Refresh. To define how the web feeds are updated, select Options > Settings > Web feeds. Saved pages You can save pages and view them later offline.
V2G_0.3_070618_clean_FCC.fm Page 59 Tuesday, August 7, 2007 4:59 PM History list — Select whether a list of the pages you have visited during the current browsing session are displayed when you select Back. Security warnings — Hide or show security notifications. Java/Ecma Script — Enable or disable the use of scripts. Page Load content — Select what type of content is loaded automatically while browsing. If you select Text only, to load images during browsing, select Options > Tools > Load images.
V2G_0.3_070618_clean_FCC.fm Page 60 Tuesday, August 7, 2007 4:59 PM 11. Download! Download! (network service) is a mobile content shop available on your device. You may be able to download some content free of charge. With Download! you can discover, preview, buy, download, and upgrade content, services, and applications. The items are categorized under catalogs and folders provided by different service providers. The available content depends on your service provider. Select Menu > Download!. 12.
V2G_0.3_070618_clean_FCC.fm Page 61 Tuesday, August 7, 2007 4:59 PM If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. World clock To open the world clock view, scroll right to World.
V2G_0.3_070618_clean_FCC.fm Page 62 Tuesday, August 7, 2007 4:59 PM Calendar views Press # in the month, week, or day views to automatically highlight today’s date. To create a meeting entry, press any number key (0–9) in any calendar view. To go to a certain date, select Options > Go to date. Write the date, and select OK. To-do Select Options > To-do view. In the To-do view, you can keep a list of tasks that you need to do. DR AF T Create a to-do note 1.
V2G_0.3_070618_clean_FCC.fm Page 63 Tuesday, August 7, 2007 4:59 PM Press # to add a decimal and press * for the +, - (for temperature), and E (exponent) symbols. The conversion order changes if you write a value in the second amount field. The result is shown in the first amount field. Set a base currency and exchange rates Before you can convert currency, you need to choose a base currency (usually your domestic currency) and add exchange rates. T The rate of the base currency is always 1.
V2G_0.3_070618_clean_FCC.fm Page 64 Tuesday, August 7, 2007 4:59 PM Position To save your current location as a landmark, select Options > Save position. Trip distance Select Trip distance > Options > Start to activate trip distance calculation and Stop to deactivate it. The calculated values remain on the display. Select Reset to set the trip distance, time, average and maximum speeds to zero and to start a new calculation. Select Restart to set also the odometer and total time to zero.
V2G_0.3_070618_clean_FCC.fm Page 65 Tuesday, August 7, 2007 4:59 PM Open a .pdf file To open a recently viewed document, select it. To open a document that is not listed in the main view, select Options > Browse for file the memory and folder wherein the file resides and the file. View a document To move around within a page, scroll. To move to the next page, scroll down at the bottom of the page. To zoom in or out, select Options > Zoom > In or Out.
V2G_0.3_070618_clean_FCC.fm Page 66 Tuesday, August 7, 2007 4:59 PM Quickword supports the viewing of documents saved in .doc format in Microsoft Word 97, 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. View Word documents To move in the document, scroll. To search the document for text, select Options > Search options > Find. Quicksheet With Quicksheet, you can read Microsoft Excel files on the display of your device.
V2G_0.3_070618_clean_FCC.fm Page 67 Tuesday, August 7, 2007 4:59 PM View presentations To move between the slide, outline, and the notes view, scroll left or right. To move to the next or previous slide in the presentation, scroll down or up. To view the presentation in full screen, select Options > Full screen. To expand items in the presentation outline in the outline view, select Options > Outline > Expand.
V2G_0.3_070618_clean_FCC.fm Page 68 Tuesday, August 7, 2007 4:59 PM Ringing tone — To set the ringing tone (also a video ringing tone) for voice calls, choose a ringing tone from the list. Press any key to stop the sound. You can also change ringing tones in contacts. See "Add a ringing tone," p. 44. Say caller's name — Select On to have the device say the caller’s name when the phone is ringing.
V2G_0.3_070618_clean_FCC.fm Page 69 Tuesday, August 7, 2007 4:59 PM To preview a theme, scroll to the theme, and select Options > Preview. To activate the previewed theme, select Set. In Themes, you can also set the menu view type, set a custom wallpaper, and personalize the power saver and the cover display. ■ 3-D tones With 3-D tones you can apply three-dimensional sound effects to ringing tones. Not all ringing tones support 3-D effects. To edit 3-D tone settings, select Menu > Settings > 3-D tones.
V2G_0.3_070618_clean_FCC.fm Page 70 Tuesday, August 7, 2007 4:59 PM Personalisation Select Display, Standby mode, Tones, Language, Themes, or Voice comms..
V2G_0.3_070618_clean_FCC.fm Page 71 Tuesday, August 7, 2007 4:59 PM Themes Apply themes. See "Themes," p. 68. Voice commands Edit voice command and voice dialing settings. See "Voice commands," p. 69. Date and time Time and Date — to set the time and date Time zone — to set the time zone of your location. If you set Network operator time > Auto-update, the local time is shown.
