Dr af t Nokia 6103 User Guide FCC Draft Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-161 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
Contents For your safety.......................... 6 General information ................. 9 Overview of functions........................... 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications 11 Nokia support on the Web ............... 11 1. Get started ......................... 12 Open the fold ....................................... Install the SIM card and the battery ............................................
Call........................................................... 54 Phone ...................................................... 54 Connectivity.......................................... 55 Enhancements ...................................... 59 Configuration........................................ 59 Security .................................................. 60 Restore factory settings..................... 61 10. Operator menu ................ 62 11. Gallery.............................. 62 12. Media .....
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE), see “Packet data (EGPRS),” p. 58 • Extensible hypertext markup language (XHTML), see “Web,” p. 83 • Audio messaging, see “Nokia Xpress audio messaging,” p.
General information The module PIN is required to access the information in the security module. See “Security module,” p. 89. The signing PIN is required for the digital signature. See “Digital signature,” p. 90. PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.
General information To discard the received settings, select Exit or Show > Discard. To edit the settings, see “Configuration,” p. 59. ■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.
Get started 1. Get started ■ Open the fold When you open the fold of the phone, it opens up to approximately 155 degrees. Do not try to force the fold open more. Dr af t ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
Get started Insert the SIM card (5). Make sure that the SIM card is properly inserted, and that the golden contact area on the card is facing downwards. Close the SIM card holder (6) and press it until it snaps into position. Replace the battery (7). Observe the battery contacts. Always use original Nokia batteries. See “Nokia battery authentication guidelines,” p. 95. Dr af t Slide the back cover into its place (8, 9).
Get started ■ Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Press and hold the power key. See “Keys and parts,” p. 15. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.
Your phone 2.
Your phone Warning: The side keys (6) and (9) and the antenna cap of this device may contain nickel. These parts are not designed for prolonged contact with the skin. Continuous exposure to nickel on the skin may lead to a nickel allergy. ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Your phone • Function of the right selection key is Names (6) or another shortcut to a function that you selected. See “My shortcuts,” p. 52. Operator variants may have an operator-specific name to access an operator-specific Web site. Personal shortcut list The left selection key is Go to. To view the functions in the personal shortcut list, select Go to. To activate a function select it. To view a list with available functions, select Go to > Options > Select options.
Your phone Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 26. You received one or several multimedia messages. See “Read and reply to a multimedia message,” p. 28. The phone registered a missed call. See “Call register,” p. 50. The keypad is locked. See “Keypad lock (keyguard),” p. 18. The phone does not ring for an incoming call or text message when Incoming call alert and Message alert tone are set to Off. See “Tones,” p. 51.
Your phone To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see “Phone,” p. 54. Dr af t When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. Dr af t 3. To end the call or to cancel the call attempt, press the end key, or close the phone.
Call functions To mute the ringing tone, press one of the volume keys, or select Silence. Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox) rejecting an incoming call also diverts the call. See “Call,” p. 54. If a compatible headset supplied with the headset key is connected to the phone, to answer and end a call, press the headset key. Call waiting To answer the waiting call during an active call, press the call key. The first call is put on hold.
Write text 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top left of the display.
Write text If ? is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Enter the word (traditional text input is used), and select Save. 3. Start writing the next word. Write compound words Enter the first part of the word, and press the navigation key right to confirm it. Write the next part of the word, and confirm the word.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu, and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call). Dr af t 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer).
Messages 6. Messages The message services can only be used if they are supported by your network or your service provider. Note: When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Messages Write and send a SMS message 1. Select Menu > Messages > Create message > Text message. 2. Enter a message. See “Write text,” p. 22. To insert text templates or a picture into the message, see “Templates,” p. 27. Each picture message comprises several text messages. Sending one picture or multipart message may cost more than sending one text message. 3. To send the message, select Send > Recently used, To phone number, To many, or To e-mail address.
Me s s a g e s Templates Your phone has text templates and picture templates can use in text, picture, or SMS e-mail messages. that you To access the template list, select Menu > Messages > Saved items > Text messages > Templates. ■ Multimedia messages A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip. If the message is too large, the phone may not be able to receive it.
