User's Guide

Push to talk
87
D
RAFT
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you have
added the PTT address, select Contacts > Names or Menu > Push to
talk > Contacts list. Scroll to a contact, and press and hold the PTT
(volume up) key.
To start a one-to-one call from the list of PTT channels, select Channel
list, scroll to the desired channel, and select Members. Scroll to the
desired contact, and press and hold the PTT (volume up) key.
To start a one-to-one call from the list of callback requests you have
received, select Callback inbox. Scroll to the desired nickname, and press
and hold the PTT (volume up) key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients
receive an incoming call and need to accept the call in order to
participate. If supported by your network operator, you also may select
contacts with a phone number but without PTT number. For details,
contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired
contacts.
2. Press and hold the PTT (volume up) key to start the call. The
participating contacts are shown on the display, as soon as they join
the call.
3. Press and hold the PTT (volume up) key to talk to them. Release the
PTT (volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Informations, such as
the channel, the phone number, or the nickname (network service) of
the caller are displayed.
You can either accept or reject an incoming one-to-one call if you have
set the phone to first notify you of the one-to-one calls.
FCC_6126H_6133H_en_1_FCC.fm Page 87 Tuesday, June 27, 2006 1:35 PM