DR A FT Nokia 6290 User Guide
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-176 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/ 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.
Contents Contents For your safety.......................... 6 General information................. 9 Access codes............................................ 9 Nokia support and contact information........................................... 10 1. Get started ......................... 11 11 12 13 13 13 14 2. Your phone......................... 15 Write and send messages ................. Inbox—receive messages................... My folders ............................................. Mailbox............
Contents View bookmarks................................... Connection security............................ Browse web pages............................... Download............................................... End a connection................................. Empty the cache .................................. Browser settings .................................. 60 61 62 64 64 64 64 10. Download!........................ 67 11. Organizer.......................... 68 Clock...................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your device is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your device. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS ■ About your device FT Ensure the phone function of the device is switched on and in service.
For your safety ■ Network services To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services.
General information General information ■ Access codes Lock code The lock code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. Change the code, and keep the new code secret and in a safe place separate from your phone. To change the code and to set the phone to request the code, see “Security,” p. 83. FT If you enter an incorrect lock code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
General information PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes. Barring password The barring password (4 digits) is required when using Call barring. See “Call barring,” p. 87. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider.
Get started 1. Get started ■ Insert a (U)SIM card and battery Always switch the device off and disconnect the charger before removing the battery. This device uses BL-5F batteries. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor. FT 1. With the back of the phone facing you, slide the back cover to remove it. DR A 2. To remove the battery, lift it as shown. 3.
Get started 4. Insert the (U)SIM card to the SIM card holder. Make sure that the (U)SIM card is properly inserted and that the gold-colored contact area on the card is facing downwards. Close the SIM card holder, and press it until it snaps into position. FT 5. Replace the battery. DR A 6. Slide the back cover into place. ■ Charge the battery Connect the charger to the wall socket. Open the charger connector lid (1), and connect the charger plug to the charger connector in the phone (2).
Get started The charging time depends on the charger and the battery used. Charging a BL-5F battery with the AC-4 charger takes approximately 45 minutes. ■ Switch the phone on or off Press and hold the end key. If the phone asks for a PIN code, enter the PIN code, and select OK. If the phone asks for the lock code, enter the lock code, and select OK. The factory setting for the lock code is 12345. ■ Set time and date FT The phone fold opens to approximately 155 degrees.
Get started Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise needed, and may reduce the battery life.
Your phone 2. Your phone ■ Keys and parts Earpiece (1) Secondary camera lens (2) Main display (3) Light sensor (4) Left and right selection keys (5) Menu key (7) Clear key (8) Call key (9) DR A End key (10) FT Navi™ scroll key (6), hereafter referred to as scroll key Multimedia key (11) Number keys (12) Microphone (13) Camera flash (14) Main camera lens (15) Quick cover display (16) Quick cover keys (17) Nokia AV Connector (2.
Your phone Loudspeaker (23) Infrared port (24) Volume keys (25) USB Mini-B connector (26) The quick cover keys and quick cover display are hereafter referred to as the left, middle and right cover key and the cover display. ■ Standby mode When you have switched on the phone, and it is registered to a network, the phone is in the standby mode and ready for use. To change the profile, press the end key, and select a profile. FT To open the list of last dialed numbers, press the call key.
Your phone The phone is in offline mode and not connected to a cellular network. You have received one or several messages to the Inbox folder in Messaging. You have received new e-mail in your remote mailbox. There are messages waiting to be sent in Outbox. See “Outbox,” p. 40. You have missed calls. See “Recent calls,” p. 31. Shown if Ringing type is set to Silent and Message alert tone and E-mail alert tone are set to Off. See “Profiles,” p. 78. FT The phone keypad is locked.
Your phone A packet data connection is active in a part of the network that supports EGPRS. indicates the connection is on hold and that a connection is available. The icons indicate that EGPRS is available in the network, but your device is not necessarily using EGPRS in the data transfer. A UMTS packet data connection is active. indicates the connection is on hold and that a connection is available. Bluetooth is switched on. Data is being transmitted using Bluetooth. See “Bluetooth connection,” p. 96.
Your phone If you change the order of the functions in the menu, the order may differ from the default order described in this user guide. To close an application or a folder, select Back and Exit as many times as needed to return to the standby mode, or select Options > Exit. To display and switch between open applications, select and hold Menu. The application switching window opens, showing a list of open applications. Scroll to an application, and select it.
Your phone category list, indicated with , and a keywords list, indicated with , scroll left or right. To display the related help text, select it. ■ Volume control To adjust the earpiece or loudspeaker volume during a call or when listening to an audio file, press the volume keys. To activate the loudspeaker during a call, select Loudspeaker. To deactivate the loudspeaker during a call, select Handset.