Messages Slide — to insert a slide to the message. Your phone supports multimedia messages that contain several pages (slides). Each slide can contain text, one image, a calendar note, a business card, and one sound clip. To open a desired slide if the message contains several slides, select Options > Previous slide, Next slide, or Slide list. To set the interval between the slides, select Options > Slide timing.
Messages When your phone receives a multimedia message, the animated displayed. When the message has been received, and the text Multimedia message received are shown. is 1. To read the message, select Play. To view it later, select Exit. To read the message later, select Menu > Messages > Inbox. In the list of messages, indicates an unread message. Select the message that you want to view. 2. The function of the middle selection key changes according to the currently displayed attachment in the message.
Messages ■ Folders The phone saves received text and multimedia messages in the Inbox folder. Multimedia messages that have not yet been sent are moved to the Outbox folder. If you select Menu > Messages > Message settings > Text messages > Save sent messages > Yes, and Menu > Messages > Message settings > Multimedia msgs. > Save sent messages > Yes, the sent messages are saved in the Sent items folder.
Messages Receive a flash message A received flash message is not automatically saved. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save the message. ■ Nokia Xpress audio messaging With this menu, use the multimedia message service to create and send a voice message in a convenient way.
Messages To save the message, select Options > Save sound clip and the folder in which you want to save the message. ■ Instant messaging Instant messaging (network service) is a way to send short, simple text messages to online users. Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your service provider, from whom you also receive your unique ID, password, and settings.
Messages Connect to the instant messaging service To connect to the instant messaging service, enter the Instant messages menu, activate an instant messaging service, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Logout. Start an instant messaging session Open the Instant messages menu, and connect to the service. Start the service in different ways.
Messages address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID. To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group. Start a conversation from Contacts, see “View the subscribed names,” p. 46.
Messages Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2. To view and edit your own availability information, or screen name, select My settings. 3. To allow all the other instant messaging users to see you when you are online, select Availability > Available for all. To allow only the contacts on your instant messaging contact list to see you when you are online, select Availability > Avail. for contacts.
Messages Groups You can create your own private groups for an instant messaging conversation, or use the public groups provided by the service provider. The private groups exist only during an instant messaging conversation. The groups are saved on the server of the service provider. If the server you are logged on to does not support group services, all group-related menus are dimmed. Public groups Dr af t Groups — You can bookmark public groups that your service provider may maintain.
Messages configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 59. To activate the e-mail settings, select Menu > Messages > Message settings > E-mail messages. See “E-mail,” p. 41. This application does not support keypad tones. Write and send an e-mail 1. Select Menu > Messages > E-mail > Create e-mail. 2. Enter the recipient’s e-mail address, a subject, and the e-mail message.
Messages Select Menu > Messages > E-mail > Inbox and the desired message. While reading the message, select Options to view the available options. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply. To send the message, select Send > Send now. Inbox and other folders Dr af t Your phone saves e-mail that you have downloaded from your e-mail account in Inbox folder.
Messages ■ Info messages Select Menu > Messages > Info messages. With the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. ■ Service commands Select Menu > Messages > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services.
Messages Automatic resending > On — The phone automatically attempts to resend a text message, if the sending has failed. Multimedia The message settings affect the sending, receiving, and viewing of multimedia messages. Select Menu > Messages > Message settings > Multimedia msgs.
Messages E-mail The settings affect the sending, receiving, and viewing of e-mail. You may receive the configuration settings for the e-mail application as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 59. To activate the settings for the e-mail application, select Menu > Messages > Message settings > E-mail messages and from the following options: Configuration — Select the set that you would like to activate.
Messages ■ Message counter Dr af t Select Menu > Messages > Message counter for approximate information on your recent communications.
Contacts 7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM card memory. See “Settings,” p. 47. The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM card memory, are indicated by . ■ Search for a contact Dr af t Select Menu > Contacts > Names > Options > Search.
Contacts To add another detail select a text type or an image from Gallery. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 45. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. To change the number type, scroll to the desired number, and select Options > Change type.
