Dr af t1 Nokia 6234 User Guide 9246861 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-123 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.
Contents Contents For your safety.......................... 6 Equalizer................................................ 36 General information................. 9 7. Web ..................................... 37 Access codes............................................ 9 Configuration settings service ........ 10 Download content and applications 10 Nokia support and contact information........................................... 11 Basic steps to access and use services ..................................
Contents Service commands .............................. 66 Delete messages .................................. 67 Message settings ................................. 67 11.My Items ........................... 71 Format memory card .......................... 71 12.Organizer........................... 72 72 73 74 74 74 75 75 17.SIM Toolkit (STK)........... 105 af t1 Alarm clock............................................ Calendar ................................................. To-do list...............
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST af t1 Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS af t1 Ensure the phone is switched on and in service.
For your safety device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 102. PIN codes af t1 If you enter an incorrect security code five times in succession, the phone ignores further entries of the code. Wait for 5 minutes, and enter the code again.
General information Barring password The barring password (4 digits) is required when you use the Call barring service. See “Security,” p. 102. You can obtain the password from your service provider. If you enter an incorrect barring password three times in succession, the password is blocked. Contact your service provider or network operator.
General information ■ Nokia support and contact information Check www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.
Get started 1. Get started ■ Install the SIM card and the battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. This device is intended for use with the BP-6M-S battery.
Get started 4. Replace the battery (7) 7 af t1 5. Place the back cover in the correct position (8). Dr 6. Slide the back cover into place (9). ■ Install a memory card The phone’s microSD card included with your phone contains preloaded ringing tones, themes, tones, and graphics. If you delete, reload, or replace this card, these functions and features may not function properly. Use only compatible microSD cards with this device.
Get started Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device. You can use a memory card to extend the memory of My Items. See “My Items,” p. 71. You can insert or change the memory card without switching the phone off. Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
Get started Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord. 1. Connect the charger to a wall outlet. af t1 2.
Get started Plug and play service When you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to serv. support in “Configuration,” p. 101 and “Configuration settings service,” p. 10. ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna.
Your phone 2.
Your phone • Volume keys (13) • Infrared (IR) port (14) • Camera lens (15) af t1 • Camera key (16) ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode. • 3G indicator (1) • Signal strength of the cellular network (2) Dr • Battery charge level (3) • Indicators (4) • The name of the network or the operator logo (5) • Clock (6) • Display (7) • The left selection key (8) is Go to or a shortcut to another function.
Your phone Active standby In the active standby mode, the phone can display separate content item windows, such as shortcuts (1), audio functions (2), the calendar (3), and a user note (4). To select whether active standby is shown, see Active standby in “Standby settings,” p. 89. af t1 When active standby is idle, to access the menu structure, select Menu (5). To access the features in active standby, press the navigation key up or down.
Your phone Countdown timer — To start the countdown timer, select the content item. The remaining time with a note is shown. General indicators — To show standby indicators, such as date, cell info display, info messages, PTT default group name and closed user group index. The date is shown if the calendar is not selected as active standby content. Standby mode shortcuts • To access the list of dialed numbers, press the call key once. See “Make a voice call,” p. 23.
Your phone The keypad is locked. The phone does not ring for an incoming call or text message. See also “Tones,” p. 89. The alarm clock is set to On. The countdown timer is running. The stopwatch is running in the background. The phone is registered to a GPRS, EGPRS, or WCDMA network. / A packet data connection is established. / The packet data connection is suspended (on hold), for example, if there is an incoming or outgoing call during a packet data dial-up connection.
Your phone To unlock the keypad select Unlock, and press within 1.5 seconds. If the Security keyguard is set On, select Unlock, press , and enter the security code. * * To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks. For Automatic keyguard and Security keyguard, see “Phone,” p. 100. Dr af t1 When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions 3. Call functions ■ Make a voice call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. af t1 3. To end the call, or to cancel the call attempt, press the end key.
Call functions Make a voice dialing call If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing in GSM. In WCDMA it is possible to send voice and data simultaneously. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 100. Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
Call functions ■ Options during a voice call Many of the options that you use during a call are network services. For availability, contact your network operator or service provider. Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker, or Handset.
Call functions animation is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead. Tip: To increase or decrease the volume during a call, press the volume keys. The video call is active when you can see two video images and hear the sound through the loudspeaker.
Write text 4. Write text To enter text (for example, when writing messages), use traditional or predictive text input. To use traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. ■ Settings af t1 When you write text, or appears at the top left of the display, indicating predictive text input, and appears, indicating traditional text input.