Your phone To open Now playing in the music player, select . To play the track displayed in Now playing, select . To pause the playback and listen to another track from the currently playing track list, select , scroll to the track, and select . To exit the music player, in Now playing, select and hold . To start Visual Radio, select . To change to another saved station, select or . To search for stations, select and hold or . To access the list of saved stations, select .
Your phone ■ Connect a compatible headset Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV connector. When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV connector, pay special attention to volume levels.
Your phone Insert a memory card 1. Open the memory card slot door. 2. Place the memory card in the slot with the gold-colored contact area facing up. Push the card gently to lock it into place. 3. Close the memory card slot door. Remove a memory card 1. Open the memory card slot door. Wait until Remove memory card and press 'OK' is displayed. FT 2. Push the card gently to release it. Pull the card out. DR A 3. Close the memory card slot door.
Call functions 3. Call functions ■ Make a call 1. In the standby mode, enter the phone number, including the area code. Press the clear key to remove a number. For international calls, press * twice for the international prefix (the + character replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2. To call the number, press the call key. FT To adjust the volume during the call, press the volume keys. 3.
Call functions Voice dialing and voice commands A voice tag is added automatically to all entries in Contacts. Use long names, and avoid similar names for different numbers. Make a voice dialing call Voice tags are sensitive to background noise. Use voice tags in a quiet environment. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. 1. In the standby mode, press and hold the right selection key.
Call functions participants can still continue the conference call. To return to the conference call, select Options > Add to conference. • To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4. To end the conference call, press the end key. ■ Answer or reject a call To answer a call when the fold is open, press the call key. To answer a call when the fold is closed, open the fold, and the call is answered automatically.
Call functions Even if you have denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. To end the video call, press the end key. Call waiting (network service) During a call, to answer the waiting call, press the call key. The first call is put on hold. To end the active call, press the end key. To activate the Call waiting function, select Menu > Settings > Phone sett. > Phone > Call > Call waiting > Activate.
Call functions To be able to make a video call, you must be in the coverage of a UMTS network. You may need to use a USIM card to make video calls. For availability of and subscription to video call services, contact your service provider. A video call can only be made between two parties. The video call can be made to a compatible mobile phone or an ISDN client. Video calls cannot be made while there is another voice, video, or data call active.
Call functions Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider. To end the video call, press the end key. ■ Video sharing Use Video sharing to send live video from your mobile device to another compatible mobile device during a voice call.
Call functions Ask your service provider for the SIP profile settings, and save them in your device. Your service provider may send you the settings over the air. If you know a recipient’s SIP address, you can enter it on your contact card for that person. Select Menu > Contacts, a contact, and Options > Add detail > SIP. Enter the SIP address in the format sip:username@domainname (you can use an IP address instead of a domain name).
Call functions Accept an invitation When someone sends you a share invitation, an invitation message is displayed showing the sender’s name or SIP address. If your device is not set to Silent, it rings when you receive an invitation. If someone sends you a share invitation and you are not within UMTS network coverage, you will not know that you received an invitation. When you receive an invitation, select Accept to begin the sharing session, or Reject to decline the invitation.
Call functions Erase recent call lists To clear all recent call lists in the Recent calls view, select Options > Clear recent calls. To clear only one of the call registers, open the register you want to erase, and select Options > Clear list. General log To view the general log, select Menu > Log, and scroll right. To filter the log, select Options > Filter and the filter type. DR A FT To erase all the log contents permanently, select Options > Clear log > Yes.
Write text 4. Write text When you write text, appears on the top right of the display, indicating predictive text input, or appears, indicating traditional text input. To set the predictive text input on or off when writing text, press # repeatedly until the desired mode is active. , , or is displayed next to the text input indicator, indicating the character case. To change the character case, press #. indicates the number mode.
Write text 1. To write the desired word, press the keys 2–9. Press each key only once for one letter. The word changes after every keypress. For the most common punctuation marks, press 1. For more punctuation marks and special characters, press and hold *. To erase a character, press the clear key. To erase more characters, press and hold the clear key. 2. When you have finished the word and it is correct, to confirm it, scroll forward or insert a space.
Messaging 5. Messaging You can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, presentations, and documents. You can also receive messages and data using Bluetooth wireless technology, receive and forward picture messages, receive service messages and cell broadcast messages, and send service commands. To open the Messaging menu, select Menu > Messaging.
Messaging other marks, and characters from some language options, take up more space, limiting the number of characters that can be sent in a single message. Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Before you can send and receive an SMS message, a multimedia message, or an e-mail, or connect to your remote mailbox, you must have the correct connection settings in place.
