DR AF T RM-146 User Guide 924XXXX Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-146 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434 Copyright © 2006 Nokia. All rights reserved. T The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is".
Contents General information ................. 9 Access codes............................................ 9 Configuration settings service ........ 10 Download content .............................. 10 Nokia support....................................... 10 1. Get started ......................... 11 11 12 12 13 13 13 14 14 15 AF Install SIM card and battery ............ Insert a microSD card ........................ Remove the microSD card ............... Charge the battery..............................
Call........................................................... 52 Phone ...................................................... 53 Enhancements ...................................... 54 Configuration........................................ 54 Security .................................................. 55 Phone software updates.................... 56 Restore factory settings..................... 57 15. Applications ..................... 76 10. Operator menu ................ 57 17. Web.....................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST INTERFERENCE T Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS AF ■ About your device T Ensure the phone is switched on and in service.
For your safety device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 55. T PIN codes AF The personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 55.
General information ■ Configuration settings service To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support.
Get started 1. Get started ■ Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. DR AF To remove the back cover of the phone, push the back cover release button (1), and detach the back cover away from the phone (2).
Get started ■ Insert a microSD card T Replace the battery (7). Slide the back cover into its place (8, 9). Keep all microSD memory cards out of the reach of small children. AF 1. Remove the back cover of the phone. 2. Insert the card into the microSD card slot with the contact surface facing backwards, and press it until it locks into place. 3. Close the back cover of the phone. DR Use only compatible microSD cards with this device.
Get started 2. Remove the back cover of the phone. 3. Press the microSD card slightly in to release the lock, and remove the microSD card from the slot. ■ Charge the battery Check the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 or AC-4 charger. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model.
Get started Set the time and date Enter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See “Time and date,” p. 46. Plug and play service AF ■ Antenna T When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to support," p.
Get started Audio adaptor Use an audio adaptor AD-50 to connect a headphone with a 3.5-mm plug to your phone. If the adaptor is connected to the phone the earpiece of the phone will be disconnected. Please note that the adaptor does not support a microphone line. ■ Phone strap DR AF T Thread a strap through the eyelet of the phone as shown in the picture and tighten it.
Your phone 2.
Your phone Display Signal strength of the cellular network (1) Battery charge status (2) Indicators (3) Network name or operator logo (4) Clock (5) Main screen (6) T Function of left selection key (7) is Go to or a shortcut to another function. See “Left selection key,”p. 46. Function of middle selection key (8) is Menu. AF Function of right selection key (9) is Names or a shortcut to another function. See “Right selection key,” p. 46. Operator variants may have an operator-specific name.
Your phone Your phone is connected to the instant messaging service, and the availability status is online or offline. , You received one or several instant messages. The keypad is locked. The phone does not ring for an incoming call or text message. The alarm clock is activated. The countdown timer is running. The stopwatch is running. The phone is registered to the GPRS or EGPRS network. , A GPRS or EGPRS connection is established. , The GPRS or EGPRS connection is suspended (on hold).
Call functions Select Menu > Settings > Profiles > Flight > Activate or Personalise. To deactivate the flight mode, select any other profile. In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select Yes when asked Exit flight profile? The phone attempts to make an emergency call. ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, close the phone, and select Lock within 3.5 seconds.
Call functions country code, the area code without the leading 0, if necessary, and the phone number. 2. To call the number, press the call key. To increase the volume in a call, press + and to decrease, press - . 3. To end the call or to cancel the call attempt, press the end key, or close the phone. To search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 40. Press the call key to call the number.
Call functions Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in “My shortcuts,” p. 46. ■ Answer or reject a call To answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone. To reject an incoming call, press the end key. To mute the ringing tone, select Silence. Call waiting AF T To answer the waiting call during an active call (network service), press the call key.
Write text 4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. When you write text, press and hold Options to toggle between traditional text input, indicated by , and predictive text input, indicated by . Not all languages are supported by predictive text input. T The character cases are indicated by , , and . To change the character case, press #. To change from the letter to number mode, indicated by , press and hold #, and select Number mode.
Navigate the menus select Spell. Enter the word using traditional text input, and select Save. To write compound words, enter the first part of the word, and press the scroll key right to confirm it. Write the last part of the word, and confirm the word. 3. Start writing the next word. 5. Navigate the menus T The phone offers you an extensive range of functions, which are grouped into menus. AF 1. To access the menu, select Menu.
