Product and safety information 2015-10-08 Issue 1.
For your safety Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further information, read the complete user guide. TURN OFF IN RESTRICTED AREAS Turn the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws.
SAR This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 5/8 inch (1.5 centimeters) away from the body. The specific maximum SAR values can be found in the Certification Information (SAR) section of this user guide. For more information, go to www.sar-tick.com.
Antenna locations Learn where the antennas are located on your phone to get the best possible performance. Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the communication quality and may reduce battery life due to higher power level during operation. The antenna areas are highlighted. Troubleshooting and support When you want to learn more about your phone, or if you're unsure how your phone should work, there are several support channels for you to check.
• Discussions • News on apps and downloads • Software update info • Further details about features and technologies, and the compatibility of devices and accessories Troubleshooting and discussions may not be available in all languages. For support videos, go to www.youtube.com/ lumiasupport. For questions regarding your plans, billing, or network, please contact your operator. For questions regarding your product and warranty, please visit the support pages for your country at www.microsoft.
If your issue remains unsolved, contact your network service provider or the manufacturer for repair options. Before sending your phone for repair, always back up your data, as all personal data in your phone may be deleted. Tip: If you need to identify your phone, to view the unique IMEI number of the phone, dial *#06#. You can also find the IMEI number in the phone body. For details, see the product and safety information section in the online user guide.
connect to a Wi-Fi network to, for example, browse the internet or turn Bluetooth on in airplane mode. Contents of digital maps may sometimes be inaccurate and incomplete. Never rely solely on the content or the service for essential communications, such as in emergencies. Important: Before sharing your location, consider carefully with whom you are sharing. Check the privacy settings of the social networking service you are using, as you might share your location with a large group of people.
Important: 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection speed from 4G to 3G. To do this, swipe left on the start screen, and tap Settings > Network & wireless > Cellular & SIM.
• Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it. • Do not open the device other than as instructed in the user guide. • Unauthorized modifications may damage the device and violate regulations governing radio devices. • Do not drop, knock, or shake the device or the battery. Rough handling can break it.
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Only replace the battery with a battery that is compliant with the IEEEstd-1725 standard. Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725.
Medical devices Operation of radio transmitting equipment, including wireless phones, may interfere with inadequately shielded medical devices' function. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy. Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 6 inches (15.3 centimeters) between a wireless device and the medical device.
To use a telecoil-equipped hearing aid with this device, activate the hearing aid (T switch) and the device telecoil. The sound quality depends on the type of your hearing aid. Nickel The surface of this device is nickel-free. Information on health The U.S. Food and Drug Administration (FDA) and the U.S. Federal Communications Commission (FCC) published statements and questions and answers concerning mobile telephones and health.
The Cellular Telecommunications & Internet Association (CTIA) has published further info and tips on safe use of cellular telephones at www.ctia.org/consumer_info/safety, which we encourage you to review. Potentially explosive environments Turn your device off in potentially explosive environments, such as near gas station pumps. Sparks may cause an explosion or fire resulting in injury or death. Note restrictions in areas with fuel; chemical plants; or where blasting operations are in progress.
centimeters) from the body Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) and Industry Canada SAR (IC) guidelines. FCC ratings for your device and more information on SAR can be found at transition.fcc.gov/oet/rfsafety/sar.html. Information on IC SAR can be found at www.ic.gc.ca. This device meets RF exposure guidelines when used against the head or when positioned at least 5/8 inch (1.5 centimeters) away from the body.
Care For questions regarding your plans, billing or network please contact your operator. For questions regarding your product and warranty, please visit the support pages for your country at www.microsoft.com/ mobile/support. Copyrights and other notices Declaration of Conformity Hereby, Microsoft Mobile Oy declares that this RM-1105 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.
particular products, services and features may vary by region. Please check with your local dealer for further details and availability of language options. FCC notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more information, go to transition.fcc.
Manufacturer’s limited warranty 1. General Microsoft Mobile Inc. provides this Manufacturer's Limited Warranty (“Warranty”) for genuine product (the “Product”) which has been released for sale in the United States of America, and Microsoft Mobile Canada Inc. provides this Warranty for Product which has been released for sale in Canada (“Covered Countries”). As applicable, “Manufacturer” as used throughout, means either Microsoft Mobile Inc. or Microsoft Mobile Canada Inc.
(together "Manufacturer software") will meet your requirements, work in combination with any hardware or software not provided by Manufacturer, is uninterrupted or error free or that errors are correctable or will be corrected.
4 If you have not installed the latest software updates that are publicly available for your Product within a reasonable time of their release; or 5 If you refuse to give possession of the Product to Manufacturer for repair and investigation. If this Warranty does not cover your Product or the issue based on which it requires service, Manufacturer reserves the right to charge for the repair or replacement of your Product, as well as a handling fee. 4.
send any Notice of Dispute by U.S. Mail to Microsoft Mobile Inc., ATTN: LCA ARBITRATION, One Microsoft Way, Redmond WA 98052-6399. A form is available at go.microsoft.com/fwlink/?linkid=245499. Manufacturer will send any Notice of Dispute to you by U.S. Mail to your address if we have it, or otherwise to your e-mail address. You and Manufacturer will attempt to resolve any dispute through informal negotiation within 60 days from the date the Notice of Dispute is sent.
arbitrator may award the same damages to you individually as a court could. The arbitrator may award declaratory or injunctive relief only to you individually, and only to the extent required to satisfy your individual claim 6 Arbitration Fees and Payments. (a) Disputes Involving $75,000 or Less. Manufacturer will promptly reimburse your filing fees and pay the AAA’s and arbitrator’s fees and expenses.
7. Other important notices For further information on your Warranty, as well as information needed to process your warranty queries, please visit www.microsoft.com/ mobile. All parts of this Limited Warranty apply to the maximum extent permitted by law or unless prohibited by law. Please ensure your operator has removed any SIM-locks (or other equivalent mechanisms that may lock your Product to a specific network or operator) prior to delivering your Product for repair.
