User's Guide

Camera

To add the current image to a contact card, select

Options > Add to contact

To rename the current image, select Options > Rename

image

Exposure modes

To set the camera to take six pictures in a sequence, select

Options > Sequence mode . You can also use the

sequence mode with the Self-timer. See ‘You in the

picture—self-timer’, p. 26. The pictures are automatically

saved in Gallery.

After you take the pictures, they are shown in a grid on

the main display. To view a picture, press the scroll key to

open it.

To set the camera to take pictures in low light conditions,

select Options > Night mode.

You in the picture—self-timer

The self-timer is available only in the main camera.

Use the self-timer to delay the capture so that you can

include yourself in the picture. To set the self-timer delay,

select Options > Self timer > 10 seconds, 20 seconds, or

30 seconds. To activate the self-timer, select Activate.

The self-timer indicator ( ) blinks and the device beeps

when the timer is running. The camera takes the picture

after the selected delay elapses.

You can also use the self-timer in the sequence mode.

Flash

The flash is available only in the main camera.

Keep a safe distance when using the flash. Do not use the

flash on people or animals at close range. Do not cover the

flash while taking a picture.

The camera has an LED flash for low light conditions. The

following flash modes are available: Automatic, On (),

and Off ().

To use the flash, select Options > Flash > On.

Adjust color and lighting

To enable the camera to reproduce colors and lighting

more accurately, select Options and from the following

options:

Flash (images only)—Set the flash according to the lighting

conditions. See ‘Flash’, p. 26.

Adjust > White balance—Select the current lighting

condition from the list. This allows the camera to

reproduce colors more accurately.

Adjust >Colour tone—Select a color effect from the list.