V2G_0.3_070618_clean_FCC.fm Page 72 Tuesday, August 7, 2007 4:59 PM Default profile — to select the profile you want to activate each time you connect the enhancement to your device Automatic answer — to set the device to answer an incoming call automatically after 5 seconds when this enhancement is connected to your device. If the Ringing type is set to Beep once or Silent, automatic answer cannot be used, and you must answer the call manually.
V2G_0.3_070618_clean_FCC.fm Page 73 Tuesday, August 7, 2007 4:59 PM Confirm SIM services (network service) — to set the device to display confirmation messages when you use a SIM card service Certificate management A list of authority certificates that have been stored in your device is displayed in Certificate management. To see a list of personal certificates if available, scroll right.
V2G_0.3_070618_clean_FCC.fm Page 74 Tuesday, August 7, 2007 4:59 PM Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. Security module View or edit security modules.
V2G_0.3_070618_clean_FCC.fm Page 75 Tuesday, August 7, 2007 4:59 PM Call waiting (network service) — to set the network to notify you of a new incoming call while you have a call in progress. To request the network to activate call waiting, select Activate. To request the network to deactivate call waiting, select Cancel. To check whether the function is active, select Check status. Reject call with SMS — to enable rejecting phone calls with a text message. See "Answer or reject a call," p. 23.
V2G_0.3_070618_clean_FCC.fm Page 76 Tuesday, August 7, 2007 4:59 PM Call barring and call diverting cannot be active at the same time. Call barring Call barring (network service) allows you to restrict the calls that you make and receive with your device. To change the settings, you need the barring password from your service provider. Scroll to the desired barring option, and to request the network to set call restriction on, select Options > Activate.
V2G_0.3_070618_clean_FCC.fm Page 77 Tuesday, August 7, 2007 4:59 PM • MMS access point to send and receive multimedia messages • WAP access point to view web pages • Internet access point (IAP) (for example, to send and receive e-mail) Check which kind of access point you need with your service provider for the service you wish to access. For availability and subscription to data connection services, contact your service provider.
V2G_0.3_070618_clean_FCC.fm Page 78 Tuesday, August 7, 2007 4:59 PM If there are no packet data services available and you have chosen When available, the device periodically tries to establish a packet data connection. Access point — The access point name is needed when you want to use your device as a modem with your computer. Data call The data call settings affect all access points that use a GSM data call.
V2G_0.3_070618_clean_FCC.fm Page 79 Tuesday, August 7, 2007 4:59 PM ■ Settings wizard The settings wizard configures your device for operator (MMS, GPRS, and internet) and e-mail settings based on your service provider. Configuring other settings may also be possible. To use these services, you may have to contact your service provider to activate a data connection or other services. Select Menu > Settings > Sett. wizard.
V2G_0.3_070618_clean_FCC.fm Page 80 Tuesday, August 7, 2007 4:59 PM To choose the default server, select Default server and the server. To be automatically connected to the IM server during the days and times you define, select IM login type > Automatic. To only be automatically connected while in your home network, select Auto in home netw.. To be automatically connected when you start the IM application, select On app. start-up. To connect manually, select Manual.
V2G_0.3_070618_clean_FCC.fm Page 81 Tuesday, August 7, 2007 4:59 PM To reply to a private message sent to you, scroll to the message, and select Options > Reply. To invite IM contacts who are online to join the IM group (if allowed in the group), select Options > Send invitation, select the contacts you want to invite, write the invitation message, and select Send. Start and view individual conversations Select Menu > Settings > IM > Conversations.
V2G_0.3_070618_clean_FCC.fm Page 82 Tuesday, August 7, 2007 4:59 PM Create a new IM group Select Menu > Settings > IM > IM groups > Options > Create new group. Enter the settings for the group. Restrict access to an IM group To create a closed IM group, create a group members list. Only the users on the list are allowed to join the group. Select the IM groups view, scroll to the group, and select Options > Group > Settings > Group members > Selected only. ■ PC Suite DR AF T 15.
V2G_0.3_070618_clean_FCC.fm Page 83 Tuesday, August 7, 2007 4:59 PM Bluetooth connection settings Select Menu > Settings > Connectivity > Bluetooth. Bluetooth — to switch Bluetooth on or off My phone's visibility > Shown to all — to allow your device to be found by other Bluetooth devices at all times. To allow your device to be found for a defined time period, select Define period. For security reasons it is advisable to use the Hidden setting whenever possible.
V2G_0.3_070618_clean_FCC.fm Page 84 Tuesday, August 7, 2007 4:59 PM Paired devices view Paired devices are indicated by in the search result list. In the Bluetooth main view, scroll right to open a list of paired devices. Do not accept Bluetooth connections from sources you do not trust. To pair with a device, select Options > New paired device. Select the device with which to pair. Exchange passcodes. To cancel pairing, scroll to the device whose pairing you want to cancel and press the clear key.
V2G_0.3_070618_clean_FCC.fm Page 85 Tuesday, August 7, 2007 4:59 PM ■ Remote synchronization Select Menu > Settings > Connectivity > Sync. Sync enables you to synchronize your calendar, contacts, or notes with various calendar and address book applications on a compatible computer or on the internet. The synchronization application uses SyncML technology for synchronization. Create a new synchronization profile T 1.
