User's Guide

Settings
68
D
RAFT
PIN2 code request — to select whether the PIN2 code is required when
using a specific phone feature which is protected by the PIN2 code.
Some SIM cards do not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls
from your phone (network service). A barring password is required.
Fixed dialling — to restrict your outgoing calls to selected phone
numbers if this function is supported by your SIM card
Closed user group — to specify a group of people whom you can call and
who can call you (network service)
Security level > Phone — to set the phone to ask for the security code
whenever a new SIM card is inserted into the phone. If you select
Memory, the phone asks for the security code when the SIM card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2
code, or barring password
Code in use — to select whether the PIN code or UPIN code should be
active
Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your phone. See
“Certificates,” p. 100.
Security module settings — to view Security module details, activate
Module PIN request, or change the module PIN and signing PIN. See also
“Access codes,” p. 9.
■ Phone software updates
Your service provider may send phone software updates over the air
directly to your device. This option may not be available, depending on
your phone.
Warning: If you install a software update, you cannot use the
device, even to make emergency calls, until the update is
completed and the device is restarted. Be sure to backup data
before accepting a software update.
FCC_6126H_6133H_en_1_FCC.fm Page 68 Tuesday, June 27, 2006 1:35 PM