Messaging To add a media object to an e-mail, select Options > Insert > Image, Sound clip, Video clip, Note or Template. 6. To send the message, select Options > Send. Nokia Xpress audio messaging Audio messages are multimedia messages that consist of a single sound clip. To create and send an audio message: 1. Select Menu > Messaging > New message > Audio message. 2. In the To field, press the scroll key to choose the recipients from Contacts, or enter the phone number or e-mail address.
Messaging To open a received message, select Menu > Messaging > Inbox and the desired message. Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. View multimedia objects To view the list of media objects that are included in the multimedia message, open the message, and select Options > Objects.
Messaging ■ Mailbox Select Menu > Messaging > Mailbox. Connect to mailbox? is displayed. Select Yes to connect to your mailbox (network service) or No to view previously retrieved e-mail messages offline. To connect to the mailbox afterwards, select Options > Connect. When you create a new mailbox, the name you give to the mailbox replaces Mailbox. You can have up to six mailboxes. When you are online, to end the data connection to the remote mailbox, select Options > Disconnect.
Messaging Delete e-mail messages To delete an e-mail from the phone while still retaining it in the remote mailbox, select Options > Delete > Phone only. The e-mail header stays in your phone. To remove the header as well, delete the e-mail message from your remote mailbox first, then connect your phone to the remote mailbox to update the status. To delete an e-mail from the phone and the remote mailbox, select Options > Delete > Phone and server.
Messaging 2. Mark the messages you want to copy. 3. To copy the marked messages, select Options > Copy and the folder to which you want to copy the messages. ■ Cell broadcast You may be able to receive messages on various topics, such as weather or traffic conditions from your service provider (network service). To turn on the service, see Cell broadcast in “Cell broadcast settings,” p. 45. Select Menu > Messaging > Options > Cell broadcast. A packet data connection may prevent cell broadcast reception.
Messaging Message validity — If the recipient of a message cannot be reached within the validity period, the message is removed from the message service center. Note that the network must support this feature. Message sent as — to define how the message is sent. Default is Text. Preferred connection — You can send text messages using the normal GSM network or packet data if supported by your network.
Messaging Receive report — If you want the status of the sent message (Pending, Failed, or Delivered) to be shown in Reports, select Yes. Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Deny report sending > Yes — to deny sending delivery reports Message validity (network service) — If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia message center.
Messaging messages and attachments, select Msgs. & attachs.. Size limit and Msgs. & attachs. are only available with POP3 mailboxes. Retrieval amount — To limit the number of messages to retrieve from the inbox of the remote mailbox, select From Inbox > No. of e-mails and enter the maximum number of messages to retrieve. You can also limit the number of messages to retrieve from other subscribed folders in From folders (only IMAP4 mailboxes).
Messaging Cell broadcast settings Check with your service provider whether cell broadcast (network service) is available and what the available topics and related topic numbers are. Select Menu > Messaging > Options > Settings > Cell broadcast and from the following settings: Reception — Select On or Off. Language — Select in which languages cell broadcast messages are received.
Contacts 6. Contacts You can save and manage contact information, such as names, phone numbers, and addresses. ■ Manage contacts Select Menu > Contacts. To add a new contact, select Options > New contact. Fill in the fields you want, and select Done. To edit a contact, scroll to it, and select Options > Edit. FT To assign default numbers and addresses to a contact, select it, and select Options > Defaults. Scroll to the desired default option, and select Assign.
Contacts ■ Add a ringing tone You can set a ringing tone for each contact and group. 1. Select Menu > Contacts. 2. To add a ringing tone to a contact, select the contact, Options > Ringing tone, and the desired ringing tone. To add a ringing tone to a group, scroll right to the groups list, and scroll to a contact group. Select Options > Ringing tone and the ringing tone for the group. To remove the personal or group ringing tone, select Default tone as a ringing tone.
Gallery 7. Gallery Select Menu > Gallery. Use Gallery to store and organize your images, video clips, music tracks, sound clips, track lists, streaming links, .ram files, and presentations. To open a folder (such as Images), select it. To open a file, select it. The file opens in its corresponding application. ■ Gallery functions Select Menu > Gallery and a folder. FT To set an image as your wallpaper, select Images, and scroll to the image. Select Options > Use image > Set as wallpaper.
Gallery To freeze the selected area, press the scroll key. To move the area within the picture, scroll. To select the area to be cropped, press the scroll key. To reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press the scroll key. A loop appears on the display. To resize the loop to fit the size of the eye, scroll up, down, left, or right. To reduce the redness, press the scroll key.
