28 Apr 2005 USER GUIDE Following is a preliminary draft copy of the US English User Guide for FCC ID: LJPRM-104 Exhibit 8: User Guide Applicant: Nokia Corporation FCC ID: LJPRM-104 Copyright © 2005 Nokia. All rights reserved.
User guide 9238054 FCC draft
DECLARATION OF CONFORMITY We, NOKIA CORPORATION, declare under our sole responsibility that the product RM-104 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life.
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document.
Manufactured or sold under one or more following US Patents. Asterisk (*) indicates design patents pending.
Contents For your safety......................... 8 5. Navigate the menus ........... 28 General information .............. 11 6. Messages ............................. 29 Overview of functions ........................ 11 Access codes ......................................... 11 Security code..................................... 11 PIN codes............................................ 11 PUK codes........................................... 12 Barring password .............................
Voice messages.................................... Info messages ...................................... Service commands .............................. Delete messages .................................. Message settings................................. Text and SMS e-mail...................... Multimedia........................................ E-mail ................................................. Other settings................................... Message counter .................................
Create and set up groups .................. 75 Add a group ....................................... 75 Receive an invitation ...................... 76 PTT settings ........................................... 76 14.Sports ................................ 78 Compass ................................................. 78 Calibrate the compass .................... 78 Set the declination .......................... 79 Set and reset the direction............ 79 Stopwatch .............................................
For your safety For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLS Ensure the phone is switched on and in service.
For your safety changes in menu names, menu order and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols.
General information General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio and a built-in camera. Your phone also supports the following functions: • Enhanced data rates for GSM evolution (EDGE): see “Packet data (EGPRS),” p. 59 • Extensible hypertext markup language (XHTML): see “Web,” p. 91 • E-mail application: see “E-mail application,” p.
General information The module PIN is required to access the information in the security module. See “Security module,” p. 96. The signing PIN is required for the digital signature. See “Digital signature,” p. 98. PUK codes The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.
General information To discard the received settings, select Exit or Show > Discard. To edit the settings, see “Configuration,” p. 62. ■ Download content and applications You may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.
Get started 1. Get started ■ Install the SIM card and battery Always switch the device off and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or another vendor. This device is intended for use with a BL-5B battery.
Get started Lift the battery from the compartment (4). Slide the cover of the SIM card holder toward the bottom end of the phone until it unlocks (5). Swing the cover of the SIM card holder open (6). Insert the SIM card into the holder. Ensure that the beveled corner of the SIM card is on the left, and the golden contact area is facing down (7). Close the cover of the SIM card holder (8).
Get started into place (9). Position the battery with the contacts aligned to the golden contacts on the phone. Insert the battery into the battery slot, contact end first (10). Close the battery flap (11). Place the phone into the lower shell, sliding the shell forward until it locks into place (12). Always use original Nokia batteries. See the “Nokia battery authentication guidelines,” p. 102.
Get started If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display, or before calls can be made. The charging time depends on the charger and the battery used. For example, charging a BL-5B battery with the ACP-12 charger takes approximately 1 hour and 10 minutes while the phone is in the standby mode.
Get started ■ Wrist strap Connect the elastic band to the holster (1). Connect the pins on the end of the holster to the holes in the lower end of the phone (2). Connect the pin on the other end of the holster to the hole in the top end of the phone (3). Wrap the elastic band, for example, around your wrist and connect the band to the holster (4). Connect the hook to the loop on the elastic band. The hook contains a magnifying glass and a whistle (5).
Your phone 2. Your phone ■ Keys and parts • Flashlight (1). To activate it, press and hold # in the standby mode. • Power key to turn the phone on and off (2) • Bubble level to level the phone while using the compass, and standby light (3) • Volume keys to adjust the volume of the earpiece, loudspeaker, or headset when connected to the phone (4) • Push to talk (PTT) key (5) • Left selection key, middle selection key and right selection key (6).
Your phone • Charger connector (1) • Pop-PortTM connector used, for example, with headsets and the data cable (2) • Camera lens (3) • Infrared (IR) port (4) ■ Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.