Contacts To delete a contact, search for the desired contact, and select Options > Delete contact. To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from Gallery.
Contacts Select Menu > Contacts > My presence and from the following options: Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service. View my presence — to view the status in Private pres. and Public presence. Edit my presence — to change your presence status. Select My availability, My presence message, My presence logo, or Show to.
Contacts The status information of the first contact on the subscribed names list is displayed. The information that the person wants to give to the others may include text and some of the following icons: , , or available. indicates that the person is available, discreet, or not indicates that the person’s presence information is not available. 2. Select Details to view the details of the selected contact or Options > Subscribe new, Chat, Send message, Send bus. card, or Unsubscribe.
Contacts Before using voice tags, note that: • Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment. • Very short names are not accepted. Use long names and avoid similar names for different numbers.
Contacts 2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds. If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing. ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change.
Call register 8. Call register The phone registers the phone numbers of identified missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. Dr af t To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end.
Settings If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds. To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. ■ My shortcuts With personal shortcuts, you get quick access to often used functions of the phone.
Settings image or a graphic from the Gallery. Select Select slide set and a folder in the Gallery to use the images in the folder as a slide set. To download more images for the screen saver, select Graphic downloads. Power saver > On — to save some battery power. A digital clock is displayed when no function of the phone is used for a certain time.
Settings ■ Call Select Menu > Settings > Call and from the following options: Automatic volume control — to set the phone to automatically adjust the speaker volume according to the background noise Call divert (network service) — to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. See Call barring service in “Security,” p. 60.
Settings mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes. Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Settings Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduces the battery life. Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters.
Settings Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name. If you are concerned about security, turn off Bluetooth or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. Infrared Dr af t You can set up the phone to send and receive data through its infrared (IR) port.
Settings Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet. The applications that may use packet data are MMS, browsing sessions, e-mail, Push to talk, remote SyncML, Java application downloading, and the PC dial-up.
Settings ■ Enhancements This menu is shown only if the phone is or has been connected to a compatible mobile enhancement. Select Menu > Settings > Enhancements. You can select an enhancement menu if the corresponding enhancement is, or has been connected to the phone.
Settings default settings, select Options > Set as default. To delete configuration settings, select Delete. Activate default in all applications — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Settings Security level > Phone — the phone asks for the security code whenever a new SIM card is inserted into the phone. Select Memory and the phone asks for the security code when SIM card memory is selected and you want to change the memory in use.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 87. Dr af t 11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, and tones.
Media 12. Media Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.
Media ■ Radio The FM radio depends on an antenna other than the wireless devices antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio.
Media Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna. Set frequency — to enter the frequency of the desired radio channel You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.
Organiser 13. Organiser ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. Dr af t To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organiser week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes. Other options for the day view may be Make a note, Delete, Edit, Move, or Repeat a note; Copy a note to another day; Send note as text message, multimedia message, with IR, or Bluetooth technology to the calendar of another compatible phone. In Settings you can set the date and time settings.
Organiser ■ Notes To use this application for writing and sending notes, select Menu > Organiser > Notes. To create a note if no note is added, select Add note; otherwise, select Options > Make a note. Write a note, and select Save. Other options for notes include deleting, and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices using a text message, a multimedia message, Bluetooth technology, or IR.
Organiser 3. Select Menu > Organiser > Sync > Server sync > Synchronise. The marked data of the active set is synchronized after confirmation. Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete, if the contacts or calendar are full. Synchronization settings You may receive the configuration settings required for synchronization as a configuration message from the network operator or service provider.
Organiser ■ Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values. Note: This calculator has limited accuracy and is designed for simple calculations. Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation. Press # for a decimal point. Select Options >Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number.
Organiser time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key. Continue — to view the timing that you have set in the background Show last — to view the most recently measured time if the stopwatch is not reset View times or Delete times — to view or delete the saved times ■ Countdown timer Dr af t Select Menu > Organiser > Timer.
Applications 14. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 73. Dr af t Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See “Bookmarks,” p. 86.