Gallery Remove—Removes the video clip from the video. Duplicate—Makes a copy of the selected video clip. Edit text (shown only if you added text)—To move, remove, or duplicate text; change the color and style of the text; define how long it stays on the screen; and add effects to the text. Edit image (shown only if you added an image)—To move, remove, or duplicate an image; define how long it stays on the screen; and set a background or a color effect to the image.
Media 8. Media ■ Camera To use the camera, select Menu > Media > Camera. To zoom in or out, scroll up or down. To capture an image, press the scroll key. The image is saved to Images in Gallery, and the image is displayed. To return to the viewfinder, select Back. To delete the photo, press the clear key. FT To capture images sequentially, select Options > Sequence mode > On, or press 4. In the sequence mode, the camera captures six images in short intervals and displays the images in a grid.
Media To change camera settings, select Menu > Media > Camera > Options > Settings. Select Image and from the following settings: Image quality and Image resolution — The better the image quality and the higher the resolution, the more memory the image consumes. Show captured image — To not display the image after capturing, select No. Default image name — Change how the captured images are named. Memory in use — Select whether you want to save your images in the phone memory or on the memory card.
Media You can select music to listen to from the music library in different ways. For example, to play a specific album, select Albums, scroll to the album, and select Options > Play. To listen to specific tracks on the album, select Albums and an album, mark the tracks, and select Options > Play. Track lists To compile and save your own track list, select Track lists > Options > New track list. Select the memory in which to save the track list, and enter a name for the track list.
Media Audio settings To adjust the tone of the sound and apply effects to the sound, select Options > Audio settings. Equaliser To enhance or diminish frequencies during music playback and modify how your music sounds, select Options >Audio settings > Equaliser. To use a preset, scroll to it, and select Options > Activate. Create a new preset 1. To create a new preset, select Options > New preset, and enter the preset name. 3. Select Back. ■ RealPlayer FT 2.
Media To stream live content, you must first configure your default access point. See “Access points,” p. 88. Many service providers require you to use an internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. In RealPlayer, you can only open an rtsp:// URL address. You cannot open an http:// URL address; however, RealPlayer recognizes an http link to a .ram file since a .
Media You can make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call. To open Visual Radio, select Menu > Media > Radio. To turn the radio off, select Exit. Tune and save a radio station To start the station search when the radio is on, select or . Searching stops when a station is found. To save the station, select Options > Save station. Select a location for the station. Enter the name of the station, and select OK.
Media View visual content To check availability and costs, and to subscribe to the service, contact your service provider. To view visual content of the current station, select . If the visual service ID was not saved in the station list, you are asked for the visual service ID. Enter the visual service ID, and select OK. If you do not have the visual service ID, select Retrieve to access the station directory (network service). To end the visual content feed but not the FM radio, select Close.
Media visual service ID of the tuned radio station is displayed. Select OK to start viewing the visual content. If there is more than one radio station with matching frequencies, the radio stations and their visual service ID are displayed in a list. Select the desired radio station. The tuned radio station and the visual service ID are displayed. Select OK to start viewing the visual content.
Media ■ Recorder The voice recorder allows you to record phone conversations and voice memos. If you record a phone conversation, all parties hear a beeping sound during recording. Recorded files are stored in Gallery. See “Gallery,” p. 48. . To DR A FT Select Menu > Media > Recorder. To record a sound clip, select listen to the recording, select .
Web 9. Web To browse web pages written in XHTML, WML, or HTML, select Menu > Web, or press and hold 0 in the standby mode. Check the availability of services, pricing, and tariffs with your service provider. Service providers also give you instructions on how to use their services. Important: Use only services that you trust and that offer adequate security and protection against harmful software.
Web Bookmarks are indicated by the following icons: The starting page defined for the default access point. The automatic bookmarks folder contains bookmarks ( collected automatically when you browse pages. ) that are Any bookmark showing the title or internet address of the bookmark. and may be replaced with the website’s icon. Add bookmarks manually 1. In the bookmarks view, select Options > Bookmark manager > Add bookmark. 3. Select Options > Save. Send bookmarks FT 2. Fill in the fields.
Web ■ Browse web pages Keys and commands for browsing To open a link, make selections, or check boxes, press the scroll key. To open a link in a new window, select Options > Window > Link in new window. To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages visited during a browsing session. To choose the desired page, scroll left or right, and select it.
Web through a large web page, Mini map opens and displays an overview of the web page you are browsing. To move in Mini map, scroll. When you stop scrolling, Mini map disappears and the area outlined in Mini map is displayed. Page overview With Page overview, you can move more quickly to the desired part of a web page. Page overview may not be available on all pages. Web feeds and blogs FT To show the page overview of the current page, press 8. To find the desired spot on the page, scroll up or down.