Your phone you have selected: see “My shortcuts,” p. 57. Operator variants may have an operator-specific name to access an operator-specific Web site. Personal shortcut list The left selection key is Go to. To view the functions in the personal shortcut list, select Go to. To activate a function select it. To view a list with available functions, select Go to > Options > Select options. To add a function to the shortcut list, select Mark. To remove a function from the list, select Unmark.
Your phone Indicators You received one or several text or picture messages. See “Read and reply to a SMS message,” p. 30. You received one or more multimedia messages. See “Read and reply to a multimedia message,” p. 33. The phone registered a missed call. See “Call register,” p. 53. The keypad is locked. See “Keypad lock (keyguard),” p. 23. The phone does not ring for an incoming call or text message when Incoming call alert and Message alert tone are set to Off. See “Tones,” p. 55.
Your phone ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, select Menu, and press within 3.5 seconds to lock the keypad. * To unlock the keypad, select Unlock, and press . If the Security keyguard is set On, enter the security code if requested. * To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks again. For Automatic keyguard and Security keyguard, see “Phone,” p. 60.
Call functions 3. Call functions ■ Make a call 1. Enter the phone number, including the area code. For international calls, press twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number. * 2. To call the number, press the call key. 3. To end the call or to cancel the call attempt, press the end key, or close the phone.
Call functions Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox) rejecting an incoming call will also diverts the call. See “Call,” p. 60. If a compatible headset supplied with the headset key is connected to the phone, to answer and end a call, press the headset key. Call waiting To answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.
Write text 4. Write text You can enter text (for example, when writing messages) using traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. In predictive text input you can enter a letter with a single keypress. When you are writing text, predictive text input is indicated by and traditional text input by at the top left of the display.
Write text If ? is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Enter the word (traditional text input is used), and select Save. 3. Start writing the next word. Write compound words Enter the first part of the word, and press the scroll key right to confirm it. Write the last part of the word, and confirm the word. ■ Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears.
Navigate the menus 5. Navigate the menus The phone offers you an extensive range of functions, which are grouped into menus. 1. To access the menu, select Menu. To change the menu view, select Options > Main menu view > List or Grid. 2. Scroll through the menu and select a submenu (for example, Settings). 3. If the menu contains submenus, select the one that you want (for example, Call settings). 4. If the selected menu contains further submenus, select the one that you want (for example, Anykey answer).
Messages 6. Messages The message services can only be used if they are supported by your network or service provider. Note: When sending messages, your phone may display the words Message sent. This is an indication that the message has been sent by your device to the message centre number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.
Messages At the top of the display, you can see the message length indicator that tracks the number of characters available. For example, 10/2 means that you can still add 10 characters for the text to be sent as two messages. Write and send a SMS message 1. Select Menu > Messages > Create message > Text message. 2. Enter a message. See “Write text,” p. 26. To insert text templates or a picture into the message, see “Templates,” p. 31. Each picture message comprises several text messages.
Messages replying to an e-mail, first confirm or edit the e-mail address and subject. 4. To send the message to the displayed number, select Send > OK. Templates Your phone has text templates and picture templates can use in text, picture, or SMS e-mail messages. that you To access the template list, select Menu > Messages > Saved items > Text messages > Templates. ■ Multimedia messages (MMS) A multimedia message can contain text, sound, a picture, a calendar note, a business card, or a video clip.
Messages New image opens the Camera — to take a new image to be added to the message New sound clip opens the Recorder — to make a new record to be added to the message Business card or Calendar note — to insert a business card or a calendar note in the message. Slide — to insert a slide to the message. Your phone supports multimedia messages that contain several pages (slides). Each slide can contain text, one image, a calendar note, a business card, and one sound clip.
Messages Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. Read and reply to a multimedia message The default setting of the multimedia message service is generally on. Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When your phone receives a multimedia message, the animated displayed.