Write text 1. To start writing a word, use the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined. If you select Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, that are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List, Grid, Grid with labels or Tab. af t1 To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes. 2.
Media 6. Media ■ Camera You can take photos or record video clips with the built-in 2 megapixel camera. The camera produces pictures in .jpg format and video clips in .3gp format, and you can digitally zoom up to eight times. Take a photo 1. To open the camera viewfinder, select Menu > Media > Camera. af t1 If Video is selected as the default mode, select Options > Still image. To zoom in or out, press the volume key up or down, or the left/right navigation key.
Media stop the recording, select Stop. The phone saves the recording in My Items > Video clips. To change the folder for saving the recordings, see “Camera settings,” p. 31. Camera settings Select Menu > Media > Camera > Options > Settings. You can define Image quality, Image size, Video clip quality, Video clip length, Camera sounds, Default title, Image and video storage, and Default mode. In Image and video storage you can select the folder or memory card to save your photos and video clips.
Media See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 101. To activate the settings, do the following: 1. Select Menu > Media > Media player > Streaming settings > Configuration 2. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal configuration for streaming. 3. Select Account and a streaming service account contained in the active configuration settings.
Media Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Music player settings In the Music player menu, the following options may be available: Play via bluetooth — to make a connection to an audio enhancement using a Bluetooth connection af t1 Track list — to view all the tracks available on the track list.
Media ■ Radio The FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Select Menu > Media > Radio.
Media Note: This feature may not be available in your product due to your subscription (network service). Visual Radio settings — to select the options for Visual Radio. To set whether the Visual Radio application starts automatically when you turn on the radio, select Enable visual service > Automatically. Stations — to select the list of saved channels. To delete or rename a channel, scroll to the desired channel, and select Options > Delete station or Rename.
Media hear a faint beeping sound about every 5 seconds. When recording a call, hold the phone in the normal position near to your ear. 3. To end the recording, select Recordings. . The recording is saved in My Items > 4. To listen to the latest recording, select Options > Play last recorded. 5. To send the last recording using infrared, Bluetooth wireless technology, or a multimedia message, select Options > Send last recorded.
Web 7. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. af t1 With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size.
Web 1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings. 2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 37. 3. Select Account and a browsing service account contained in the active configuration settings. 4.
Web To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *. Options while browsing Select from the following options: Home — to return to your start page Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts. Add bookmark — to save the page as a bookmark af t1 Bookmarks — to access the list of bookmarks. See “Bookmarks,” p. 39.
Web Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site. Receive a bookmark af t1 When you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To save the bookmark, select Show > Save. To view or delete the bookmark, select Options > View or Delete.
Web JavaScript > Enable — to enable the Java scripts ■ Security settings Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 42. af t1 While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.
Web To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete. Service inbox settings Select Menu > Web > Settings > Service inbox settings. To set whether you want to receive service messages, select Service messages > On or Off.
Web Security module The security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider. To view or change the security module settings, select Menu > Settings > Security > Security module settings.
Web Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign is shown, which may include the amount and date. Check that the header text is Read and that the digital signature icon is shown.
Applications (Apps.) 8. Applications (Apps.) ■ Games The microSD card of your phone may contain games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open, or press the call key. af t1 For options related to a game, see “Application options,” p. 45. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown; see “Bookmarks,” p. 39.
Applications (Apps.) Details — to give additional information about the application Update version — to check if a new version of the application is available for download from Web (network service) Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application. Application access — to restrict the application from accessing the network. Different categories are shown.
Applications (Apps.) ■ Presenter The Presenter application is compatible with Microsoft Office PowerPoint and enables you to control slide presentations, a software DVD, an MP3 player, or other PC applications remotely from your device. To use applications other than slide presentations and desktop mode, you must create a corresponding custom profile on the PC application. Before you can use the application you must do the following: 1. Install the Nokia Presenter PC application on your PC.
Applications (Apps.) automatically controls your mouse pointer. To return to the list of applications, select Options > Application list. Dr af t1 To quit the Presenter, select Options > Exit.
Push To Talk (PTT) 9. Push To Talk (PTT) Note: This feature may not be available in your product due to your subscription (network service). Push To Talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect, press the PTT key. af t1 You can use PTT to have a conversation with one person or with a group of people having compatible devices.
Push To Talk (PTT) To disconnect from the PTT service, select Switch PTT off. ■ Make and receive a PTT call Set the phone to use the loudspeaker or earpiece for PTT communication. When the earpiece is selected, you can use the phone normally, by holding it to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. af t1 When connected to the PTT service, you can make or receive channel calls, group calls, or one-to-one calls.