Web ■ Download You can download items such as ringing tones, images, operator logos, software, and video clips using the mobile browser. Once downloaded, items are handled by the respective applications on your phone, for example, a downloaded photo is saved in Gallery. Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing.
Web Security warnings — Hide or show security notifications. Java/Ecma Script — Enable or disable the use of scripts. Page Load images and sounds — Select whether to view pictures and hear sounds when you are browsing. If you select No, to later load images and sounds during browsing, select Options > Tools > Load images. Screen size — Choose how to use the display area for viewing pages. Default encoding — When you select Automatic, the browser automatically tries to choose the correct character encoding.
Web provider's network. Contact your service provider for information about data transmission charges. DR A FT Acc. point for auto-update — Select the desired access point for updating (only available when Automatic updates is on).
Download! 10. Download! Download! (network service) is a mobile content shop available on your device. You may be able to download some content free of charge. With Download! you can discover, preview, buy, download, and upgrade content, services, and applications. The items are categorized under catalogs and folders provided by different service providers. The available content depends on your service provider. Select Menu > Download!.
Organizer 11. Organizer ■ Clock Select Menu > Organiser > Clock. Clock settings To change the time or date, select Options > Settings. For more information about the settings, see “Date and time,” p. 82. Set an alarm FT 1. To set a new alarm, scroll right to Alarm, and select Options > New alarm. 2. Enter the alarm time, select whether and when the alarm is repeated, and select Done. When an alarm is active, is shown. DR A To cancel an alarm, scroll to the alarm, and select Options > Remove alarm.
Organizer your device is changed according to the city selected. Check that the time is correct and matches your time zone. ■ Calendar Select Menu > Organiser > Calendar. In the calendar, you can keep track of your appointments, meetings, birthdays, anniversaries, and other events. You can also set a calendar alarm to remind you of upcoming events. Create calendar entries 1. Select Options > New entry and an entry type. 2. Fill in the fields. FT Anniversary entries are repeated every year.
Organizer To go to a certain date, select Options > Go to date. Write the date, and select OK. To-do Select Options > To-do view. In the To-do view, you can keep a list of tasks that you need to do. Create a to-do note 1. To start to write a to-do note, press any number key (0–9). 2. Write the task in the Subject field. Set a due date and a priority for the task. ■ Notes FT 3. To save the to-do note, select Done. Select Menu > Organiser > Notes. To write a new note, start writing.
Applications 12. Applications ■ Calculator Select Menu > Applications > Utilities > Calculator. 1. Enter the first number of your calculation. 2. Scroll to an arithmetic function, and select it. 3. Enter the second number. 4. To execute the calculation, select . To add a decimal, press #. ■ Converter FT Note: This calculator has limited accuracy and is designed for simple calculations. Select Menu > Applications > Utilities > Converter.
Applications The conversion order changes if you write a value in the second amount field. The result is shown in the first amount field. Set a base currency and exchange rates Before you can convert currency, you need to choose a base currency (usually your domestic currency) and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies. 1. Select Currency as the measurement type, and select Options > Currency rates. FT 2.
Applications To zoom in or out, select Options > Zoom > In or Out. To find text, select Options > Find > Text, and enter the text you want to find. To find the next occurrence, select Options > Find > Next. To rotate the document, select Options > View > Rotate left or Rotate right. To save a copy of the document, select Options > Save, and specify where to save it. Settings Select Options > Settings and from the following settings: FT Default zoom % — to set the default zoom when opening a .
Applications View Word documents To move in the document, scroll. To search the document for text, select Options > Search options > Find. Quicksheet With Quicksheet, you can read Microsoft Excel files on the display of your device. Quicksheet supports the viewing of spreadsheet files saved in .xls format in Microsoft Excel 97, 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. FT View spreadsheets To move around in the spreadsheet, scroll.
Applications View presentations To move between the slide, outline, and the notes view, scroll left or right. To move to the next or previous slide in the presentation, scroll down or up. To view the presentation in full screen, select Options > Full screen. To expand items in the presentation outline in the outline view, select Options > Expand. Quickmanager FT With Quickmanager, you can download software, including updates, upgrades, and other useful applications.
Applications In GPS data and Landmarks, coordinates are expressed in degrees and decimal degrees format using WGS-84 coordinate system. ■ Landmarks Landmarks are coordinates to geographic locations that you can save to your device for later use in different location-based services. You can create landmarks using a Bluetooth GPS enhancement or network (network service). Select Menu > Applications > My own > Landmarks.