Messages When you have a new multimedia message waiting and the memory for the messages is full, blinks and Multimedia memory full. View waiting msg. is shown. To view the waiting message, select Show. Before you can save the waiting message, delete old messages to free memory space. To save the message, select Save. To discard the waiting message, select Exit > Yes. If you select No, you can view the message. ■ Flash messages Flash messages are text messages that are instantly displayed upon reception.
Messages 2. When the message is ready to send, select Options > Play to check the message before sending, Replace sound clip to repeat the recording, Save message, Save sound clip to save the recording in Gallery, Edit subject to insert a subject to the message, Message details to view the message details, or Loudspeaker or Handset. 3. To send the message, select Send > Recently used, To phone number, To e-mail address, or To many. Depending on your operator, more options may be available. 4.
Messages To organize your text messages, you can move some of them to My folders or add new folders for your messages. Select Messages > Saved items > Text messages > My folders. To add a folder, select Options > Add folder. If you have not saved any folders, select Add. To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder. ■ Instant messages (IM) Instant messaging (network service) is a way to send short, simple text messages to online users.
Messages Connect. settings — to edit the settings needed for messaging and presence connection Connect to the instant messaging service To connect to the instant messaging service, enter the Instant messages menu, activate an instant messaging service, and select Login. When the phone has successfully connected, Logged in is displayed. To disconnect from the instant messaging service, select Logout. Start an instant messaging session Open the Instant messages menu, and connect to the service.
Messages conversation, you can start a group conversation. To create a private group, see “Groups,” p. 40. • Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID. To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group.
Messages to access available options: View conversation, Save contact, Group members, Block contact, End conversation. Edit your availability status 1. Open the Instant messages menu, and connect to the instant messaging service. 2. To view and edit your own availability information or screen name, select My settings. 3. To allow all other instant messaging users to see you when you are online, select Availability > Available for all.
Messages To unblock the messages, connect to the instant messages service and select Blocked list. Scroll to the contact from whom you want to unblock messages, and select Unblock. Groups You can create your own private groups for an instant messaging conversation, or use the public groups provided by the service provider. The private groups exist only during an instant messaging conversation. The groups are saved on the server of the service provider.
Messages • Obtain a new e-mail account or use the current one. Regarding the availability of your e-mail account, contact your e-mail service provider. • For the settings required for e-mail, contact your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 12. You can also enter the settings manually. See “Configuration,” p. 62.
Messages Read and reply to e-mail Select Menu > Messages > E-mail > Inbox. While reading the message, select Options to view the available options. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply. To send the message, select Send > Send now. Inbox and other folders Your phone saves e-mail that you have downloaded from your e-mail account in the Inbox folder.
Messages ■ Info messages Select Menu > Messages > Info messages. With the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider. ■ Service commands Select Menu > Messages > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services.
Messages Multimedia The message settings affect the sending, receiving, and viewing of multimedia messages. Select Menu > Messages > Message settings > Multimedia msgs.
Messages To activate the settings for the e-mail application, select Menu > Messages > Message settings > E-mail messages and from the following options: Configuration — Select the set that you would like to activate. Account — Select an account provided by the service provider. My name — Enter your name or nickname. E-mail address — Enter e-mail address. Include signature — You can define a signature that is automatically added to the end of your e-mail when you write your message.
Contacts 7. Contacts You can save names and phone numbers (Contacts) in the phone memory and in the SIM-card memory. The phone memory can save contacts with numbers and text items. You can also save an image for a certain number of names. Names and numbers saved in the SIM-card memory are indicated by . ■ Search for a contact Select Menu > Contacts > Names > Options > Search. Scroll through the list of contacts or enter the first letter of the name for which you are searching.
Contacts To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 48. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. 4.
Contacts To delete a number, text item, or an image attached to the contact, search for the contact, and select Contact details. Scroll to the desired detail, and select Options > Delete > Delete number, Delete detail, or Delete image. Deleting an image from contacts does not delete it from Gallery. ■ Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.
Contacts shown for a certain amount of time to viewers depending on the service provider. Select Menu > Contacts > My presence and select from the following options: Connect to 'My presence' service or Disconnect from service — to connect to or disconnect from the service. View my presence — to view the status in Private pres. and Public presence. Edit my presence — to change your presence status. Select My availability, My presence message, My presence logo, or Show to.
