User Manual

Your phone
15
Your phone
Essential indicators
- The phone is being used in a GSM network.
(network service) - The phone is being used in a UMTS
network. The phone selects the GSM or UMTS network
automatically according to the network parameters and
the roaming agreements between the network operators.
- You have received one or several messages to the
Inbox folder in Messaging.
- There are messages waiting to be sent in Outbox. See
p. 57.
and - You have missed calls. See ‘Recent calls’,
p.25.
- Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set to
Off. See ‘Profiles - setting tones’, p. 12.
- The phone keypad is locked. See the Quick Start
Guide, ‘Keypad lock (Keyguard)’.
- You have an active alarm. See ‘Clock’, p. 16.
- All calls to the phone are diverted to another
number.
- A headset is connected to the phone.
- A loopset is connected to the phone.
- The connection to a Bluetooth headset has been lost.
- A data call is active.
- A packet data connection is available.
- A packet data connection is active.
- Shown when the packet data connection is on hold.
These icons are shown instead of the signal strength
indicator (shown in the top left corner in the standby
mode). See ‘Packet data connections in GSM and UMTS
networks’, p. 99.
- An UMTS connection is active.
- Bluetooth is active.
- Data is being transmitted using Bluetooth. See
‘Bluetooth connection’, p. 88.
- USB connection is active.
R0915_en.book Page 15 Wednesday, September 15, 2004 12:14 PM