User Manual

Messaging
32
function. To use the e-mail function on your phone, you need a compatible
e-mail system.
You can write, send, and read e-mail with your phone. You can also save and
delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4
e-mail servers.
Before you can send and retrieve any e-mail messages, you must do the
following:
• Obtain a new e-mail account or use your current account. To check the
availability of your e-mail account, contact your e-mail service provider.
• Check your e-mail settings with your network operator or e-mail service
provider. You may receive the e-mail configuration settings as a
configuration message. See
Configuration settings service, p. 9. You can
also enter the settings manually. See
Configuration, p. 58.
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See
E-mail messages, p. 41.
This application does not support keypad tones.
Setting wizard
The setting wizard will start automatically if no e-mail settings are defined in the
phone. To enter the settings manually, select Menu > Messaging > E-mail >
Options > Manage accounts > Options > New.
The Manage accounts options allow you to add, delete, and change the e-mail
settings after they are defined. Make sure that you have defined the correct
preferred access point for your operator. See
Configuration p. 58.
The e-mail application requires an internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > E-mail > Write new e-mail.
2. If more than one e-mail account is defined, select the account from which
you want to send the e-mail.
3. Enter the recipient’s e-mail address.
4. Write a subject for the e-mail.