Messaging 6. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages and postcards. All messages are organized into folders. ■ Text message T With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service). AF Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 37.
Messaging 5. To send the message, select Send. See “Message sending,” p. 26. Read and reply to a message 1. To view a received message, select Show. To view it later, select Exit. To read the message later, select Menu > Messaging > Inbox. 2. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message. 3. Write the reply message. ■ Multimedia message T 4. To send the message, select Send. See “Message sending,” p. 26.
Messaging Write and send a multimedia plus message The wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS. Any content can be added to the multimedia plus message. Such content might be images, video clips, sound clips, business cards, calendar notes, themes, streaming links, or even unsupported files (for example, files received with an e-mail). 1.
Messaging Read and reply to a message Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. 1. To view a received message, select Show. To view it later, select Exit. 2. To view the whole message if the received message contains a presentation, select Play. To view the files in the presentation or the attachments, select Options > Objects or Attachments. 4. Write the reply message. T 3.
Messaging Write a message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number and write your message. To have a blinking text, select Options > Insert blink charact.. The text behind the marker blinks until a second marker is inserted. Receive a message T A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read.
Messaging messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If more messages are to be deleted, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. ■ Folders The phone saves received messages in the Inbox folder. Messages that have not yet been sent are saved in the Outbox folder. T To set the phone to save the sent messages in the Sent items folder, see Save sent messages in “General settings,” p. 37.
Messaging Check your e-mail settings with your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 10. To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See “E-mail messages,” p. 39. This application does not support keypad tones. Setting wizard T The setting wizard will start automatically if no e-mail settings are defined in the phone.
Messaging Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check for new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. 2. Select Back > Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message.
Messaging Spam filter To activate and define a spam filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows you to put specific senders on a black or white list. Black list sender messages are filtered to the junk folder. Unknown and white list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.
Messaging Connect To connect to the service, access the instant messages menu, select the IM service, if needed, and select Login. To disconnect from the IM service, select Options > Logout. Sessions When connected to the service, your status, as seen by others, is shown in a status line: My status: Online, My status: Busy or Status: Appear off. — to change own status, select Change.
Messaging your nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can create a private group. See “Groups,” p. 35. Search > Users or Groups — to search for other IM users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID.
Messaging Add IM contacts When connected to the IM service, in the IM main menu, select Options > Add contact > By mobile number, Enter ID manually, Search from server, or Copy from server (depending on service provider). Scroll to a contact. To start a conversation, select Chat. Block or unblock messages When you are in a conversation and want to block messages, select Options > Block contact.
Messaging ■ Voice messages The voice mailbox is a network service to which you may need to subscribe. For more information contact your service provider. To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice msgs.. To enter, search for, or edit your voice mailbox number, select Voice mailbox no.. If supported by the network, indicates new voice messages. To call your voice mailbox number, select Listen.
Messaging ■ Message settings General settings General settings are common for text and multimedia messages. Select Menu > Messaging > Message settings > General settings and from the following options: Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folder T Overwriting in Sent > Allowed — to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you set Save sent messages > Yes.
Messaging Messages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service) Use packet data > Yes — to set GPRS as the preferred SMS bearer Character support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. Rep.
Contacts Allow adverts — to receive or reject advertisements. This setting is not shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject. Configuration sett. > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a MMS account contained in the active configuration settings.
Contacts The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts. The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by . ■ Search for a contact Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for.
Contacts To copy or move several contacts, select the first contact to copy or move and Options > Mark. Mark the other contacts, and select Options > Copy marked or Move marked. To copy or move all contacts from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Copy contacts or Move contacts. The SIM card memory can save names with one phone number attached to them. ■ Edit contact details AF T Search for the contact, and select Details.
Contacts ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card. When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.
Call log assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in “Call,” p. 52. To make a call using the speed-dialing keys, see “Speed dialing,” p. 20.
Settings ■ Positioning information AF T The network may send you a positioning request (network service). Contact your service provider to subscribe and to agree upon the delivery of positioning information. To accept or reject the positioning request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request.
Settings Select theme — to set a theme. A list of folders in Gallery opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones You can change the tone settings of the selected active profile. Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See Personalise in “Profiles,” p. 44. T To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for.
Settings Font size — to set the font size for messaging, contacts, and web pages Operator logo — to set your phone to display or hide the operator logo. Cell info display > On — to display the cell identity, if available from the network ■ Time and date To change the time, time zone, and date settings, select Menu > Settings > Time and date > Time, Date, or Auto-update of time (network service).