Applications Other application options Delete — to delete the application or application set from the phone Move — to move an application or game to an other folder Details — to view additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) App. access — to restrict the application from accessing the network. Different categories are shown.
Applications Use the Nokia Application Installer in PC Suite to download the applications to your phone. Dr af t Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
Push to talk 15. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect to, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the person or group you are calling does not have to answer the phone.
Push to talk • To set the required settings for the PTT connection, select Config. settings. • To open the browser and to connect to the PTT network portal provided by the service provider, select Web. ■ Connect to PTT Dr af t To connect to the PTT service, select Menu > Push to talk > Switch PTT on. indicates the PTT connection. indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service until you disconnect from the PTT service.
Push to talk The icon behind the contact in the list denotes current login status: , , or indicate that the person is either available, unavailable, or unknown, indicates that the login status is not available. The login status is only available for subscribed contacts. To change the subscribed contacts, select Options and from the available contact list options, Subscribe contact or Unsubscr. contact, or if one or more contacts are already marked Subscribe marked or Unsubscr. marked.
Push to talk To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired nickname, and press the PTT key. Receive a PTT call A short tone notifies you of an incoming group and one-to-one call. When receiving a group call, the group name and the nickname of the caller are displayed.
Push to talk • To send a callback request from Contacts, search for the desired contact, select Options > Contact details, scroll to the PTT address, and select Options > Send callback. • To send a callback request from the group list in the PTT menu, select Group list, and scroll to the desired group. Select Options > Active members, scroll to the desired contact, and select Options > Send callback.
Push to talk • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the group list, connect to the PTT service, select Group list, and scroll to the desired group. Select Options > Active members. Scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add to contact.
Push to talk to the group. Enter the name for the group. Select Default, Listened, or Inactive. The phone indicates that the group is saved and its status. Default and Listened are active groups. When you press the PTT key to make a group call, the default group is called if you have not scrolled to any other group or contact. To send an invitation to the group, select Yes when the phone requests it. You can send the invitation using a text message, Bluetooth technology or IR.
Push to talk Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations that support the PTT service are shown. Account — to select a PTT service account contained in the active configuration settings PTT user name, Default nickname, PTT password, Domain, and Server address To edit the PTT settings for use, select Menu > Push to talk > PTT settings.
Web 16. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. Dr af t With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web Secondly, make a connection to the service in one of the following ways: • Select Menu > Web > Home; or in the standby mode, press and hold 0. • To select a bookmark of the service, select Menu > Web > Bookmarks. • To select the last URL, select Menu > Web > Last web address. • To enter the address of the service, select Menu > Web > Go to address, enter the address of the service, and select OK. ■ Browse pages Dr af t After you make a connection to the service, you can start browsing its pages.
Web empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache, see “Cache memory,” p. 88. Direct calling The browser supports functions that you can access while browsing. You can make a phone call, send DTMF tones while a voice call is in progress, and save a name and a phone number from a page. ■ Appearance settings Dr af t While browsing, select Options > Other options > Appear.
Web ■ Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 88. While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. ■ Scripts over secure connection You can select whether to allow the running of scripts from a secure page.
Web discard the bookmark directly after you have received the bookmark, select Exit. ■ Download files To download more tones, images, games, or applications to your phone (network service), select Menu > Web > Downloads > Tone downloads, Graphic downloads, Game downloads, Video downloads, Theme downloads, or App. downloads. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.
Web To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels. To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.
Web ■ Browser security Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider. Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature.
Web Certificates Important: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime.
Web Check that the header text is Read and that the digital signature icon is shown. If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN. To sign the text, read all of the text first, and select Sign. The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing. Dr af t Select the user certificate you want to use.
SIM services 17. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
PC connectivity 18. PC connectivity You can send and receive email, and access the Internet when your phone is connected to a compatible PC through an infrared or a data cable (CA-42) connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ PC Suite With PC Suite you can synchronize Contacts, calendar and to-do notes, and notes between your phone, and the compatible PC, or a remote Internet server (network service).
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276 To create a text message, • for countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.