Push To Talk (PTT) Make a one-to-one call To start a one-to-one call from the list of contacts to which you added the PTT address, select Contacts list. Scroll to a contact, and press the PTT key. You can also select the contact from Contacts. To start a one-to-one call from the list of PTT channels, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and press the PTT key.
Push To Talk (PTT) Send a callback request You can send a callback request in the following ways: • To send a callback request from the contacts list in the PTT menu, select Contacts list. Scroll to a contact, and select Options > Send callback. • To send a callback request from Contacts, search for the desired contact, select Details, scroll to the PTT address, and select Options > Send callback.
Push To Talk (PTT) • To add a PTT address to a name in Contacts, search for the desired contact, and select Details > Options > Add detail > Push To Talk address. • To add a contact to the PTT contacts list, select Menu > Push To Talk > Contacts list > Options > Add contact. • To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options.
Push To Talk (PTT) Receive an invitation When you receive an invitation to a group, Channel invitation received: is displayed. 1. To view the contact who sent the invitation and the channel address if the group is not a private channel, select View. 2. To add the channel to your phone, select Save. 3. To set the status for the channel, select Active or Inactive. To reject the invitation, select View > Discard > Yes.
Push To Talk (PTT) PTT key default function is used to select the default action of the PTTkey. It can be set to opening the Contacts list or Channel list. It can also be set to directly create a PTT call from any state (unless any other contact, group or channel is highlighted) to a contact, channel or group.
Messaging 10. Messaging You can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders. ■ Text messages (SMS) With the short message service (SMS) you can send and receive text messages (network service). af t1 Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 67. To check SMS e-mail service availability and to subscribe to the service, contact your service provider.
Messaging 3. Scroll down, and write your message in the Message: field. See “Write text,” p. 27. To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 59. Read and reply to an SMS message 1 message received or the number of new messages with messages received are shown when you have received a message. af t1 1. To view a new message, select Show. To view it later, select Exit.
Messaging To read SIM messages, select Menu > Messaging > Options > SIM messages. ■ Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. To check availability and to subscribe to the multimedia messaging network service, contact your network operator or service provider. See “Multimedia message,” p. 68.
Messaging card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide. To insert a file in the message, select Insert or Options > Insert. You can fetch images and video clips from the My Items, or to take them directly from the viewfinder, select Options > Insert > New Image or New video clip. 3. To view the message before sending it, select Options > Preview. 4.
Messaging the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later. Cancel message sending When the phone is saving a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel. To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.
Messaging ■ Memory full When you are receiving a message, and the memory for the messages is full, Memory full, not possible to receive message(s) is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked. ■ Folders af t1 To free phone memory, delete photos, ringing tones, or other data in the phone memory.
Messaging Write a flash message Select Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number in the To: field. Write your message in the Message: field. The maximum length of a flash message is 70 characters. To send the message, select Send. Receive a flash message af t1 A received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read.
Messaging Receive an audio message When your phone receives audio messages, the number of messages and the text messages received is shown. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. Select Options to see the available options.
Messaging Settings Wizard The settings wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New. af t1 The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See “Configuration,” p. 101. The e-mail application requires an Internet access point without a proxy.
Messaging Download e-mail 1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check for new e-mail. If more than one e-mail account is defined, select the account from which you want to download the e-mail. The e-mail application only downloads e-mail headers at first. 2. Select Back. 3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message.
Messaging To manage the folders and their e-mail content, select Options to view the available options of each folder. Spam filter af t1 The e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder.
Messaging ■ Delete messages To delete messages one by one, select Menu > Messaging > Delete messages > By message and the folder from which you want to delete messages. Scroll to the desired message, and select Delete. To mark more than one message, select Options > Mark. Mark all the messages you want to delete, and select Options > Delete marked. To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder to delete.
Messaging Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service) Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. If you select SIM message centre, you can view the SIM message center information.
Messaging Image size (multimedia) — to define the default image size used in multimedia messages Default slide timing — to define the default time between slides in multimedia messages Allow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when you are outside your home network. The default setting of the multimedia message service is generally In home network. af t1 Incoming multim. msgs.
Messaging E-mail address — Enter your e-mail address. Include signature — You can define a signature that is automatically added to the end of your e-mail when you write your message. Reply-to address — Enter the e-mail address to which you want the replies to be sent. SMTP user name — Enter the name that you want to use for outgoing mail. SMTP password — Enter the password that you want to use for outgoing mail.