Applications DR A FT If you enable the 3-D tones but do not select any 3-D effect, stereo widening is applied to the ringing tone.
Settings 13. Settings ■ Profiles Select Menu > Settings > Profiles. In Profiles, you can adjust and personalize the phone tones for different events, environments, or caller groups. You can see the currently selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown. To activate the profile, select the profile and Activate. FT Tip: To quickly change to Silent from any other profile, in the standby mode, press and hold #.
Settings Alert for — Set the phone to ring only upon calls from phone numbers that belong to a selected contact group. Phone calls coming from people outside the selected group have a silent alert. Profile name — Name the profile. This setting is not shown for the General and Offline profiles. When using Offline, the phone is not connected to the cellular network. If no SIM card is installed, to use some functions of the phone, start the phone in Offline.
Settings To manage the voice commands, scroll to a function, select Options and from the following options: Change command or Remove application — to change or deactivate the voice command of the selected function Playback — to play the activated voice command To use voice commands, see “Voice dialing and voice commands,” p. 25.
Settings Standby mode Active standby — to enable or disable active standby. See “Active standby,” p. 16. Active standby apps. — to select the application shortcuts to appear in the active standby. This setting is available only if Active standby is set to On. Shortcuts— to assign shortcuts for the right and left selection keys, scrolling in different directions or pressing the scroll key in the standby mode. The scroll key shortcuts are not available if Active standby is On.
Settings Date and time Time and Date — to set the time and date Time zone — to set the time zone of your location. If you set Network operator time > Auto-update, the local time is shown. Date format — to select the format to display dates Date separator — to select the date separator Time format — to select between 24-hour and 12-hour time format Time separator — to select the time separator Clock type — to select whether the analog or digital clock is shown in the standby mode. See “Clock,” p. 68.
Settings Answer if fold opened — to set whether opening the fold answers an incoming call Sleep mode — to set whether the cover display is switched off when the power saver time-out is reached. To switch on the cover display when the sleep mode is active, press the left, middle, or right cover key. Security Select Phone and SIM card, Certificate management, or Security module. Phone and SIM card You can change the following codes: lock code, (U)PIN code, and PIN2 code.
Settings When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing), calls may be possible to the official emergency number programmed into your device. Confirm SIM services (network service) — to set the phone to display confirmation messages when you use a SIM card service Certificate management A list of authority certificates that have been stored in your phone is displayed in Certificate management.
Settings checks the validity of the certificate and one of the following notes may appear: Expired certificate — The validity period has ended for the selected certificate. Certificate not valid yet — The validity period has not yet begun for the selected certificate. Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Certificate not trusted — You have not set any application to use the certificate.
Settings Phone Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or Network. Call Send my caller ID (network service) — to set your phone number to be displayed (Yes) or hidden (No) from the person whom you are calling. The value may be set by your service provider when you subscribe to the service (Set by network). FT Call waiting (network service) — to set the network to notify you of a new incoming call while you have a call in progress.
Settings Line in use (network service) — shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending short messages. Calls on both lines can be answered irrespective of the selected line. You cannot make calls if you select Line 2 and have not subscribed to this network service. To prevent line selection, select Line change > Disable if supported by your SIM card.
Settings Network Network mode — To select which network to use (shown only if supported by the service provider). If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. FT Operator selection — To set the phone to search for and select automatically one of the available networks, select Automatic. To select the desired network manually from a list of networks, select Manual.
Settings Check which kind of access point you need with your service provider for the service you wish to access. For availability and subscription to data connection services, contact your service provider. You may receive access point settings in a message from your service provider, or you may have preset access point settings in your phone. To create a new access point or edit an existing access point, select Options > New access point or Edit.
Settings packet data connection can be closed when it is not needed by any application. If there are no packet data services available and you have chosen When available, the phone periodically tries to establish a packet data connection. Access point — The access point name is needed when you want to use your phone as a modem with your computer. Data call The data call settings affect all access points that use a GSM data call.
Settings ■ Speed dial To assign phone numbers to the speed dialing keys, select Menu > Settings > Speed dial, scroll to the speed dialing key, and select Options > Assign. Select the contact and the number for the speed dial. To view the number assigned to a speed-dialing key, scroll to the speed dialing key, and select Options > View number. To change or remove the number, select Change or Remove.
Settings ■ Instant messaging Instant messaging (IM) allows you to converse with others and join discussion forums (IM groups) with specific topics (network service). Check the availability of IM services, pricing, and tariffs with your service provider. Service providers also provide instructions on how to use their services. Connect to an IM server Select Menu > Settings > IM. 1. To log in, select Options > Log in. 2. Enter your user ID and password.