Contacts View the subscribed names To view presence information, see “Search for a contact,” p. 46. 1. Select Menu > Contacts > Subscribed names. The status information of the first contact on the subscribed names list is displayed. The information that the person wants to give to the others may include text and some of the following icons: , , or available. indicates that the person is available, discreet or not indicates that the person’s presence information is not available. 2.
Contacts ■ Voice dialing You can make a phone call by saying a voice tag that has been added to a phone number. Any spoken words, such as a name, can be a voice tag. The number of voice tags you can create is limited. Before using voice tags, note that: • Voice tags are not language-dependent. They are dependent on the speaker's voice. • You must say the name exactly as you said it when you recorded it. • Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.
Contacts Make a call with a voice tag If the phone has an application running that is sending or receiving data using a GPRS connection, you must end the application before voice dialing. 1. In the standby mode, press and hold the volume down key. A short tone is heard, and Speak now is displayed. 2. Say the voice tag clearly. The phone plays the recognized voice tag, and dials the phone number of the voice tag after 1.5 seconds.
Call register 8. Call register The phone registers the phone numbers of identified, missed, received, and dialed calls; the message recipients; and the approximate length of your calls. The phone registers if it is switched on and within the network’s service area, and the network supports these functions.
Call register service provider. The phone displays 1 missed position request. To view the missed location request, select Show. To view the information on the 10 most recent privacy notifications and requests, or to delete them, select Menu > Call register > Positioning > Position log > Open folder or Delete all.
Settings 9. Settings ■ Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments. Select Menu > Settings > Profiles. Scroll to a profile, and select it. To activate the selected profile, select Activate. To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end.
Settings Message alert tone, Instant message alert tone, Keypad tones, Warning tones and Alert for. You can find the same settings in the Profiles menu. See “Profiles,” p. 55. To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark.
Settings Idle state font colour — to select the color for the texts on the display in the standby mode. Operator logo — to set your phone to display or hide the operator logo. The menu is dimmed, if you have not saved the operator logo. For more information on availability of an operator logo, contact your network operator or service provider.
Settings and select Add. indicates a voice tag. To add a voice command, see “Add and manage voice tags,” p. 51. To activate a voice command, see “Make a call with a voice tag,” p. 52. ■ Connectivity You can connect your phone to compatible devices using an infrared connection. You can also define the settings for packet data dial-up connections. Infrared You can set up the phone to send and receive data through its infrared (IR) port.
Settings Packet data (EGPRS) Enhanced general packet radio service (EGPRS), packet data, is a network service which allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet. The applications that may use packet data are MMS, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.
Settings ■ Call Select Menu > Settings > Call and from the following options: Automatic volume control — to set the phone to automatically adjust the speaker volume according to the background noise Call divert (network service) — to divert your incoming calls. You may not be able to divert your call, if some call barring functions are active. See Call barring service in “Security,” p. 63.
Settings Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On. When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Cell info display > On — to receive information from the network operator depending on the network cell used (network service).
Settings ■ Configuration You can configure your phone with settings that are required for certain services to function correctly. The services are browser, multimedia messaging, remote Internet server synchronization, presence, and e-mail application. Get the settings from your SIM card, from a service provider as a configuration message, or enter your personal settings manually. You can store configuration settings from up to 10 service providers in the phone and manage them within this menu.
Settings ■ Security When security features that restrict calls are in use (such as call barring, closed user group and fixed dialing) calls still may be possible to the official emergency number programmed into your device. Select Menu > Settings > Security and from the following options: PIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.
Operator menu 10. Operator menu This menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information, contact your network operator. If this menu is not shown the following menu numbers change accordingly. The operator can update this menu with a service message. For more information. See to “Service inbox,” p. 95.
Gallery 11. Gallery In this menu you can manage graphics, images, recordings, video clips, themes, tones and received files. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.