My Items 11. My Items In this menu you can manage graphics, images, recordings, and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. af t1 The files stored in My Items use a memory that mainly consists of the microSD card of your phone.
Organizer 12. Organizer ■ Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organizer > Alarm clock. To set the alarm, select Alarm time, enter the alarm time, and select OK. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. af t1 To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone.
Organizer ■ Calendar Select Menu > Organizer > Calendar. The current day is indicated by a frame in the month view. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.
Organizer ■ To-do list To save a note for a task that you must do, select Menu > Organizer > To-do list. To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, select Save and the priority, and set the deadline and alarm for the note. To view a note, scroll to it, and select View. af t1 You can also select an option to delete the selected note and delete all the notes that you have marked as done.
Organizer Options > Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number. For a total, select Equals. To start a new calculation, first select and hold Clear. Convert currency af t1 Select Menu > Organizer > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one.
Organizer Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times.
Contacts 13. Contacts You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory. The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image or a video clip for a limited number of contacts. You can also use the video clip saved with a contact as a ringing tone for the contact. af t1 The SIM card memory can save names with one phone number attached to them.
Contacts 3. To add a number, select Number and a number type. To add another detail, select a text type, an image or a video clip from My Items, or a new image. To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.
Contacts and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from My Items. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card. To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card > Via multimedia, Via text message, Via infrared, or Via Bluetooth.
Contacts ■ Speed dials To assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want. Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in “Call,” p. 99. To make a call using the speed-dialing keys, see “Speed dialing,” p. 23.
Log 14. Log Note: This feature may not be available in your product due to your subscription (network service). To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.
Instant messages (IM) 15. Instant messages (IM) Note: This feature may not be available in your product due to your subscription (network service). Instant messaging (IM) (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. af t1 Before you can use instant messaging, you must subscribe to the service.
Instant messages (IM) Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging session Connection settings — to edit the settings needed for messaging and presence connection Connect to instant messaging To connect to the instant messaging service, access the Instant messages menu, select the desired instant messaging service if needed, and select Login. When the phone has successfully connected, Logged in is displayed.
Instant messages (IM) You can add contacts to the list. See “Contacts for instant messaging,” p. 86. Select Groups > Public groups (dimmed if groups are not supported by the network). The list of bookmarks to public groups provided by the network operator or service provider is displayed. To start a conversation, scroll to a group, and select Join. Enter the screen name that you want to use as a nickname in the conversation.
Instant messages (IM) If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open. New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. If the sender is in the phone memory and the phone recognizes it, the name of the person is displayed.
Instant messages (IM) Contacts for instant messaging To add contacts to the instant messaging contacts list, do the following: 1. Connect to the instant messaging service, and select IM contacts. 2. Select Options > Add contact, or if you have no contacts added, select Add. Select Enter ID manually, Search from server, Copy from server, or By mobile number. When the contact is successfully added, the phone confirms it. 3. Scroll to a contact, and to start a conversation, select Chat.
Instant messages (IM) To search for a group, select Groups > Search groups. You can search for a group by a member in the group or by group name, topic, or ID. Create a private group Dr af t1 Connect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.
Settings 16. Settings ■ Profiles Your phone has various setting groups, called profiles, which you can customize for different events and environments. Select Menu > Settings > Profiles and the desired profile. Select from the following options: Activate — to activate the selected profile af t1 Personalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time.
Settings ■ Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Select Menu > Settings > Themes and from the following options: Select theme — to set a theme in your phone. A list of folders in My Items opens. Open the Themes folder, and select a theme. Theme downloads — to open a list of links to download more themes ■ Tones af t1 You can change the settings of the selected active profile.
Settings Active standby > My active standby — to display the active standby. Select Options and from the following options: • Personalise — to change the content on the display • Organise — to reorganize the content on the display • Enabling active standby — to change the key for accessing the navigation mode. The same setting is also in the My shortcuts menu. See “Enable active standby,” p. 92.
Settings Sleep mode To save most battery power, select Menu > Settings > Display > Sleep mode. The display turns completely black when no function of the phone is used for a certain time. Font size To set the font size for reading and writing messages and viewing contacts and Web pages, select Menu > Settings > Display > Font size. ■ Time and date af t1 To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or Auto-update of date/time (network service).
Settings Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark. Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK. Right selection key Navigation key af t1 To select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key.
Settings Edit or Remove — to change or deactivate the voice command of the selected function. When you edit the voice tag text, the phone associates it to a new virtual voice tag. Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. Add all or Remove all is not shown if all voice commands are active or inactive.