V2G_0.3_070618_clean_FCC.fm Page 86 Tuesday, August 7, 2007 4:59 PM Synchronize data In the main view, scroll to a profile, and select Options > Synchronise. The status of the synchronization is shown. After synchronization is complete, select Options > View log to open a log file showing the synchronization status (Complete or Incomplete) and how many calendar or contact entries have been added, updated, deleted, or discarded (not synchronized) in the device or on the server.
V2G_0.3_070618_clean_FCC.fm Page 87 Tuesday, August 7, 2007 4:59 PM Besides the packet data counters, the device registers only one-to-one calls in the recent calls lists in Log. The participants should confirm the reception of any communications where appropriate as there is no other confirmation of whether the recipients have heard the call. To check availability and costs, and to subscribe to the service, contact your service provider.
V2G_0.3_070618_clean_FCC.fm Page 88 Tuesday, August 7, 2007 4:59 PM Show my login status — Select whether your status is shown to others. Connection settings Contact your PTT service provider for the connection settings. Log in to PTT Select Menu > Settings > Connectivity > PTT, or press the my own key. PTT automatically logs in to the service when started. indicates a PTT connection.
V2G_0.3_070618_clean_FCC.fm Page 89 Tuesday, August 7, 2007 4:59 PM Make a PTT group call To call a group, select Options > Contacts, select Options > Talk to many, mark the contacts you want to call, and press my own key. Callback requests Send a callback request If you make a one-to-one call and do not get a response, you can send a request for the person to call you back. DR AF T To send a callback request from Contacts, scroll to a contact, and select Options > Send callback request.
V2G_0.3_070618_clean_FCC.fm Page 90 Tuesday, August 7, 2007 4:59 PM Join a preconfigured channel A preconfigured channel is a talk group that is set up by your service provider. Only preconfigured users are allowed to join and use the channel. 1. Select Options > PTT channels. 2. Select Options > New channel > Add existing. 3. Enter the Channel name, Channel address, and Nickname. You can also add a Thumbnail. 4. Select Done.
V2G_0.3_070618_clean_FCC.fm Page 91 Tuesday, August 7, 2007 4:59 PM Depending on the type of the other device, an application may be sent and installed on the other device to enable the data transfer. 3. Select what content you want to be transferred to your device. 4. Content is transferred to your device. The transfer time depends on the amount of data. You can stop the transfer and continue later. ■ Application manager T 16.
V2G_0.3_070618_clean_FCC.fm Page 92 Tuesday, August 7, 2007 4:59 PM The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. To install an application or software package: 1. Scroll to an installation file. Applications on the memory card are indicated with . 2. Select Options > Install. Alternatively, search the device memory or the memory card, select the application, and press the scroll key to start the installation.
V2G_0.3_070618_clean_FCC.fm Page 93 Tuesday, August 7, 2007 4:59 PM ■ File manager Select Menu > Settings > Data mgr. > File mgr.. In the file manager, you can browse, open, and manage files and folders in the device memory or on the memory card. Open the file manager to see a list of the folders in the device memory. Scroll right to see the folders on the memory card. View memory consumption DR AF T Scroll either right or left to view the device memory or the memory card contents.
V2G_0.3_070618_clean_FCC.fm Page 94 Tuesday, August 7, 2007 4:59 PM Update software Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update. To check the current version of the software, select Menu > Settings > Data mgr. > Device mgr. > Updates.
V2G_0.3_070618_clean_FCC.fm Page 95 Tuesday, August 7, 2007 4:59 PM To restore information from the memory card to the phone memory, select Options > Restore from card. You can only back up the phone memory and restore it to the same phone. Lock and unlock the memory card To set a password to help prevent unauthorized use, select Options > Set password. You are asked to enter and confirm your password. The password can be up to eight characters long.
V2G_0.3_070618_clean_FCC.fm Page 96 Tuesday, August 7, 2007 4:59 PM Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content. If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia PC Suite.
V2G_0.3_070618_clean_FCC.fm Page 97 Tuesday, August 7, 2007 4:59 PM work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Do not dismantle or shred cells or batteries.
V2G_0.3_070618_clean_FCC.fm Page 98 Tuesday, August 7, 2007 4:59 PM 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
V2G_0.3_070618_clean_FCC.fm Page 99 Tuesday, August 7, 2007 4:59 PM Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
V2G_0.3_070618_clean_FCC.fm Page 100 Tuesday, August 7, 2007 4:59 PM Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment DR AF T This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
V2G_0.3_070618_clean_FCC.fm Page 101 Tuesday, August 7, 2007 4:59 PM • Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
V2G_0.3_070618_clean_FCC.fm Page 102 Tuesday, August 7, 2007 4:59 PM ■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies. To make an emergency call: 1. If the device is not on, switch it on.
V2G_0.3_070618_clean_FCC.fm Page 103 Tuesday, August 7, 2007 4:59 PM Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.