Settings Join and leave an IM group Select Menu > Settings > IM > IM groups. IM groups are only available if supported by the service provider. To join an IM group, select it. To join an IM group not on the list, but whose group ID you know, select Options > Join new group, and enter the group ID. To leave the IM group, select Options > Leave IM group. Search for IM groups and users FT To search for groups, select Menu > Settings > IM > IM groups > Options > Search.
Settings Start and view individual conversations Select Menu > Settings > IM > Conversations. This shows a list of the IM users with whom you have an ongoing conversation. next to a user indicates that you have received a new message from that user. To view an ongoing conversation, select the user. To send a message, write your message, and press the scroll key. To return to the conversations list without closing the conversation, select Back.
Settings Restrict access to an IM group DR A FT To create a closed IM group, create a group members list. Only the users on the list are allowed to join the group. Select the IM groups view, scroll to the group, and select Options > Group > Settings > Group members > Selected only.
Connectivity 14. Connectivity ■ PC Suite You can use your phone with a variety of PC connectivity and data communications applications. With PC Suite you can synchronize contacts, calendar and to-do notes and notes between your phone and a compatible PC, or a remote internet server (network service). You may find more information about PC Suite and the download link in the support area on the Nokia website, www.nokia.com/support.
Connectivity My phone's visibility > Shown to all — to allow your phone to be found by other Bluetooth devices at all times. To allow your phone to be found for a defined time period, select Define period. For security reasons it is advisable to use the Hidden setting whenever possible. My phone's name — to define a name for your phone.
Connectivity • Create your own passcode (1–16 digits) and agree with the owner of the other device to use the same code. You do not have to memorize the passcode. • After pairing, the device is saved to the Paired devices view. 6. When the connection has been successfully established, the note Sending data is displayed. Data received using Bluetooth connection can be found in Inbox in Messaging. Paired devices view FT Paired devices are indicated by in the search result list.
Connectivity Disconnect Bluetooth connection A Bluetooth connection is disconnected automatically after sending or receiving data. ■ USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC. You can also use the USB data cable with Nokia PC Suite. Select Menu > Settings > Connectivity > USB. To select the default USB connection mode, select USB mode and the desired mode.
Connectivity 3. To send, locate the desired file in an application or the file manager, and select Options > Send > Via infrared. If data transfer is not started soon after the activation of the infrared port, the connection is cancelled and must be started again. You may not be able to receive data using infrared when the loudspeakers are in use. All items received through infrared are placed in the Inbox folder in Messaging. ■ Remote synchronization Select Menu > Settings > Connectivity > Sync.
Connectivity Server version, Server ID, Data bearer, Host address, Port, User name, and Password — Contact your service provider or system administrator for the correct settings. Access point — Only visible if Internet is selected as Data bearer. Select an access point you want to use for the data connection.
Connectivity End connections To end a connection, scroll to the connection, and select Options > Disconnect. To end all connections, select Options > Disconnect all. ■ Modem Before you can use your device as a modem: • Acquire the appropriate data communications software for your computer. • Subscribe to the appropriate network services from your service provider or internet service provider. FT • Install the appropriate drivers on your computer. Select Menu > Settings > Connectivity > Modem.
Connectivity In PTT communication, one person talks while the others listen. Speakers take turns responding to each other. Only one group member can talk at a time. The length of time of each turn is limited. Phone calls always take priority over PTT calls. Besides the packet data counters, the phone registers only one-to-one calls in the recent calls lists in Log.
Connectivity Callback request tone — Select a tone for callback requests. Application start-up — To start PTT automatically, select Always automatic. To start PTT automatically only while in your home network, select Auto. in home netw.. Default nickname — Enter your nickname shown to other users. Your service provider may have disabled the editing of this option. Show my PTT address — Select Never if you want to hide your PTT address from others.
Connectivity 2. When the connection has been established, to talk to the other participant, press and hold the PTT key while you talk. 3. To end the PTT call, select Disconnect, or if there are several PTT calls, select Options > Disconnect. Answer a PTT call If Accepted list calls is set to Notify in User settings, a short tone notifies you of an incoming call. To accept the call, select Accept. To silence the tone, select Silence. To reject the call, press the end key.
Connectivity Create your own channel 1. Select Options > PTT channels. 2. Select Options > New channel > Create new. 3. Enter a Channel name. 4. Select a Channel privacy level. 5. Enter your own nickname in Nickname. 6. If you want to add a thumbnail image to the group, select Thumbnail and an image. 7. Select Done. When you have created a channel, you are asked if you want to send channel invitations. Channel invitations are text messages.
