Product and safety information RM-1041 123123 Issue 1 EN
For your safety We invite you to read the instructions on this guide before using the device. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving.
5/8 inch (1.5 centimetres) away from the body. The specific maximum SAR values can be found in the Certification Information (SAR) section of this user guide. For more info, go to www.sar-tick.com. When a carry case, belt clip or other form of device holder is used for body-worn operation, it should not contain metal and should provide at least the above-stated separation distance from the body. Note that mobile devices may be transmitting even if you are not making a voice call.
Antenna locations Learn where the antennas are located on your phone to get the best possible performance. Avoid touching the antenna area while the antenna is in use. Contact with antennas affects the communication quality and may reduce battery life due to higher power level during operation. The antenna areas are highlighted. Troubleshooting and support When you want to learn more about your phone, or if you're unsure how your phone should work, there are several support channels for you to check.
To help you get the most out of your phone, there's a user guide in your phone with additional instructions. Tap Lumia Help + Tips. You can also go to www.microsoft.com/mobile/ support/, where you can find: • Full-length user guides • Troubleshooting info • Discussions • News on apps and downloads • Software update info • Further details about features and technologies, and the compatibility of devices and accessories Troubleshooting and discussions may not be available in all languages.
personal content, including apps you've purchased and downloaded. On the start screen, swipe down from the top of the screen, and tap ALL SETTINGS > about > reset your phone. If your issue remains unsolved, contact your network service provider or Microsoft Mobile for repair options. Before sending your phone for repair, always back up your data, as all personal data in your phone may be deleted.
the terms. If you do not accept the terms, do not use the device or software. Instead contact Microsoft Mobile or the party from which you purchased the device to determine its return policy. Find your model number and serial number (IMEI) If you need to contact your care point or your service provider, you may need info such as the model number and the serial number (IMEI). To see the info, tap Settings > about. You can also find the info on your phone label, which is located under the battery.
4. Give the necessary info as accurately as possible. Do not end the call until given permission to do so. You may also need to do the following: • • If your phone asks for a PIN code, tap emergency call. • Switch the call restrictions off in your phone, such as call barring, fixed dialling, or closed user group. • When you switch your phone on for the first time, you are asked to create your Microsoft account and set up your phone.
protection may prevent you from copying, modifying, or transferring photos, music, and other content. Battery and charger info Use your device only with an original BV-T5A rechargeable battery. Charge your device with AC-20AR, AC-20E, or AC-50U charger. Charger plug type may vary. Third-party chargers that comply with the IEC/EN 62684 standard, and that can connect to your device micro USB connector, may be compatible.
Medical devices Operation of radio transmitting equipment, including wireless phones, may interfere with inadequately shielded medical devices' function. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy. Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless device and the medical device.
To use a telecoil-equipped hearing aid with this device, activate the hearing aid (T switch) and the device telecoil. The sound quality depends on the type of your hearing aid. Nickel The surface of this device is nickel-free. Information on health The U.S. Food and Drug Administration (FDA) and the U.S. Federal Communications Commission (FCC) published statements and questions and answers concerning cellular telephones and health.
Certification information (SAR) This mobile device meets international guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields), recommended by international guidelines from the independent scientific organization ICNIRP.
During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values.
Microsoft Mobile U chargers only. Input 100-240 Vca 50-60 Hz 60-300 mA Output 5.0 Vcc 350-1 500 mA Rechargeable battery supplier Microsoft Mobile Phone power consumption 3,7 Vcc Copyrights and other notices Declaration of Conformity Hereby, Microsoft Mobile Oy declares that this RM-1041 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.microsoft.
improvements to any of the products described in this document without prior notice. Downloading of maps, games, music and videos and uploading of images and videos may involve transferring large amounts of data. Your service provider may charge for the data transmission. The availability of particular products, services and features may vary by region. Please check with your local dealer for further details and availability of language options.
and commercial uses, may be obtained from MPEG LA, LLC. See www.mpegla.com (in English). Manufacturer and warranty info Microsoft Mobile Oy (Ltd) has purchased the devices and services business from Nokia. The manufacturer of this product is Microsoft Mobile Oy (Ltd) or any of its affiliates, even if “Nokia Corporation” or any of its affiliates may still be visible in the sales package, documentation, or the product itself.
(ii) Twelve (12) months for accessories sold separately or included in the sales pack of the main device excluding batteries, covers, cables and chargers; and (iii) Six (6) months for all batteries, covers, cables and chargers, unless otherwise specified in the Product user guide.
Manufacturer (please read the terms and conditions that may accompany the services as those will define your rights and obligations); 3 Any (i) normal wear and tear, (ii) reduced charging capacity of the battery resulting from its natural end of product life, or (iii) pixel defects in your Product’s display that are within the scope of industry standards; 4 SIM card and/or any cellular or other networks or system on which your Product operates; or 5 Errors or damage caused by: (i) misuse or not using your P
5. CHOICE OF LAW The laws of the State or Province where you live (or if a business your principal place of business) govern the interpretation of this warranty, any claim that Manufacturer has breached it, and all other claims (including consumer protection, unfair competition, implied warranty, and tort claims), regardless of conflict of law principles, except that the Federal Arbitration Act governs all provisions relating to arbitration. 6.
4 Class Action Waiver. Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither you nor Manufacturer will seek to have any dispute heard as a class action, private attorney general action, or in any other proceeding in which either party acts or proposes to act in a representative capacity.
Manufacturer commences, Manufacturer will pay all filing, AAA, and arbitrator’s fees and expenses. Manufacturer will not seek its attorney’s fees or expenses from you in any arbitration. Fees and expenses are not counted in determining how much a dispute involves. 7 Conflict with AAA Rules. This warranty governs to the extent it conflicts with AAA’s Commercial Arbitration Rules and Supplementary Procedures for Consumer-Related Disputes. 8 Claims or Disputes Must Be Filed Within One Year.