Technical Information 20. Technical Information Weight 97 grams (3.4 ounces) incl. BL-4C battery Battery 820 mAh Li-Ion Battery Networks Wireless networks 900, 1800 and 1900 Size Volume: Length: Width: Thickness: Frequency range (Rx) GSM 900: 925 - 960 MHz GSM1800: 1805 - 1865 MHz GSM1900: 1930 - 1990 MHz Frequency range (Tx) GSM 900: 880 - 915 MHz GSM 1800: 1710 - 1785 MHz GSM1900: 1850 - 1910 MHz Tx output power Up to 2 W Battery voltage 3.7 V DC Dr af t 4.7 cubic inches (77 ccm) 3.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Dr af t Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • always keep the device more than 15.3 centimeter (6 inches) from their pacemaker when the device is switched on; • not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your device immediately. Hearing aids Some digital wireless devices may interfere with some hearing aids.
Additional safety information ■ Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.
Additional safety information ■ Certification information (SAR) THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Dr af t Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. Dr af t 2.
APPENDIX times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
APPENDIX What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
APPENDIX exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
APPENDIX key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
APPENDIX then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.
APPENDIX the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate.
Index A access codes . . . . . . . . . . . . . . . . . . . .9 accessories. See enhancements. alarm clock . . . . . . . . . . . . . . . . . . . .66 antenna . . . . . . . . . . . . . . . . . . . . . .14 applications . . . . . . . . . . . . . . . . . . .72 download . . . . . . . . . . . . . . 11, 73 audio messaging . . . . . . . . . . . . . . .31 B Dr af t barring password . . . . . . . . . . . . . . .10 battery authentication . . . . . . . . . . . . . .95 charge status . . . . . . . . . . . . . . .
Index voice dialing . . . . . . . . . . . . . . . 47 cookies . . . . . . . . . . . . . . . . . . . . . . . 86 countdown timer . . . . . . . . . . . . . . 71 counters . . . . . . . . . . . . . . . . . . . . . . 50 CSD . . . . . . . . . . . . . . . . . . . . . . . . . 93 CTIA . . . . . . . . . . . . . . . . . . . . . . . . 103 customer service . . . . . . . . . . . . . . . 11 D G gallery . . . . . . . . . . . . . . . . . . . . . . . 62 games . . . . . . . . . . . . . . . . . . . . . . . . 72 group call . .
Index keypad lock . . . . . . . . . . . . . . . . . . . .18 keys call key . . . . . . . . . . . . . . . . . . . .15 end key . . . . . . . . . . . . . . . . . . . .15 keyguard . . . . . . . . . . . . . . . . . . .18 keypad . . . . . . . . . . . . . . . . . . . .15 keypad lock . . . . . . . . . . . . . . . .18 navigation key . . . . . . . . . . . . . .15 power on/off . . . . . . . . . . . . . . .15 PTT key . . . . . . . . . . . . . . . . . . . .15 push to talk key . . . . . . . . . . . . .15 selection keys .
Index to-do list . . . . . . . . . . . . . . . . . . 67 P radio . . . . . . . . . . . . . . . . . . . . . . . . . 64 recent calls list . . . . . . . . . . . . . . . . 50 recorder . . . . . . . . . . . . . . . . . . . . . . 65 repair service . . . . . . . . . . . . . . . . . . 11 ringing tones . . . . . . . . . . . 51, 62, 87 S safety additional information . . . . . . . 99 emergency calls . . . . . . . . . . . . 101 explosive environments . . . . . 101 guidelines . . . . . . . . . . . . . . . . . .
Index T traditional text input . . . . . 22, 23 writing . . . . . . . . . . . . . . . . . . . 22 text message . . . . . . . . . . . . . . . . . 25 templates . . . . . . . . . . . . . . . . . 27 themes . . . . . . . . . . . . . . . . . . . . . . 51 time settings . . . . . . . . . . . . . . . . . . 53 timers . . . . . . . . . . . . . . . . . . . . . . . 50 to-do list . . . . . . . . . . . . . . . . . . . . . 67 tones . . . . . . . . . . . . . . . . . . . . . . . . 51 traditional text input . . . . . . . . .
