User's Guide

Make calls
97
1-touch dial a phone number
To activate 1-touch dialing, press , and select Tools >
Settings > Phone > Call > 1-touch dialing > On.
To assign a phone number to one of the 1-touch dialing
keys ( — ), press , and select Tools > 1-touch.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign. is reserved for
the voice mailbox, and for starting the web browser.
To call in the standby mode, press the speed dial key and
.
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialing.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number if it has been set. Otherwise the
device selects the first available number of the following:
Mobile, Mobile (home), Mobile (work), Telephone, Tel.
(home), and Tel. (work).
Draft