Settings Navigation key To assign other phone functions from a predefined list to the navigation key (scroll key), select Menu > Settings > My shortcuts > Navigation key. Voice commands To call contacts and carry out phone functions, say the voice commands. Voice commands are language-dependent. To set the language, see Voice playback lang. in “Phone,” p. 53. AF T To select the phone functions to activate with a voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder.
Settings There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Features using Bluetooth technology or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life. Set up a Bluetooth connection T Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet).
Settings If you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree. Infrared You can set up the phone to send and receive data through its infrared (IR) port to or from a IRDA compatible phone or data device. Do not point the IR beam at anyone's eyes or allow it to interfere with other IR devices. Infrared devices are Class 1 laser products.
Settings Always online — to set the phone to automatically connect to a packet data network when you switch the phone on Modem settings You can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the phone as a modem to enable GPRS connectivity from the PC.
Settings transfer contact > Phone synchronisation or Phone copy, and enter the settings according to the transfer type. To edit the copy and synchronize settings, select a contact from the transfer contact list and Options > Edit. To delete a transfer contact, select it from the transfer contact list and Options > Delete. Data transfer with a compatible device For synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving data.
Settings USB data cable You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode.
Settings Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 21. Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.
Settings Phone updates — to receive phone software updates from your service provider (network service). This option may not be available, depending on your phone. See “Phone software updates,” p. 56. Operator selection > Automatic — to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your service provider. Confirm SIM actions — See “SIM services,” p. 78.
Settings Default config. sett. — to view the service providers saved in the phone. To set the configuration settings of the service provider as default settings, select Options > Set as default. Activ. def. in all apps. — to activate the default configuration settings for supported applications Preferred access pt. — to view the saved access points.
Settings DR AF T Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required. Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card. When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection.
Operator menu Settings To allowed or disallow phone software updates, select Menu > Settings > Configuration > Device manager sett. > Serv. softw.
Gallery information contact your network operator. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 82. 11. Gallery T In this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or an attached microSD memory card and may be arranged in folders. AF Your phone supports an activation key system to protect acquired content.
Gallery ■ Memory card Keep all memory cards out of the reach of small children. You can use the microSD memory card to store your multimedia files such as video clips, music tracks, and sound files, images, and messaging data. Some of the folders in Gallery with content that the phone uses (for example, Themes) may be stored on the memory card. Format the memory card T To insert and remove the microSD memory card, see “Insert a microSD card,” p. 12 and “Remove the microSD card,” p. 12.
Media 12. Media When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. ■ Camera and video You can take images or record video clips with the built-in camera. Take an image AF To take an image in landscape format, hold the phone in a horizontal position. To zoom in and out in the camera mode, use the volume keys (2).
Media to resume the recording, select Continue; to stop the recording, select Stop. The phone saves the images on the memory card. Camera and video options To use a filter, select Options > Effects >False colours, Greyscale, Sepia, Negative, or Solarise. To change the camera and video settings, select Options > Settings. ■ Media player T With the media player you can view, play, and download files, such as images, audio, video, and animated images.
Media Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Music files stored in the music folder in the phone memory or on the memory card will automatically be detected and added to the music library during the startup of the phone. To open the music player, select Menu > Media > Music player. Playing the music tracks Warning! Listen to music at a moderate level.
Media refresh the lists. Track lists generated with the Nokia Music Manager you will find under Track lists > My track lists. Play options — Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly. Media equaliser — to select or define an equalizer setting.
Media 2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9. 3. Enter the name of the radio station. Listen to the radio Select from the following options: AF Switch off — to turn off the radio T Select Menu > Media > Radio. To scroll to the desired frequency, select or , or press the headset key.
Media ■ Voice recorder You can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later. The recorder cannot be used when a data call or GPRS connection is active. Record sound 1. Select Menu > Media > Voice recorder. on the display, scroll left or T To use the graphical keys , , or right to the desired key, and select it. AF 2. To start the recording, select .
Push to talk ■ Stereo widening Stereo widening enhances the audio output of stereo enhancements by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening. 13. Push to talk If available, select Menu > Push to talk. T Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). AF You can use PTT to have a conversation with one person or with a group of people (channel) having compatible devices.
Push to talk You can set the status of each channel to Active or Inactive. The number of active channels and the number of members per channel is limited. Contact your service provider for details. Create a channel To add a channel, select Menu > Push to talk > Add channel, and enter the settings in the form fields: Channel name: — Enter a name for the new channel. T Channel status: — Select Active to set the channel active or Inactive to disable the channel.