Settings Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates an active Bluetooth connection. When activating Bluetooth technology for the first time, you are asked to give a name for the phone. Please note that this name will be viewed by other people use a unique name that is easy for others to identify. Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone.
Settings Infrared You can send or receive data to or from a compatible phone or data device (for example, a computer) through the infrared (IR) port of your phone. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
Settings The applications that may use WCDMA or (E)GPRS are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up. When you have selected GPRS as a data bearer, the phone uses EGPRS instead of GPRS if this is available in the network. You cannot select between EGPRS and GPRS, but for some applications you may be able to select GPRS or GSM data (circuit switched data, CSD).
Settings p. 106. If you have set the settings both on your PC and on your phone, the PC settings are used. Data transfer Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service). Partner list af t1 To copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts.
Settings Data transfer without SIM card Your phone allows data transfer when the SIM card is not inserted. Switch on your phone with no SIM card inserted, and select Transfer and from the following options: Send data — to select a contact, other than Server synchronisation and PC synchronisation, from the partner list to transfer data from your phone. The phone starts a synchronization or copy session.
Settings USB data cable You can use the USB data cable to transfer data between the memory card inserted in the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite. To activate the memory card for data transfer or picture printing, connect the USB data cable; when the phone displays USB data cable connected. Select mode., select OK.
Settings Send my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network. ■ Phone Select Menu > Settings > Phone and from the following options: Language settings — to set the display language of your phone, select Phone language. If you select Automatic, the phone selects the language according to the information on the SIM card. To select the USIM card language, select SIM language.
Settings Start-up tone — to select whether the phone plays a tone when the phone is switched on. Flight query —to select whether Activate flight profile? appears every time the phone is switched on if the flight mode was set before switching off the device. See “Flight mode,” p. 88. ■ Enhancements This menu is shown only if the phone is or has been connected to a compatible mobile enhancement. af t1 Select Menu > Settings > Enhancements.
Settings Activ. default in all apps. — to activate the default configuration settings for supported applications Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number. Connect to serv. support — to download the configuration settings from your service provider if this is supported by the service provider ■ Security af t1 Personal config.
Settings Closed user group — to specify a group of people whom you can call and who can call you (network service) Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Security level > Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.
Settings ■ Restore factory settings Dr af t1 To reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code.
SIM Toolkit (STK) 17. SIM Toolkit (STK) Your SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services. For availability, rates, and information on using SIM ToolKit services, contact your SIM card vendor, for example, network operator, service provider, or other vendor.
PC connectivity 18. PC connectivity You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through an IR, Bluetooth wireless technology, or USB data cable connection. You can use your phone with a variety of PC connectivity and data communications applications. ■ Nokia PC Suite af t1 With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service).
PC connectivity Dr af t1 For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Battery information 19. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Technical Information 20. Technical Information Weight 100 grams (3.5 ounces) incl. BP-6M battery Battery 1100 mAh Li-Ion Battery Networks Wireless networks GSM 900, 1800, 1900 and WCDMA: UTRA FDD Operating Band II Size Volume: Length: Width: Thickness: af t1 4.6 cubic inches (76 ccm) 4.3 in (109 mm) 1.8 in (46,5 mm) 0.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment af t1 Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker • Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device, and move the device away. Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Index Index A D access codes 9 activation keys 103 active standby 90, 92 alarm clock 72 applications 45 audio messages 62 data communication 106 data transfer 97 date settings 91 dialed numbers 81 digital rights management 103 digital signature 44 download applications 46 games 45 protected files 103 B e-mail application 63 emergency calls 115 end key 17 ending a call 24 enhancements settings 101 equalizer 36 C F af t1 barring password 10 battery 108 authentication 109 installation 12 Bluetooth 93
Index R L lock the keypad 21 log 81 radio 34 received calls 81 restore factory settings 104 ringing tones 24, 89 M S maintenance 112 media player 31 memory card 13, 71 memory card slot 18 message center number 56 message counter 81 message templates 61 missed calls 81 multimedia messages 58 music player 32 mute 24 My Items 71 my numbers 80 safety 6, 113 emergency calls 115 explosive environments 114 hearing aids 114 medical devices 113 pacemakers 113 vehicles 114 screen saver 90 security code 9 secur
Index volume keys 17 V W vibrating alert 89 voice commands 92 voice dialing 23 voice messages 66 voice recorder 35 wallpaper 89, 90 Web 37 writing language 27 Dr af t1 USB data cable 99 119
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use af t1 Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. af t1 2.
APPENDIX times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
APPENDIX What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
APPENDIX exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones.
APPENDIX key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
APPENDIX then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.
APPENDIX the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate.
