User's Guide

2. Enter the official emergency number for your present location.

Emergency call numbers vary by location.

3. Tap call.

4. Give the necessary info as accurately as possible. Do not end the call

until given permission to do so.

You may also need to do the following:

• Put a SIM card in the phone. If you don’t have a SIM, tap emergency

call when you get an error message about a missing SIM.

• If your phone asks for a PIN code, tap emergency call.

• Switch off the restrictions in your phone, such as call restriction, fixed

dialing, or closed user group.

• When you switch your phone on for the first time, you are asked to

create your Microsoft account and set up your phone. To make an

emergency call during the account and phone setup, tap emergency

call.

Take care of your device

See the in-device user guide for important instructions on how to take

care of your device.

Do not drop, knock, or shake the device or the battery. Rough handling

can break them.

About Digital Rights Management

When using this device, obey all laws and respect local customs, privacy

and legitimate rights of others, including copyrights. Copyright

protection may prevent you from copying, modifying, or transferring

photos music, and other content.

Battery and charger info

Use your device only with an original BV-T4B rechargeable battery.

Charge your device with AC-20U charger. Charger plug type may vary.

Third-party chargers that comply with the IEC/EN 62684 standard, and

that can connect to your device micro USB connector, may be

compatible.

Microsoft Mobile may make additional battery or charger models

available for this device.

Only replace the battery with a battery that is compliant with the IEEE-

std-1725 standard.

Only use the battery with a charging system that has been qualified with

the system per CTIA Certification Requirements for Battery System

Compliance to IEEE 1725.

The phone shall only be connected to CTIA certified adapters, products

that bear the USB-IF logo, or products that have completed the USB-IF

compliance program.