Push to talk ■ Switch PTT on and off To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or press and hold the PTT (volume up) key. indicates the PTT connection. indicates that the service is temporarily unavailable. If you have added channels to the phone, you are automatically joined to the active channels. You may assign a default function to the PTT (volume up) key to open the channel list, the contacts list or a single channel or contact. See “PTT settings,” p. 71.
Push to talk Make a one-to-one call To start a one-to-one call from the list of contacts to which you have added the PTT address, select Contacts > Names or Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the PTT (volume up) key. To start a one-to-one call from the list of PTT channels, select Channel list, scroll to the desired channel, and select Members. Scroll to the desired contact, and press and hold the PTT (volume up) key.
Push to talk When you press and hold the PTT (volume up) key while the caller is talking, you hear a queuing tone, and Queuing is displayed. Press and hold the PTT (volume up) key, and wait for the other person to finish; then you can talk immediately. ■ Callback requests If you make a one-to-one call and do not get a response, you can send a request for the person to call you back.
Push to talk To delete the request, select Delete. To save a new contact or add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact. ■ Add a one-to-one contact You can save the names of persons to whom you often make one-to-one calls in the following ways: T To add a PTT address to a name in Contacts, search for the desired contact, select Details > Options > Add detail > PTT address.
Organizer PTT status in startup > Yes or Ask first— to set the phone to automatically connect to the PTT service when you switch the phone on PTT when abroad — to switch the PTT service on or off when the phone is used outside of the home network Send my PTT address > No — to hide your PTT address from channel and one-to-one calls ■ Configuration settings T You may receive the settings for connecting to the service from your service provider. See “Configuration settings service,” p. 10.
Organizer To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. To set a snooze time-out, select Snooze time-out and the time.
Organizer Make a calendar note Select Menu > Organiser > Calendar. Scroll to the date, and select Options > Make a note and one of the following note types: Meeting, Call, Birthday, Memo, or Reminder. Fill in the fields. Note alarm T The phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze.
Organizer Note: This calculator has limited accuracy and is designed for simple calculations. Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation. Press # for a decimal point. Scroll to the desired operation or function, or select it from the Options. Enter the second number. Repeat this sequence as many times as it is necessary. To start a new calculation, first select and hold Clear.
Applications Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset.
Applications Select Menu > Applications > Collection. Scroll to an application, and select Open.
SIM services 16. SIM services Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.
Web ■ Connect to a service Ensure that the correct configuration settings of the service are activated. 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration sett.. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 78. T 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web Direct calling While browsing, you can make a phone call, and save a name and a phone number from a page. ■ Bookmarks You can save page addresses as bookmarks in the phone memory. 1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks. T 2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark. AF 3.
Web Alerts > Alert for unsec. items > Yes — to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 83. Character encoding > Content encoding — to select the encoding for the browser page content Character encoding > Unicode (UTF-8) addr.
Web ■ Service inbox The phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service. To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.
Web To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache. ■ Browser security Security module T Security features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.
PC connectivity To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates. is displayed during a connection, if the data transmission between the phone and the content server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure.
PC connectivity a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). Download the PC Suite from the CD delivered with your phone. You may find more information on the Nokia Web site at www.nokia.com/support or your local Nokia Web site.
Battery information For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call. 19. Battery information ■ Charging and discharging AF T Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
Battery information or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. ■ Nokia battery authentication Always use original Nokia batteries for your safety.
Battery information 3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row. 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
Technical Information 20. Technical Information 106 grams (3.8 ounces) incl. BL-5B battery Battery 860 mAh Li-Ion Battery Networks Wireless networks GSM 900, 1800 and 1900 Size Volume: 5.2 cubic inches (85 ccm) Length: 3.6 in (92 mm) Width: 1.9 in (48 mm) Thickness: 0.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment AF T Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away.
Additional safety information propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders. ■ Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.
Additional safety information transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.80 W/kg.
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. AF T A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you. 3. Position your wireless phone within easy reach.
APPENDIX 9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone! 10. Use your wireless phone to help others in emergencies.
APPENDIX phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects.
APPENDIX FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon.
APPENDIX exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.
APPENDIX more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption.
APPENDIX result in consumers being exposed to any known risk from the RF emitted by cellular telephones. FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years).
