User's Guide

Camera

Viewfinder indicators show the following:

• The device memory ( ) and memory card ( )

indicators (1) show where the video is saved.

• The microphone indicator shows that the

microphone is muted.

• The zoom indicator, which appears on the side pane,

shows the zoom level. Scroll up or down or use the side

volume key to zoom in or zoom out.

After a video clip is recorded:

• To immediately play the video clip you just recorded,

select Options > Play.

• If you do not want to keep the video, press , or

select Options > Delete.

• To send a video clip to the other party during an active

call, select Options > Send MMS.

Video settings

There are two kinds of settings for the video recorder:

temporary settings and default settings. To adjust contrast,

brightness, and color settings, see ‘Adjust color and

lighting’, p. 26. The temporary settings return to the

default settings after you close the camera, but the default

settings remain the same until you change them again. To

change the default settings, select Options > Settings >

Video and from the following:

Length: %U—To optimize video clips for MMS, select

Short.

Video resolution—Select High (CIF, 352x288), Normal

(QCIF 176x144), or Basic (SubQCIF 128x96). The higher

the resolution, the more memory the video consumes.

Default video name:—Set a name for the video taken.

Select Date or Text. If you select Text, the videos are

named in the format “Video” by default. For example, if

you set Beach as the default name, Camera names the

video clips you take Beach, Beach(001), Beach(002), and

so on, until you change the setting again.

Memory in use—Define the default memory store: device

memory or memory card (if inserted).