Media 12. Media Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded. ■ Camera You can take photos or record video clips with the built-in camera. The camera produces pictures in JPEG format and video clips in 3GP format. When taking and using images or video clips, obey all laws and respect local customs as well as the privacy and legitimate rights of others.
Media Select Menu > Media > Radio. To use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it. To change the volume, press the volume keys. Save radio channels 1. To start the channel search, select and hold or the radio frequency in 0.05 MHz steps, briefly press . To change or . 2. To save the channel to a memory location, 1 to 9, press and hold the corresponding number key.
Media When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio. ■ Recorder You can record pieces of speech, sound, or an active call for 3 minutes. The recorder cannot be used when a data call or packet data connection is active. Record sound 1. Select Menu > Media > Recorder. To use the graphical keys, , , or right to the desired key, and select it. , on the display, scroll left or 2. To start the recording, select .
Media You cannot measure the noise level during a call or while a headset is connected to the phone. To start sound monitoring, select Menu > Media > Sound meter. The sound meter bar graphically shows the noise level, and the peak level is indicated. The upper number indicates the peak level and the lower framed number the current level of the sound. To open the list of options, select Options.
Push to talk 13. Push to talk Push to talk (PTT) over cellular is a two-way radio service available over a GSM/GPRS cellular network (network service). PTT provides direct voice communication. To connect to, press the PTT key. You can use PTT to have a conversation with one person or with a group of people having compatible devices. When your call is connected, the person or group you are calling does not have to answer the phone.
Push to talk • To set the required settings for the PTT connection, select Config. settings. • To open the browser and to connect to the PTT network portal provided by the service provider, select Web. ■ Connect to and disconnect PTT To connect to the PTT service, select Menu > Push to talk > Switch PTT on. indicates the PTT connection. indicates that the service is temporarily unavailable. The phone automatically tries to reconnect to the service until you disconnect from the PTT service.
Push to talk The icon behind the contact in the list denotes current login status: , , or indicate that the person is either available, unavailable, or unknown, indicates that the login status is not available. The login status is only available for subscribed contacts. To change the subscribed contacts, select Options and from the available contact list options Subscribe contact or Unsubscr. contact, or if one or more contacts are already marked Subscribe marked or Unsubscribe marked.
Push to talk • To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired nickname, and press the PTT key. Receive a PTT call A short tone notifies you of an incoming group and one-to-one call. When receiving a group call, the group name and the nickname of the caller are displayed.
Push to talk • To send a callback request from Contacts, search for the desired contact, select Options > Contact details, scroll to the PTT address, and select Options > Send callback. • To send a callback request from the group list in the PTT menu, select Group list, and scroll to the desired group. Select Options > Active members, scroll to the desired contact, and select Options > Send callback.
Push to talk • To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact. • To add a contact from the group list, connect to the Push to talk service, select Group list, and scroll to the desired group. Select Options > Active members. Scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add to contact.
Push to talk the group. Only the person who creates the private group can invite more members to the group. Enter the name for the group. Select Default, Listened, or Inactive. The phone indicates that the group is saved and its status. Default and Listened are active groups. When you press the PTT key to make a group call, the default group is called if you have not scrolled to any other group or contact. To send an invitation to the group, select Yes when the phone requests it.
Push to talk Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations that support the PTT service are shown. Account — to select a PTT service account contained in the active configuration settings PTT user name, Default nickname, PTT password, Domain, and Server address To edit the PTT settings for use, select Menu >Push to talk > PTT settings. To select the phone to allow the reception of incoming one-to-one calls, select 1 to 1 calls > On.
Sports 14. Sports ■ Compass The phone has a digital compass that shows direction both graphically and in digits. The compass should always be properly calibrated. Electromagnetic fields, large metal objects, and other external circumstances may reduce the accuracy of the compass. Never rely solely on the phone compass. Proper calibration of the compass requires that you calibrate the compass against magnetic north and set the declination value according to your location.