Connectivity To switch the loudspeaker on or off, select Options > Activate loudspeaker or Deactivate loudspeaker. To disconnect the selected PTT session, select Options > Disconnect. ■ Data transfer With Data transfer, you can copy or synchronize contacts, calendar entries, and possibly other data, such as video clips and images, from a compatible phone using a Bluetooth or infrared connection. When both Bluetooth and infrared are available on both devices, it is preferable to use Bluetooth.
Data manager 15. Data manager ■ Application manager You can install two types of applications and software to your phone: J2METM applications based on JavaTM technology with the extension .jad or .jar. PersonalJavaTM applications cannot be installed on your phone. Other applications and software suitable for the Symbian operating system. The installation files have the .sis extension. Only install software specifically designed for your phone.
Data manager The .jar file is required for installing Java applications. If it is missing, the phone may ask you to download it. To install an application or software package: 1. Scroll to an installation file. Applications on the memory card are indicated with . 2. Select Options > Install. Alternatively, search the phone memory or the memory card, select the application, and press the scroll key to start the installation.
Data manager Java applications may attempt to, for example, establish a data connection or send a message. To edit the permissions of an installed Java application and define which access point the application will use, in the main view, scroll to the application, and select Options > Open. ■ File manager Select Menu > Settings > Data mgr. > File mgr.. In the file manager, you can browse, open, and manage files and folders in the phone memory or on the memory card.
Data manager Contact your service provider, or company information management department for the other server profile settings. ■ Memory card Keep all memory cards out of the reach of small children. Select Menu > Settings > Data mgr. > Memory. For details on inserting a memory card into the phone, see “MicroSD card slot,” p. 22. You can use it to store your multimedia files such as video clips, music tracks, and sound files, photos, and messaging data, and to back up information from phone memory.
Data manager Unlock a memory card If you insert another password-protected memory card into your phone, you are prompted to enter the password of the card. To unlock the card, select Options > Unlock memory card. Check memory consumption To check the memory consumption and the amount of memory available on your memory card, select Options > Memory details. ■ Activation keys Select Menu > Settings > Data mgr. > Actv. keys to view the digital rights activation keys stored in your phone.
Data manager content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content. Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content. If your device has OMA DRM protected content, to back up both the activation keys and the content, use the backup feature of Nokia PC Suite.
Battery information 16. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Battery information Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help. ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety.
Battery information 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. FT 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/ batterycheck.
Enhancements 17. Enhancements Practical rules about accessories and enhancements • Keep all accessories and enhancements out of the reach of small children. • When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord. • Check regularly that enhancements installed in a vehicle are mounted and are operating properly. DR A FT • Installation of any complex car enhancements must be made by qualified personnel only.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.
Additional safety information Additional safety information ■ Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body.
Additional safety information • Not carry the wireless device in a breast pocket. • Hold the wireless device to the ear opposite the medical device to minimize the potential for interference. • Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. • Read and follow the directions from the manufacturer of their implanted medical device.
Additional safety information areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress.
Additional safety information ■ Certification information (SAR) THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
Index Index access codes barring password 10 change 83 lock code 9, 13 PIN 9, 13 PUK 9 access points 88 activation keys 112 active standby 16 Adobe Reader 72 alarm clock. See clock. application manager 108 applications 108 B C D data cable 99 data connection indicators 16 data transfer 107 device manager 110 downloading 64 DR A battery charging 12 Bluetooth connection settings 96 disconnecting 99 paired devices 98 receiving data 98 sending data 97 bookmarks 60–61 browser. See web.
Index I K keyguard. See keypad lock. keypad lock 20 L log 31 M library 52 listening to music 53 N network 88 notes 70 O office applications 73 one-touch dial. See speed dialing. P phone memory 110 phonebook. See contacts. profiles 78 PTT. See push to talk. push to talk 102–107 FT IM. See instant messaging. indicators 16 infrared 99 instant messaging connecting 92 contacts 94 conversation 94 groups 93, 94 settings 92 Q quick cover 20 Quickoffice 73 DR A media player. See RealPlayer.
Index calling 24 standby mode 16 synchronization 100 voice recorder. See recorder. volume 20 W text input 33–34, 81 themes 79 to-do 70 U USB. See data cable. V DR A video call 26, 27 Visual Radio 55 voice commands 79 voice dialing 25 web blogs 63 browser settings 64 browsing 62 connecting 60 connection security 61 disconnecting 64 feeds 63 saving a page 63 settings 60 viewing a saved page 63 viewing bookmarks 60 writing text.