Sports 3. To start the calibration, select Yes. Place the phone on a horizontal, level surface, and carefully rotate it; or, while holding it horizontally, slowly turn it around. Use the rotating graphic on the display to observe the speed of rotation. When the calibration is finished, Compass calibrated appears. Set the declination 1. Select Menu > Sports > Compass. 2. To set the declination, select Options > Settings > Variation > Set variation. To activate the last set declination value, select On. 3.
Sports intermediate time. To stop time observation, select Stop. To save the measured time, select Save. To start time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset. To set the stopwatch timing in the background, press the end key. Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.
Sports The thermometer provides general measurements for personal use that may vary from scientific measurements. Select Menu > Sports >Thermometer. To show (or hide) the temperature value in the standby mode, select Show thermom. (or Hide thermometer). To set the phone to show the temperature in either Celsius or Fahrenheit, select Temp. format.
Organiser 15. Organiser ■ Alarm clock You can set the phone alarm to sound at a desired time. Select Menu > Organiser > Alarm clock. To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm. To select the alarm tone or set a radio channel as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.
Organiser week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes. Other options for the day view may be Make a note, Delete, Edit, Move, or Repeat a note; Copy a note to another day; Send note as text message or multimedia message, with IR, or to the calendar of another compatible phone. In Settings you can set the date and time settings.
Organiser While viewing a note, you can also select an option to edit the deadline or priority for the note or mark the note as done. ■ Notes To use this application for writing and sending notes, select Menu > Organiser > Notes. To create a note if no note is added, select Add note; otherwise, select Options > Make a note. Write a note, and select Save. Other options for notes include deleting, and editing a note. While editing a note, you can also exit the text editor without saving the changes.
Organiser ■ Synchronization Synchronization allows you to save your calendar and Contacts data on a remote Internet server (network service) or on a compatible PC. If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone. To synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC, start the synchronization from the PC. The contact data in your SIM card is not synchronized.
Organiser 1. Select Menu > Organiser > Sync > Server sync > Sync settings and from the following options: Configuration — Only the configurations that support the synchronization are shown. Select a service provider, Default, or Personal config. for synchronization. Account— Select a synchronization service account contained in the active configuration settings. 2. Select PC sync settings to enter the settings for server alerted synchronization. Set the User name and Password.
Applications 16. Applications ■ Games Your phone software includes some games. Launch a game Select Menu > Applications > Games. Scroll to the desired game, and select Open. For options related to a game, see “Other application options,” p. 89. Game downloads Select Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown. Select More bookmarks to access the list of bookmarks in the Web menu. See “Bookmarks,” p. 94.
Applications Fitness coach Fitness coach is an interactive, personal trainer to help you improve your fitness level, strength, and endurance. Programs are created based on your personal data, whether for training indoors or outdoors. Before beginning a regular exercise program consult your physician or doctor. Warning: Exercise may include some risk, especially for those who have been sedentary. Before beginning a regular exercise program consult your physician or doctor.
Applications Polar applications are intended for use with compatible Polar heart rate monitors. For information on compatible devices, open the desired Polar application. After you complete your training session, you can transfer the training data from your compatible Polar heart rate monitors to your phone using IR for an instant review. To start a Polar application, select Menu > Applications > Collection. Scroll to the desired Polar application, and select Open.
Applications Activation key list — to view the list of all available activation keys. You can delete expired activation keys. Download an application Your phone supports J2METM Java applications. Make sure that the application is compatible with your phone before downloading it. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. You can download new Java applications in different ways.
Web 17. Web You can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software. Check the availability of these services, pricing, tariffs, and instructions with your service provider. With the phone browser, you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages – appearance may vary due to screen size.
Web Secondly, make a connection to the service in one of the following ways: • Select Menu > Web > Home or, in standby mode, press and hold 0. • To select a service bookmark, select Menu > Web > Bookmarks. • To select the last URL accessed, select Menu > Web > Last web address. • To enter the address of a service, select Menu > Web > Go to address, enter the address and select OK. ■ Browse pages After you make a connection to a service, you can start browsing its pages.
Web empty the cache after each use. The information or services you have accessed is stored in the cache. To empty the cache, see “Cache memory,” p. 96. Direct calling The browser supports functions that you can access while browsing. You can make a phone call, send DTMF tones while a voice call is in progress, and save a name and a phone number from a page. ■ Appearance settings While browsing, select Options > Other options > Appear.
Web ■ Cookies A cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory: see “Cache memory,” p. 96. While browsing, select Options > Other options > Security > Cookie settings or, in standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject. ■ Scripts over secure connections You can select whether to allow the running of scripts from a secure page.
Web Save. To view or delete the bookmark, select Options > View or Delete. To discard the bookmark as soon as you have received it, select Exit > OK. ■ Downloads To download more tones, images, games or applications to your phone (network service), select Menu > Web > Downloads > Tone downloads, Graphic downloads, Game downloads, Video downloads, Theme downloads, or App. downloads.
Web To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On (not available for all message types). If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message. ■ Cache memory A cache is a memory location that is used to store data temporarily.
Web Change module PIN — to change the module PIN, if allowed by the security module. Enter the current module PIN code, then enter the new code twice. Change signing PIN — to change the signing PIN code for the digital signature. Select the signing PIN you want to change. Enter the current PIN code, then enter the new code twice. See also “Access codes,” p. 11.
Web Digital signature You can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document. To make a digital signature, select a link on a page, for example, the title of a book you want to buy and its price. The text to sign, which may include the price and date, is shown. Check that the header text is Read and that the digital signature icon is shown.
SIM services 18. SIM services Your SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card. For availability, rates and information on using SIM services, contact your SIMcard vendor, for example, network operator, service provider or other vendor.
PC connectivity 19. PC connectivity You can send and receive e-mail and access the Internet when your phone is connected to a compatible PC through an infrared or a data cable (CA-42) connection. You can use your phone with a variety of PC connectivity and data-communications applications. ■ PC Suite With PC Suite, you can synchronize contacts, calendar and to-do notes, and notes between your phone and the compatible PC, or a remote Internet server (network service).
Battery information 20. Battery information ■ Charging and discharging Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery information ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps: Successful completion of the four steps is not a total assurance of the authenticity of the battery.
Battery information 4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck. To create a text message, enter the 20-digit code, for example, 12345678919876543210, and send it to +44 7786 200276. National and international operator charges will apply. You should receive a message indicating whether the code can be authenticated.
Technical Information 21. Technical Information Weight 100.8 grams (3.5 ounces) incl. BL-5B battery Battery 760 mAh Li-Ion Battery (Type BL-5B) Networks Wireless networks GSM 900, 1800 and 1900 Size Volume: 5.2 cubic inches (86 ccm) Length: 4.2 in (106.5 mm) Width: 1.8 in (46.8 mm) Thickness: 0.
CARE AND MAINTENANCE CARE AND MAINTENANCE Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.
Additional safety information Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children. ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions.
Additional safety information • always keep the device more than 15.3 cm (6 inches) from the pacemaker; • not carry the device in a breast pocket; and • hold the device to the ear opposite the pacemaker to minimize the potential for interference. If you suspect interference, switch off your device and move the device away. Hearing aids Some digital, wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.
Additional safety information operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.
Additional safety information the public, regardless of age and health and to account for any variations in measurements. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue.
APPENDIX APPENDIX ■ A message from the CTIA © 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081 Safety is the most important call you will ever make. A Guide to Safe and Responsible Wireless Phone Use Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone.
APPENDIX When it comes to the use of wireless phones, safety is your most important call. Wireless phone "Safety Tips" 1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road. 2.
APPENDIX times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue. 7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car.
APPENDIX stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
APPENDIX researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 2.
APPENDIX the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3. What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones.
APPENDIX 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists.
APPENDIX phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone? All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.
APPENDIX laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9.
APPENDIX was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones.
APPENDIX • World Health Organization (WHO) International EMF Project http://www.who.int/emf • National Radiological Protection Board (UK) http://www.nrpb.org.uk/ July 18, 2001 For updates: http://www.fda.
